mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Robin Murphy <robin.murphy@arm.com>
To: Marek Szyprowski <m.szyprowski@samsung.com>,
	iommu@lists.linux-foundation.org, linux-kernel@vger.kernel.org
Cc: Joerg Roedel <joro@8bytes.org>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Subject: Re: [PATCH v2] iommu: iova: Consolidate code for adding new node to iovad domain rbtree
Date: Fri, 24 Feb 2017 12:15:28 +0000	[thread overview]
Message-ID: <3b217301-59d7-0822-8879-dd197a82fcc7@arm.com> (raw)
In-Reply-To: <1487934817-11725-1-git-send-email-m.szyprowski@samsung.com>

On 24/02/17 11:13, Marek Szyprowski wrote:
> This patch consolidates almost the same code used in iova_insert_rbtree()
> and __alloc_and_insert_iova_range() functions. While touching this code,
> replace BUG() with WARN_ON(1) to avoid taking down the whole system in
> case of corrupted iova tree or incorrect calls.

Thanks Marek!

Tested-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>

> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> ---
> v2:
> - replaced BUG() with WARN_ON(1) as suggested by Robin Murphy
> 
> v1:
> - initial version
> ---
>  drivers/iommu/iova.c | 87 ++++++++++++++++++++--------------------------------
>  1 file changed, 33 insertions(+), 54 deletions(-)
> 
> diff --git a/drivers/iommu/iova.c b/drivers/iommu/iova.c
> index b7268a14184f..e80a4105ac2a 100644
> --- a/drivers/iommu/iova.c
> +++ b/drivers/iommu/iova.c
> @@ -100,6 +100,34 @@ static unsigned long iova_rcache_get(struct iova_domain *iovad,
>  	}
>  }
>  
> +/* Insert the iova into domain rbtree by holding writer lock */
> +static void
> +iova_insert_rbtree(struct rb_root *root, struct iova *iova,
> +		   struct rb_node *start)
> +{
> +	struct rb_node **new, *parent = NULL;
> +
> +	new = (start) ? &start : &(root->rb_node);
> +	/* Figure out where to put new node */
> +	while (*new) {
> +		struct iova *this = rb_entry(*new, struct iova, node);
> +
> +		parent = *new;
> +
> +		if (iova->pfn_lo < this->pfn_lo)
> +			new = &((*new)->rb_left);
> +		else if (iova->pfn_lo > this->pfn_lo)
> +			new = &((*new)->rb_right);
> +		else {
> +			WARN_ON(1); /* this should not happen */
> +			return;
> +		}
> +	}
> +	/* Add new node and rebalance tree. */
> +	rb_link_node(&iova->node, parent, new);
> +	rb_insert_color(&iova->node, root);
> +}
> +
>  /*
>   * Computes the padding size required, to make the start address
>   * naturally aligned on the power-of-two order of its size
> @@ -157,35 +185,8 @@ static int __alloc_and_insert_iova_range(struct iova_domain *iovad,
>  	new->pfn_lo = limit_pfn - (size + pad_size) + 1;
>  	new->pfn_hi = new->pfn_lo + size - 1;
>  
> -	/* Insert the new_iova into domain rbtree by holding writer lock */
> -	/* Add new node and rebalance tree. */
> -	{
> -		struct rb_node **entry, *parent = NULL;
> -
> -		/* If we have 'prev', it's a valid place to start the
> -		   insertion. Otherwise, start from the root. */
> -		if (prev)
> -			entry = &prev;
> -		else
> -			entry = &iovad->rbroot.rb_node;
> -
> -		/* Figure out where to put new node */
> -		while (*entry) {
> -			struct iova *this = rb_entry(*entry, struct iova, node);
> -			parent = *entry;
> -
> -			if (new->pfn_lo < this->pfn_lo)
> -				entry = &((*entry)->rb_left);
> -			else if (new->pfn_lo > this->pfn_lo)
> -				entry = &((*entry)->rb_right);
> -			else
> -				BUG(); /* this should not happen */
> -		}
> -
> -		/* Add new node and rebalance tree. */
> -		rb_link_node(&new->node, parent, entry);
> -		rb_insert_color(&new->node, &iovad->rbroot);
> -	}
> +	/* If we have 'prev', it's a valid place to start the insertion. */
> +	iova_insert_rbtree(&iovad->rbroot, new, prev);
>  	__cached_rbnode_insert_update(iovad, saved_pfn, new);
>  
>  	spin_unlock_irqrestore(&iovad->iova_rbtree_lock, flags);
> @@ -194,28 +195,6 @@ static int __alloc_and_insert_iova_range(struct iova_domain *iovad,
>  	return 0;
>  }
>  
> -static void
> -iova_insert_rbtree(struct rb_root *root, struct iova *iova)
> -{
> -	struct rb_node **new = &(root->rb_node), *parent = NULL;
> -	/* Figure out where to put new node */
> -	while (*new) {
> -		struct iova *this = rb_entry(*new, struct iova, node);
> -
> -		parent = *new;
> -
> -		if (iova->pfn_lo < this->pfn_lo)
> -			new = &((*new)->rb_left);
> -		else if (iova->pfn_lo > this->pfn_lo)
> -			new = &((*new)->rb_right);
> -		else
> -			BUG(); /* this should not happen */
> -	}
> -	/* Add new node and rebalance tree. */
> -	rb_link_node(&iova->node, parent, new);
> -	rb_insert_color(&iova->node, root);
> -}
> -
>  static struct kmem_cache *iova_cache;
>  static unsigned int iova_cache_users;
>  static DEFINE_MUTEX(iova_cache_mutex);
> @@ -505,7 +484,7 @@ void put_iova_domain(struct iova_domain *iovad)
>  
>  	iova = alloc_and_init_iova(pfn_lo, pfn_hi);
>  	if (iova)
> -		iova_insert_rbtree(&iovad->rbroot, iova);
> +		iova_insert_rbtree(&iovad->rbroot, iova, NULL);
>  
>  	return iova;
>  }
> @@ -612,11 +591,11 @@ struct iova *
>  	rb_erase(&iova->node, &iovad->rbroot);
>  
>  	if (prev) {
> -		iova_insert_rbtree(&iovad->rbroot, prev);
> +		iova_insert_rbtree(&iovad->rbroot, prev, NULL);
>  		iova->pfn_lo = pfn_lo;
>  	}
>  	if (next) {
> -		iova_insert_rbtree(&iovad->rbroot, next);
> +		iova_insert_rbtree(&iovad->rbroot, next, NULL);
>  		iova->pfn_hi = pfn_hi;
>  	}
>  	spin_unlock_irqrestore(&iovad->iova_rbtree_lock, flags);
> 

  reply	other threads:[~2017-02-24 12:15 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20170224111346eucas1p2039e4d85e34f2a4cdd3adc298e2a1b6f@eucas1p2.samsung.com>
2017-02-24 11:13 ` Marek Szyprowski
2017-02-24 12:15   ` Robin Murphy [this message]
2017-03-21 13:59   ` Joerg Roedel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3b217301-59d7-0822-8879-dd197a82fcc7@arm.com \
    --to=robin.murphy@arm.com \
    --cc=b.zolnierkie@samsung.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=joro@8bytes.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®