Re: [PATCH v1] bus: qcom: Simplify with dev_err_probe()

[于佼良 <yujiaoliang@vivo.com>]

在 2024/8/30 16:09, Krzysztof Kozlowski 写道:
> On 29/08/2024 14:41, Yu Jiaoliang wrote:
>> Error handling in probe() can be a bit simpler with dev_err_probe().
>>
>> Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com>
>> ---
>>   drivers/bus/qcom-ebi2.c | 6 ++----
>>   1 file changed, 2 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/bus/qcom-ebi2.c b/drivers/bus/qcom-ebi2.c
>> index c1fef1b4bd89..dbd6a99bcc99 100644
>> --- a/drivers/bus/qcom-ebi2.c
>> +++ b/drivers/bus/qcom-ebi2.c
>> @@ -308,10 +308,8 @@ static int qcom_ebi2_probe(struct platform_device *pdev)
>>   		return PTR_ERR(ebi2xclk);
>>   
>>   	ret = clk_prepare_enable(ebi2xclk);
>> -	if (ret) {
>> -		dev_err(dev, "could not enable EBI2X clk (%d)\n", ret);
>> -		return ret;
>> -	}
>> +	if (ret)
>> +		return dev_err_probe(dev, ret, "could not enable EBI2X clk\n");
>>   
>>   	ebi2clk = devm_clk_get(dev, "ebi2");
>>   	if (IS_ERR(ebi2clk)) {
>
> This cannot defer, so not much benefits. And again you change only one
> place.
>
> That's pointless and churn.
>
> Best regards,
> Krzysztof
>
I apologize for the oversight. I will reconsider this modification and 
submit patches according to the granularity of the subsystem.

Best Regards,

Yu