Re: [PATCH 2/2] ACPI: PCC: fix Tx done interface in handler

["lihuisong (C)" <lihuisong@huawei.com>]

在 2022/9/21 23:43, Sudeep Holla 写道:
> On Tue, Sep 20, 2022 at 05:45:00PM +0800, Huisong Li wrote:
>> A error, "Client can't run the TX ticker", is printed even if PCC command
>> executed successfully. This root cause is that PCC handler calls
>> 'mbox_client_txdone()' which depands on the client can received 'ACK'
>> packet. But PCC handler detects whether the command is complete through
>> the Tx ACK interrupt. So this patch fix it.
>>
> Thanks for fixing this. Someone mentioned about the error and it was in
> my TODO list.
Great minds think alike😁
>
> I would prefer to reword the subject and commit message as below:
> "
> ACPI: PCC: Fix Tx acknowledge in the PCC address space handler
>
> Currently, mbox_client_txdone() is called from the PCC address space
> handler and that expects the user the Tx state machine to be controlled
> by the client which is not the case and the below warning is thrown:
>
>    | PCCT: Client can't run the TX ticker
>
> Let the controller run the state machine and the end of Tx can be
> acknowledge by calling mbox_chan_txdone() instead.
> "
Thank you for your suggestion. I will fix it in V2.
> With that:
>
> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
>