From: tze.yee.ng@altera.com
To: Moritz Fischer <mdf@kernel.org>, Xu Yilun <yilun.xu@intel.com>,
Tom Rix <trix@redhat.com>,
linux-fpga@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2] fpga: altera-cvp: Handle truncated bitstream with padding buffer
Date: Wed, 18 Nov 2026 15:43:15 +0800 [thread overview]
Message-ID: <3c1bb384cb9cd5bb35b3c7e68a4feab95ef4ad60.1794987679.git.tze.yee.ng@altera.com> (raw)
From: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
The AIB CvP firmware requires a minimum transfer size of 4096 bytes.
When a bitstream smaller than this is sent, the firmware DMA engine
stalls waiting for the remaining data, causing a hang.
Allocate a 4096-byte send_buf at probe time and copy host data into
it before each block transfer, ensuring the full block size is always
sent regardless of the actual data length. Also improve error
detection in write_complete() by checking VSE_CVP_STATUS_CFG_ERR
instead of VSE_UNCOR_ERR_CVP_CFG_ERR to catch truncated or
mismatched bitstream errors.
Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
Signed-off-by: Tze Yee Ng <tze.yee.ng@altera.com>
---
Note: I am taking over this patch from Nazim Amirul, who is no longer
working on it. Nazim is kept as the author.
Changes in v2:
- Rebase from linux-fpga/for-next without code changes.
v1: https://lore.kernel.org/all/20260619040811.20038-1-muhammad.nazim.amirul.nazle.asmade@altera.com/
---
drivers/fpga/altera-cvp.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/fpga/altera-cvp.c b/drivers/fpga/altera-cvp.c
index 103446465e0c..c9357cbe7fc0 100644
--- a/drivers/fpga/altera-cvp.c
+++ b/drivers/fpga/altera-cvp.c
@@ -82,6 +82,7 @@ struct altera_cvp_conf {
u8 numclks;
u32 sent_packets;
u32 vsec_offset;
+ u8 *send_buf;
const struct cvp_priv *priv;
};
@@ -518,7 +519,9 @@ static int altera_cvp_write(struct fpga_manager *mgr, const char *buf,
}
len = min(conf->priv->block_size, remaining);
- altera_cvp_send_block(conf, data, len);
+ memcpy(conf->send_buf, data, len);
+ altera_cvp_send_block(conf, (const u32 *)conf->send_buf,
+ conf->priv->block_size);
data += len / sizeof(u32);
done += len;
remaining -= len;
@@ -557,10 +560,10 @@ static int altera_cvp_write_complete(struct fpga_manager *mgr,
if (ret)
return ret;
- /* STEP 16 - check CVP_CONFIG_ERROR_LATCHED bit */
- altera_read_config_dword(conf, VSE_UNCOR_ERR_STATUS, &val);
- if (val & VSE_UNCOR_ERR_CVP_CFG_ERR) {
- dev_err(&mgr->dev, "detected CVP_CONFIG_ERROR_LATCHED!\n");
+ /* STEP 16 - check CVP_CONFIG_ERROR bit */
+ ret = altera_read_config_dword(conf, VSE_CVP_STATUS, &val);
+ if (ret || (val & VSE_CVP_STATUS_CFG_ERR)) {
+ dev_err(&mgr->dev, "CVP_CONFIG_ERROR!\n");
return -EPROTO;
}
@@ -729,6 +732,11 @@ static int altera_cvp_probe(struct pci_dev *pdev,
pci_set_drvdata(pdev, mgr);
+ conf->send_buf = devm_kzalloc(&pdev->dev, conf->priv->block_size, GFP_KERNEL);
+ if (!conf->send_buf) {
+ ret = -ENOMEM;
+ goto err_unmap;
+ }
return 0;
err_unmap:
--
2.43.7
reply other threads:[~2026-11-18 7:43 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3c1bb384cb9cd5bb35b3c7e68a4feab95ef4ad60.1794987679.git.tze.yee.ng@altera.com \
--to=tze.yee.ng@altera.com \
--cc=linux-fpga@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mdf@kernel.org \
--cc=trix@redhat.com \
--cc=yilun.xu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®