Re: [PATCH v5 1/3] dt-bindings: phy: Add starfive,jh7110-dphy-rx

[Changhuang Liang <changhuang.liang@starfivetech.com>]

On 2023/5/29 22:05, Conor Dooley wrote:
> Hey Changhuang,
> 
> Couple of minor bits from me here, you don't need to fix them unless
> the binding has to change for other reasons.
> 

Thanks for your comments.

[...]
>> +$id: http://devicetree.org/schemas/phy/starfive,jh7110-dphy-rx.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: StarFive SoC MIPI D-PHY Rx Controller
> 
> nit: either s/SoC/JH7110/ or s/SoC//.
> 

Changed to "StarFive JH7110 SoC MIPI D-PHY Rx Controller"?

>> +
>> +maintainers:
>> +  - Jack Zhu <jack.zhu@starfivetech.com>
>> +  - Changhuang Liang <changhuang.liang@starfivetech.com>
>> +
>> +description:
>> +  The StarFive SoC uses the MIPI CSI D-PHY based on M31 IP to transfer
>> +  CSI camera data.
> 
> nit: "Starfive SoCs contain a MIPI CSI D-PHY based on an M31 IP, used to
> transfer CSI camera data."
> 

Will fixed this.

>> +properties:
>> +  compatible:
>> +    const: starfive,jh7110-dphy-rx
[...]
>> +  resets:
>> +    items:
>> +      - description: DPHY_HW reset
>> +      - description: DPHY_B09_ALWAYS_ON reset
> 
> I'd prefer not to have what looks like copy-paste from a datasheet
> and instead a description of what they do.
> 
> Otherwise, this looks grand to me, but I don't understand the hardware
> so there is no point in me leaving an R-b on this.
> Hopefully Krzysztof can take a look at it in the coming days.
> 
I will wait for Krzysztof's comments.