Hi Marcelo,

On Sun, 2026-09-20 at 10:52 -0300, Marcelo Schmitt wrote:
> Hello Kanak,
> 
> On 09/17, Kanak Shilledar wrote:
> > ICM42370P is a 3-axis accelerometer. The device can support I2C,
> > SPI
> > and I3C. Add the supporting devicetree documentation for the
> > device.
> > The device supports VDD and VDDIO operating range of 1.71V to 3.6V.
> > 
> Patch 3 says ICM-42370-P is almost identical to the existing
> Invensense ICM-42607-P.
> Instead of creating a new doc, could we have similar properties for
> ICM-42370-P
> by extending
> Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml?
> The updates on the other patches keep supporting both ICM-42370-P and
> ICM-42370-P with the same device driver.

ICM-42370-P is very similar to ICM-42607-P but it's an accelerometer as
it does not have gyro. As dt-bindings should describe the hardware I
think it should be inside the iio/accel/ directory although it is using
the same driver of IMU. If you think it should be in the same file, I
will move it and update the binding description.

Thanks and Regards,
Kanak Shilledar