From: "Kevin Radloff" <radsaq@gmail.com>
To: "Alan Cox" <alan@lxorguk.ukuu.org.uk>
Cc: linux-kernel@vger.kernel.org
Subject: Re: libata PATA patch update
Date: Mon, 8 May 2006 13:29:59 -0400 [thread overview]
Message-ID: <3b0ffc1f0605081029o604e5a3eu62f58b765a10bf65@mail.gmail.com> (raw)
In-Reply-To: <1147104400.3172.7.camel@localhost.localdomain>
On 5/8/06, Alan Cox <alan@lxorguk.ukuu.org.uk> wrote:
> I've posted a new patch versus 2.6.17-rc3 up at the usual location.
Thanks for the update. I'm still getting the same oops when inserting
a CF card, though:
pccard: PCMCIA card inserted into slot 1
cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xdc000-0xfffff
cs: memory probe 0x50000000-0x53ffffff: excluding 0x50000000-0x53ffffff
cs: memory probe 0x60000000-0x60ffffff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
cs: memory probe 0xd0200000-0xd02fffff: excluding 0xd0200000-0xd021ffff
pcmcia: registering new device pcmcia1.0
ata3: PATA max PIO0 cmd 0x3100 ctl 0x310E bmdma 0x0 irq 0
setup_irq: irq handler mismatch
<b012a6ae> setup_irq+0xfb/0x10e <b02414f6> ata_interrupt+0x0/0x13e
<b012a72d> request_irq+0x6c/0x88 <b0240ce8> ata_device_add+0x2b8/0x559
<f01a9b8c> pcmcia_request_io+0xa3/0xc0 [pcmcia] <f02314d4>
pcmcia_init_one+0x482/0x4e2 [pata_pcmcia]
<f01a917e> pcmcia_device_probe+0x7b/0x109 [pcmcia] <b023350e>
__driver_attach+0x0/0x59
<b0233471> driver_probe_device+0x42/0x8b <b0233544> __driver_attach+0x36/0x59
<b0232f9c> bus_for_each_dev+0x33/0x55 <b02333db> driver_attach+0x11/0x13
<b023350e> __driver_attach+0x0/0x59 <b0232cc6> bus_add_driver+0x64/0xfa
<f01a8d1f> pcmcia_register_driver+0x4a/0xab [pcmcia] <b0128815>
sys_init_module+0x1221/0x13ae
<b0102aeb> syscall_call+0x7/0xb
BUG: unable to handle kernel NULL pointer dereference at virtual
address 00000000
printing eip:
b0233b54
*pde = 00000000
Oops: 0000 [#1]
PREEMPT
Modules linked in: pata_pcmcia ipt_LOG xt_limit xt_state
iptable_filter ip_conntrack i915 drm fuj02b1_acpi joydev snd_intel8x0
snd_intel8x0m snd_ac97_codec snd_ac97_bus pcmcia firmware_class sg
snd_pcm_oss snd_mixer_oss uhci_hcd ehci_hcd snd_pcm snd_timer ohci1394
ieee1394 sr_mod psmouse yenta_socket rsrc_nonstatic pcmcia_core
usbcore 8139too mii crc32 snd soundcore snd_page_alloc evdev cdrom
CPU: 0
EIP: 0060:[<b0233b54>] Not tainted VLI
EFLAGS: 00010206 (2.6.17-rc3-ck3-ide1-fu-mw #1)
EIP is at make_class_name+0x29/0x88
eax: 00000000 ebx: ffffffff ecx: ffffffff edx: 00000009
esi: b02efb2c edi: 00000000 ebp: 00000000 esp: b18c3b98
ds: 007b es: 007b ss: 0068
Process modprobe (pid: 2412, threadinfo=b18c3000 task=eea3b070)
Stack: <0>ef3fa9f8 ef3fa9f8 b02efb2c b02efb34 b02efac0 b0233d2d
00000000 00000000
ef3fa9f8 00000246 ef3fa800 ef3fa828 b0233dc8 ef3fa8d0 b02376b4 ef3faa90
ee432140 00003100 0000310e b023e697 00000000 b0240f12 b18c3c4c ee432140
Call Trace:
<b0233d2d> class_device_del+0x6f/0x102 <b0233dc8>
class_device_unregister+0x8/0x10
<b02376b4> scsi_remove_host+0xe5/0xf0 <b023e697> ata_host_remove+0xe/0x18
<b0240f12> ata_device_add+0x4e2/0x559 <f01a9b8c>
pcmcia_request_io+0xa3/0xc0 [pcmcia]
<f02314d4> pcmcia_init_one+0x482/0x4e2 [pata_pcmcia] <f01a917e>
pcmcia_device_probe+0x7b/0x109 [pcmcia]
<b023350e> __driver_attach+0x0/0x59 <b0233471> driver_probe_device+0x42/0x8b
<b0233544> __driver_attach+0x36/0x59 <b0232f9c> bus_for_each_dev+0x33/0x55
<b02333db> driver_attach+0x11/0x13 <b023350e> __driver_attach+0x0/0x59
<b0232cc6> bus_add_driver+0x64/0xfa <f01a8d1f>
pcmcia_register_driver+0x4a/0xab [pcmcia]
<b0128815> sys_init_module+0x1221/0x13ae <b0102aeb> syscall_call+0x7/0xb
Code: d0 c3 55 31 ed 57 56 53 83 cb ff 83 ec 04 89 d9 89 04 24 8b 40
44 8b 38 89 e8 f2 ae f7 d1 49 8b 04 24 89 ca 89 d9 8b 78 08 89 e8 <f2>
ae f7 d1 49 8d 44 0a 02 ba d0 00 00 00 e8 b9 d9 f0 ff ba f4
EIP: [<b0233b54>] make_class_name+0x29/0x88 SS:ESP 0068:b18c3b98
--
Kevin 'radsaq' Radloff
radsaq@gmail.com
http://thesaq.com/
next prev parent reply other threads:[~2006-05-08 17:30 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-08 16:06 Alan Cox
2006-05-08 16:54 ` Meelis Roos
2006-05-08 17:29 ` Kevin Radloff [this message]
2006-05-09 12:24 ` Alan Cox
2006-05-09 16:52 ` Kevin Radloff
2006-05-08 21:57 ` Matthieu CASTET
[not found] ` <1147178241.3172.74.camel@localhost.localdomain>
[not found] ` <4460D7D7.3070807@free.fr>
2006-05-10 21:24 ` matthieu castet
2006-05-08 23:48 ` Rene Herman
2006-05-09 12:30 ` Alan Cox
2006-05-09 20:05 ` Rene Herman
2006-05-23 23:26 ` Rene Herman
2006-05-24 0:11 ` Rene Herman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3b0ffc1f0605081029o604e5a3eu62f58b765a10bf65@mail.gmail.com \
--to=radsaq@gmail.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®