From: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 1/3] arm64: dts: qcom: sm8750: Add Iris VPU v3.5
Date: Thu, 8 Jan 2026 13:24:55 +0530 [thread overview]
Message-ID: <3c1ed641-b259-a7fc-04c6-25903df21889@oss.qualcomm.com> (raw)
In-Reply-To: <20260106-b4-sm8750-iris-dts-v4-1-97db1d1df3dd@oss.qualcomm.com>
On 1/6/2026 2:37 PM, Krzysztof Kozlowski wrote:
> Add Iris video codec to SM8750 SoC, which comes with significantly
> different powering up sequence than previous SM8650, thus different
> clocks and resets. For consistency keep existing clock and clock-names
> naming, so the list shares common part.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
> ---
> arch/arm64/boot/dts/qcom/sm8750.dtsi | 121 +++++++++++++++++++++++++++++++++++
> 1 file changed, 121 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi
> index 0a6f2a449c20..a76bf5193a70 100644
> --- a/arch/arm64/boot/dts/qcom/sm8750.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi
> @@ -6,6 +6,7 @@
> #include <dt-bindings/clock/qcom,rpmh.h>
> #include <dt-bindings/clock/qcom,sm8750-gcc.h>
> #include <dt-bindings/clock/qcom,sm8750-tcsr.h>
> +#include <dt-bindings/clock/qcom,sm8750-videocc.h>
> #include <dt-bindings/dma/qcom-gpi.h>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interconnect/qcom,icc.h>
> @@ -2811,6 +2812,126 @@ usb_dwc3_ss: endpoint {
> };
> };
>
> + iris: video-codec@aa00000 {
> + compatible = "qcom,sm8750-iris";
> + reg = <0x0 0x0aa00000 0x0 0xf0000>;
> +
> + clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
> + <&videocc VIDEO_CC_MVS0C_CLK>,
> + <&videocc VIDEO_CC_MVS0_CLK>,
> + <&gcc GCC_VIDEO_AXI1_CLK>,
> + <&videocc VIDEO_CC_MVS0C_FREERUN_CLK>,
> + <&videocc VIDEO_CC_MVS0_FREERUN_CLK>;
> + clock-names = "iface",
> + "core",
> + "vcodec0_core",
> + "iface1",
> + "core_freerun",
> + "vcodec0_core_freerun";
> +
> + dma-coherent;
> + iommus = <&apps_smmu 0x1940 0>,
> + <&apps_smmu 0x1947 0>;
> +
> + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
> + &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
> + <&mmss_noc MASTER_VIDEO_MVP QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> + interconnect-names = "cpu-cfg",
> + "video-mem";
> +
> + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
> +
> + memory-region = <&video_mem>;
> +
> + operating-points-v2 = <&iris_opp_table>;
> +
> + power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
> + <&videocc VIDEO_CC_MVS0_GDSC>,
> + <&rpmhpd RPMHPD_MXC>,
> + <&rpmhpd RPMHPD_MMCX>;
> + power-domain-names = "venus",
> + "vcodec0",
> + "mxc",
> + "mmcx";
> +
> + resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>,
> + <&gcc GCC_VIDEO_AXI1_CLK_ARES>,
> + <&videocc VIDEO_CC_MVS0C_FREERUN_CLK_ARES>,
> + <&videocc VIDEO_CC_MVS0_FREERUN_CLK_ARES>;
> + reset-names = "bus0",
> + "bus1",
> + "core",
> + "vcodec0_core";
> +
> + /*
> + * IRIS firmware is signed by vendors, only
> + * enable in boards where the proper signed firmware
> + * is available.
> + */
> + status = "disabled";
> +
> + iris_opp_table: opp-table {
> + compatible = "operating-points-v2";
> +
> + opp-240000000 {
> + opp-hz = /bits/ 64 <240000000>;
> + required-opps = <&rpmhpd_opp_low_svs_d1>,
> + <&rpmhpd_opp_low_svs_d1>;
> + };
> +
> + opp-338000000 {
> + opp-hz = /bits/ 64 <338000000>;
> + required-opps = <&rpmhpd_opp_low_svs>,
> + <&rpmhpd_opp_low_svs>;
> + };
> +
> + opp-420000000 {
> + opp-hz = /bits/ 64 <420000000>;
> + required-opps = <&rpmhpd_opp_svs>,
> + <&rpmhpd_opp_svs>;
> + };
> +
> + opp-444000000 {
> + opp-hz = /bits/ 64 <444000000>;
> + required-opps = <&rpmhpd_opp_svs_l1>,
> + <&rpmhpd_opp_svs_l1>;
> + };
> +
> + opp-533333334 {
> + opp-hz = /bits/ 64 <533333334>;
> + required-opps = <&rpmhpd_opp_nom>,
> + <&rpmhpd_opp_nom>;
> + };
> +
> + opp-570000000 {
> + opp-hz = /bits/ 64 <570000000>;
> + required-opps = <&rpmhpd_opp_nom_l1>,
> + <&rpmhpd_opp_nom_l1>;
> + };
> +
> + opp-630000000 {
> + opp-hz = /bits/ 64 <630000000>;
> + required-opps = <&rpmhpd_opp_turbo>,
> + <&rpmhpd_opp_turbo>;
> + };
> + };
> + };
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Thanks,
Dikshita
next prev parent reply other threads:[~2026-01-08 7:55 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-06 9:07 [PATCH v4 0/3] " Krzysztof Kozlowski
2026-01-06 9:07 ` [PATCH v4 1/3] " Krzysztof Kozlowski
2026-01-06 15:56 ` Bryan O'Donoghue
2026-01-06 17:13 ` Taniya Das
2026-01-08 7:54 ` Dikshita Agarwal [this message]
2026-01-06 9:07 ` [PATCH v4 2/3] arm64: dts: qcom: sm8750-mtp: Enable Iris codec Krzysztof Kozlowski
2026-01-06 15:56 ` Bryan O'Donoghue
2026-01-06 9:07 ` [PATCH v4 3/3] arm64: dts: qcom: sm8750-qrd: " Krzysztof Kozlowski
2026-01-06 15:56 ` Bryan O'Donoghue
2026-01-06 17:52 ` [PATCH v4 0/3] arm64: dts: qcom: sm8750: Add Iris VPU v3.5 Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3c1ed641-b259-a7fc-04c6-25903df21889@oss.qualcomm.com \
--to=dikshita.agarwal@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®