From: "Kevin Radloff" <radsaq@gmail.com>
To: "Alan Cox" <alan@lxorguk.ukuu.org.uk>
Cc: Linux-Kernel@vger.kernel.org
Subject: Re: PATA driver patch for 2.6.17
Date: Sun, 25 Jun 2006 11:23:02 -0400 [thread overview]
Message-ID: <3b0ffc1f0606250823h49ec5c9cy180d4941d6c9c8b@mail.gmail.com> (raw)
In-Reply-To: <1150740947.2871.42.camel@localhost.localdomain>
On 6/19/06, Alan Cox <alan@lxorguk.ukuu.org.uk> wrote:
> http://zeniv.linux.org.uk/~alan/IDE
>
> This is basically a resync versus 2.6.17, the head of the PATA tree is
> now built against Jeffs tree with revised error handling and the like.
>
> Alan
Hrm, I finally tried a different CF card (Viking 256MB) from the one I
usually use in my camera, and it failed to work:
pccard: PCMCIA card inserted into slot 1
pcmcia: registering new device pcmcia1.0
ata6: PATA max PIO0 cmd 0x3100 ctl 0x310E bmdma 0x0 irq 3
ata6: dev 0 cfg 49:0200 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0000
ata6: dev 0 ATA-0, max PIO0, 500736 sectors: LBA
ata6: failed to set xfermode (err_mask=0x1)
scsi6 : pata_pcmcia
Here's me sticking in my Sandisk Ultra II 1GB CF card and it working
immediately after:
pccard: card ejected from slot 1
pccard: PCMCIA card inserted into slot 1
pcmcia: registering new device pcmcia1.0
ata7: PATA max PIO0 cmd 0x3100 ctl 0x310E bmdma 0x0 irq 3
ata7: dev 0 cfg 49:0200 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0000
ata7: dev 0 ATA-10, max PIO4, 2001888 sectors: LBA
ata7: dev 0 configured for PIO0
scsi7 : pata_pcmcia
Vendor: ATA Model: SanDisk SDCFH-10 Rev: HDX
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write through
SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write through
sdb: sdb1
sd 7:0:0:0: Attached scsi removable disk sdb
sd 7:0:0:0: Attached scsi generic sg2 type 0
--
Kevin 'radsaq' Radloff
radsaq@gmail.com
http://thesaq.com/
next prev parent reply other threads:[~2006-06-25 15:23 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-19 18:15 Alan Cox
2006-06-19 19:46 ` Marcus Furlong
2006-06-19 21:07 ` Alan Cox
2006-06-19 21:40 ` Marcus Furlong
2006-06-20 5:41 ` Fabio Comolli
2006-06-20 6:53 ` Alan Cox
2006-06-20 17:12 ` Andrey Borzenkov
2006-06-21 21:23 ` Alan Cox
2006-06-22 16:50 ` Andrey Borzenkov
2006-06-23 15:24 ` Alan Cox
2006-06-23 17:20 ` Andrey Borzenkov
2006-06-25 10:58 ` Andrey Borzenkov
2006-06-25 15:23 ` Kevin Radloff [this message]
2006-06-28 15:25 ` Kevin Radloff
2006-06-28 15:48 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3b0ffc1f0606250823h49ec5c9cy180d4941d6c9c8b@mail.gmail.com \
--to=radsaq@gmail.com \
--cc=Linux-Kernel@vger.kernel.org \
--cc=alan@lxorguk.ukuu.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®