From: "Avuton Olrich" <avuton@gmail.com>
To: "Jeff Garzik" <jeff@garzik.org>
Cc: linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org,
akpm@osdl.org, torvalds@osdl.org
Subject: Re: [RFT] major libata update
Date: Mon, 15 May 2006 20:36:51 -0700 [thread overview]
Message-ID: <3aa654a40605152036h40fa1cd0x8edd81431c1bd22d@mail.gmail.com> (raw)
In-Reply-To: <446914C7.1030702@garzik.org>
On 5/15/06, Jeff Garzik <jeff@garzik.org> wrote:
> Avuton Olrich wrote:
> > On 5/15/06, Jeff Garzik <jeff@garzik.org> wrote:
> >> * sata_sil and ata_piix also need healthy re-testing of all basic
> >> functionality.
> >
> > I'm testing it right now, but with 2.6.17-rc4-git2 I was getting:
>
> Testing what? sata_sil? Please provide full dmesg, there's a lot of
> missing information.
More followup, it did finally error out on me:
Not sure if it helps any, but this is a sata2 disk with a sata
interface. This is rc4-git2 with the libata patch from the beginning
of this thread, using sata_sil.
dmesg:
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x3 frozen
ata1.00: (BMDMA stat 0x1)
ata1.00: tag 0 cmd 0x25 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x3 frozen
ata1.00: (BMDMA stat 0x1)
ata1.00: tag 0 cmd 0x25 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x3 frozen
ata1.00: (BMDMA stat 0x1)
ata1.00: tag 0 cmd 0x25 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: limiting speed to UDMA/66
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x3 frozen
ata1.00: (BMDMA stat 0x1)
ata1.00: tag 0 cmd 0x25 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/66
ata1: EH complete
ata1.00: limiting speed to UDMA/44
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x3 frozen
ata1.00: (BMDMA stat 0x1)
ata1.00: tag 0 cmd 0x25 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/44
ata1: EH complete
ata1.00: limiting speed to UDMA/33
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x3 frozen
ata1.00: (BMDMA stat 0x1)
ata1.00: tag 0 cmd 0x25 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/33
sd 0:0:0:0: SCSI error: return code = 0x8000002
sda: Current: sense key=0xb
ASC=0x0 ASCQ=0x0
end_request: I/O error, dev sda, sector 703661647
ata1: EH complete
ata1.00: limiting speed to UDMA/25
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x3 frozen
ata1.00: (BMDMA stat 0x1)
ata1.00: tag 0 cmd 0x25 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/25
ata1: EH complete
NETDEV WATCHDOG: eth2: transmit timed out
ata1.00: limiting speed to UDMA/16
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x3 frozen
ata1.00: (BMDMA stat 0x1)
ata1.00: tag 0 cmd 0x25 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/16
ata1: EH complete
ata1.00: limiting speed to PIO4
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x3 frozen
ata1.00: (BMDMA stat 0x1)
ata1.00: tag 0 cmd 0x25 Emask 0x4 stat 0x40 err 0x0 (timeout)
ata1: soft resetting port
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for PIO4
ata1: EH complete
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e000.
diagnostics: net 0cc0 media 8080 dma 000000a0 fifo 8800
Flags; bus-master 1, dirty 18790(6) current 18806(6)
Transmit list 37e3c5c0 vs. f7e3c5c0.
0: @f7e3c200 length 8000002a status 0000002a
1: @f7e3c2a0 length 8000002a status 0000002a
2: @f7e3c340 length 8000002a status 0000002a
3: @f7e3c3e0 length 8000002a status 0000002a
4: @f7e3c480 length 8000002a status 8000002a
5: @f7e3c520 length 8000002a status 8000002a
6: @f7e3c5c0 length 8000005f status 0000005f
7: @f7e3c660 length 8000005f status 0000005f
8: @f7e3c700 length 8000002a status 0000002a
9: @f7e3c7a0 length 8000002a status 0000002a
10: @f7e3c840 length 8000002a status 0000002a
11: @f7e3c8e0 length 8000002a status 0000002a
12: @f7e3c980 length 8000002a status 0000002a
13: @f7e3ca20 length 8000002a status 0000002a
14: @f7e3cac0 length 8000002a status 0000002a
15: @f7e3cb60 length 8000002a status 0000002a
eth0: Resetting the Tx ring pointer.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e000.
diagnostics: net 0cc0 media 8080 dma 000000a0 fifo 8800
Flags; bus-master 1, dirty 18790(6) current 18806(6)
Transmit list 37e3c5c0 vs. f7e3c5c0.
0: @f7e3c200 length 8000002a status 0000002a
1: @f7e3c2a0 length 8000002a status 0000002a
2: @f7e3c340 length 8000002a status 0000002a
3: @f7e3c3e0 length 8000002a status 0000002a
4: @f7e3c480 length 8000002a status 8000002a
5: @f7e3c520 length 8000002a status 8000002a
6: @f7e3c5c0 length 8000005f status 0000005f
7: @f7e3c660 length 8000005f status 0000005f
8: @f7e3c700 length 8000002a status 0000002a
9: @f7e3c7a0 length 8000002a status 0000002a
10: @f7e3c840 length 8000002a status 0000002a
11: @f7e3c8e0 length 8000002a status 0000002a
12: @f7e3c980 length 8000002a status 0000002a
13: @f7e3ca20 length 8000002a status 0000002a
14: @f7e3cac0 length 8000002a status 0000002a
15: @f7e3cb60 length 8000002a status 0000002a
eth0: Resetting the Tx ring pointer.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e000.
diagnostics: net 0cc0 media 8080 dma 000000a0 fifo 8800
Flags; bus-master 1, dirty 18790(6) current 18806(6)
Transmit list 37e3c5c0 vs. f7e3c5c0.
0: @f7e3c200 length 8000002a status 0000002a
1: @f7e3c2a0 length 8000002a status 0000002a
2: @f7e3c340 length 8000002a status 0000002a
3: @f7e3c3e0 length 8000002a status 0000002a
4: @f7e3c480 length 8000002a status 8000002a
5: @f7e3c520 length 8000002a status 8000002a
6: @f7e3c5c0 length 8000005f status 0000005f
7: @f7e3c660 length 8000005f status 0000005f
8: @f7e3c700 length 8000002a status 0000002a
9: @f7e3c7a0 length 8000002a status 0000002a
10: @f7e3c840 length 8000002a status 0000002a
11: @f7e3c8e0 length 8000002a status 0000002a
12: @f7e3c980 length 8000002a status 0000002a
13: @f7e3ca20 length 8000002a status 0000002a
14: @f7e3cac0 length 8000002a status 0000002a
15: @f7e3cb60 length 8000002a status 0000002a
eth0: Resetting the Tx ring pointer.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e000.
diagnostics: net 0cc0 media 8080 dma 000000a0 fifo 8800
Flags; bus-master 1, dirty 18790(6) current 18806(6)
Transmit list 37e3c5c0 vs. f7e3c5c0.
0: @f7e3c200 length 8000002a status 0000002a
1: @f7e3c2a0 length 8000002a status 0000002a
2: @f7e3c340 length 8000002a status 0000002a
3: @f7e3c3e0 length 8000002a status 0000002a
4: @f7e3c480 length 8000002a status 8000002a
5: @f7e3c520 length 8000002a status 8000002a
6: @f7e3c5c0 length 8000005f status 0000005f
7: @f7e3c660 length 8000005f status 0000005f
8: @f7e3c700 length 8000002a status 0000002a
9: @f7e3c7a0 length 8000002a status 0000002a
10: @f7e3c840 length 8000002a status 0000002a
11: @f7e3c8e0 length 8000002a status 0000002a
12: @f7e3c980 length 8000002a status 0000002a
13: @f7e3ca20 length 8000002a status 0000002a
14: @f7e3cac0 length 8000002a status 0000002a
15: @f7e3cb60 length 8000002a status 0000002a
eth0: Resetting the Tx ring pointer.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e000.
diagnostics: net 0cc0 media 8080 dma 000000a0 fifo 8800
Flags; bus-master 1, dirty 18790(6) current 18806(6)
Transmit list 37e3c5c0 vs. f7e3c5c0.
0: @f7e3c200 length 8000002a status 0000002a
1: @f7e3c2a0 length 8000002a status 0000002a
2: @f7e3c340 length 8000002a status 0000002a
3: @f7e3c3e0 length 8000002a status 0000002a
4: @f7e3c480 length 8000002a status 8000002a
5: @f7e3c520 length 8000002a status 8000002a
6: @f7e3c5c0 length 8000005f status 0000005f
7: @f7e3c660 length 8000005f status 0000005f
8: @f7e3c700 length 8000002a status 0000002a
9: @f7e3c7a0 length 8000002a status 0000002a
10: @f7e3c840 length 8000002a status 0000002a
11: @f7e3c8e0 length 8000002a status 0000002a
12: @f7e3c980 length 8000002a status 0000002a
13: @f7e3ca20 length 8000002a status 0000002a
14: @f7e3cac0 length 8000002a status 0000002a
15: @f7e3cb60 length 8000002a status 0000002a
eth0: Resetting the Tx ring pointer.
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out, tx_status 00 status e000.
diagnostics: net 0cc0 media 8080 dma 000000a0 fifo 8800
Flags; bus-master 1, dirty 18790(6) current 18806(6)
Transmit list 37e3c5c0 vs. f7e3c5c0.
0: @f7e3c200 length 8000002a status 0000002a
1: @f7e3c2a0 length 8000002a status 0000002a
2: @f7e3c340 length 8000002a status 0000002a
3: @f7e3c3e0 length 8000002a status 0000002a
4: @f7e3c480 length 8000002a status 8000002a
5: @f7e3c520 length 8000002a status 8000002a
6: @f7e3c5c0 length 8000005f status 0000005f
7: @f7e3c660 length 8000005f status 0000005f
8: @f7e3c700 length 8000002a status 0000002a
9: @f7e3c7a0 length 8000002a status 0000002a
10: @f7e3c840 length 8000002a status 0000002a
11: @f7e3c8e0 length 8000002a status 0000002a
12: @f7e3c980 length 8000002a status 0000002a
13: @f7e3ca20 length 8000002a status 0000002a
14: @f7e3cac0 length 8000002a status 0000002a
15: @f7e3cb60 length 8000002a status 0000002a
eth0: Resetting the Tx ring pointer.
lspci -vvv:
01:0b.0 RAID bus controller: Silicon Image, Inc. SiI 3112
[SATALink/SATARaid] Serial ATA Controller (rev 01)
Subsystem: Silicon Image, Inc. SiI 3112 SATARaid Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size 08
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 9c00 [size=8]
Region 1: I/O ports at a000 [size=4]
Region 2: I/O ports at a400 [size=8]
Region 3: I/O ports at a800 [size=4]
Region 4: I/O ports at ac00 [size=16]
Region 5: Memory at e5006000 (32-bit, non-prefetchable)
[size=512]
[virtual] Expansion ROM at e6800000 [disabled] [size=512K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
--
avuton
--
Anyone who quotes me in their sig is an idiot. -- Rusty Russell.
next prev parent reply other threads:[~2006-05-16 3:36 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-15 17:00 Jeff Garzik
2006-05-15 17:18 ` Andrew Morton
2006-05-15 18:06 ` Jeff Garzik
2006-05-15 19:06 ` Arkadiusz Miskiewicz
2006-05-15 20:45 ` Jeff Garzik
2006-05-15 19:33 ` Mark Lord
2006-05-15 22:52 ` Tejun Heo
2006-05-15 18:15 ` Jeff Garzik
2006-05-15 18:27 ` Andrew Morton
2006-05-15 18:44 ` Jeff Garzik
2006-05-15 18:37 ` Alan Cox
2006-05-15 17:19 ` Alan Cox
2006-05-15 17:13 ` Jeff Garzik
2006-05-15 18:29 ` Tomasz Torcz
2006-05-15 18:43 ` Jeff Garzik
2006-05-15 23:32 ` Tejun Heo
2006-05-15 23:49 ` Jeff Garzik
2006-05-16 0:04 ` Tejun Heo
2006-05-16 2:15 ` Tejun Heo
2006-05-15 19:15 ` Jeff Garzik
2006-05-15 23:02 ` Wakko Warner
2006-05-15 23:00 ` Jeff Garzik
2006-05-15 23:13 ` Wakko Warner
2006-05-15 23:19 ` Jeff Garzik
2006-05-15 23:40 ` Alan Cox
2006-05-15 23:50 ` Wakko Warner
2006-05-15 23:38 ` Alan Cox
2006-05-15 23:47 ` Wakko Warner
2006-05-15 23:45 ` Jeff Garzik
2006-05-15 23:30 ` Avuton Olrich
2006-05-15 23:36 ` Tejun Heo
2006-05-15 23:54 ` Jeff Garzik
2006-05-16 0:08 ` Avuton Olrich
2006-05-16 3:36 ` Avuton Olrich [this message]
2006-05-16 3:51 ` Jeff Garzik
2006-05-16 4:33 ` Avuton Olrich
2006-05-16 14:57 ` Linus Torvalds
2006-05-17 15:25 ` OGAWA Hirofumi
2006-05-17 23:40 ` Linus Torvalds
2006-05-17 23:48 ` Jeff Garzik
2006-05-18 1:48 ` Alan Cox
2006-05-17 23:49 ` Linus Torvalds
2006-05-16 15:02 ` Jeff Garzik
2006-05-16 3:55 ` Tejun Heo
2006-05-16 4:37 ` Avuton Olrich
2006-05-17 2:05 ` Andrew Morton
2006-05-17 4:49 ` Tejun Heo
2006-05-17 4:56 ` Andrew Morton
2006-05-17 5:14 ` Tejun Heo
2006-05-17 6:35 ` Tejun Heo
2006-05-18 11:24 ` Albert Lee
2006-05-18 11:33 ` Tejun Heo
2006-05-19 10:37 ` Albert Lee
2006-05-19 11:03 ` Tejun Heo
2006-05-18 23:07 ` Andrew Morton
2006-05-19 1:14 ` Tejun Heo
2006-05-19 2:06 ` Jeff Garzik
2006-05-19 2:16 ` Tejun Heo
2006-05-22 7:22 ` Jeff Garzik
[not found] <6cOK9-5WZ-21@gated-at.bofh.it>
[not found] ` <6cUPu-6Dh-5@gated-at.bofh.it>
[not found] ` <6cV8V-71t-3@gated-at.bofh.it>
[not found] ` <6cYzI-3yr-3@gated-at.bofh.it>
[not found] ` <6cYT8-3Vy-7@gated-at.bofh.it>
[not found] ` <6cZvL-4Vb-1@gated-at.bofh.it>
2006-05-16 5:33 ` Robert Hancock
2006-05-17 7:35 Matthieu CASTET
2006-05-18 0:36 Brown, Len
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3aa654a40605152036h40fa1cd0x8edd81431c1bd22d@mail.gmail.com \
--to=avuton@gmail.com \
--cc=akpm@osdl.org \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®