From: James Bottomley <James.Bottomley@HansenPartnership.com>
To: Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-scsi <linux-scsi@vger.kernel.org>,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: [GIT PULL] SCSI fixes for 6.16-rc4
Date: Thu, 03 Jul 2025 14:42:16 -0400 [thread overview]
Message-ID: <3c9c43da7745198e1a8084dc0aabeca317fd9311.camel@HansenPartnership.com> (raw)
driver fixes plus core sd.c fix are all small and obvious. The larger
change to hosts.c is less obvious, but required to avoid data
corruption caused by bio splitting.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes
The short changelog is:
Bart Van Assche (1):
scsi: ufs: core: Fix spelling of a sysfs attribute name
Christoph Hellwig (2):
scsi: core: Enforce unlimited max_segment_size when virt_boundary_mask is set
scsi: RDMA/srp: Don't set a max_segment_size when virt_boundary_mask is set
Thomas Fourier (2):
scsi: qla4xxx: Fix missing DMA mapping error in qla4xxx_alloc_pdu()
scsi: qla2xxx: Fix DMA mapping test in qla24xx_get_port_database()
jackysliu (1):
scsi: sd: Fix VPD page 0xb7 length check
and the diffstat:
Documentation/ABI/testing/sysfs-driver-ufs | 2 +-
drivers/infiniband/ulp/srp/ib_srp.c | 5 +++--
drivers/scsi/hosts.c | 18 +++++++++++-------
drivers/scsi/qla2xxx/qla_mbx.c | 2 +-
drivers/scsi/qla4xxx/ql4_os.c | 2 ++
drivers/scsi/sd.c | 2 +-
drivers/ufs/core/ufs-sysfs.c | 4 ++--
7 files changed, 21 insertions(+), 14 deletions(-)
With full diff below.
James
---
diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs
index d4140dc6c5ba..615453fcc9ff 100644
--- a/Documentation/ABI/testing/sysfs-driver-ufs
+++ b/Documentation/ABI/testing/sysfs-driver-ufs
@@ -711,7 +711,7 @@ Description: This file shows the thin provisioning type. This is one of
The file is read only.
-What: /sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resourse_count
+What: /sys/class/scsi_device/*/device/unit_descriptor/physical_memory_resource_count
Date: February 2018
Contact: Stanislav Nijnikov <stanislav.nijnikov@wdc.com>
Description: This file shows the total physical memory resources. This is
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index 1378651735f6..23ed2fc688f0 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -3705,9 +3705,10 @@ static ssize_t add_target_store(struct device *dev,
target_host->max_id = 1;
target_host->max_lun = -1LL;
target_host->max_cmd_len = sizeof ((struct srp_cmd *) (void *) 0L)->cdb;
- target_host->max_segment_size = ib_dma_max_seg_size(ibdev);
- if (!(ibdev->attrs.kernel_cap_flags & IBK_SG_GAPS_REG))
+ if (ibdev->attrs.kernel_cap_flags & IBK_SG_GAPS_REG)
+ target_host->max_segment_size = ib_dma_max_seg_size(ibdev);
+ else
target_host->virt_boundary_mask = ~srp_dev->mr_page_mask;
target = host_to_target(target_host);
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index e021f1106bea..cc5d05dc395c 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -473,10 +473,17 @@ struct Scsi_Host *scsi_host_alloc(const struct scsi_host_template *sht, int priv
else
shost->max_sectors = SCSI_DEFAULT_MAX_SECTORS;
- if (sht->max_segment_size)
- shost->max_segment_size = sht->max_segment_size;
- else
- shost->max_segment_size = BLK_MAX_SEGMENT_SIZE;
+ shost->virt_boundary_mask = sht->virt_boundary_mask;
+ if (shost->virt_boundary_mask) {
+ WARN_ON_ONCE(sht->max_segment_size &&
+ sht->max_segment_size != UINT_MAX);
+ shost->max_segment_size = UINT_MAX;
+ } else {
+ if (sht->max_segment_size)
+ shost->max_segment_size = sht->max_segment_size;
+ else
+ shost->max_segment_size = BLK_MAX_SEGMENT_SIZE;
+ }
/* 32-byte (dword) is a common minimum for HBAs. */
if (sht->dma_alignment)
@@ -492,9 +499,6 @@ struct Scsi_Host *scsi_host_alloc(const struct scsi_host_template *sht, int priv
else
shost->dma_boundary = 0xffffffff;
- if (sht->virt_boundary_mask)
- shost->virt_boundary_mask = sht->virt_boundary_mask;
-
device_initialize(&shost->shost_gendev);
dev_set_name(&shost->shost_gendev, "host%d", shost->host_no);
shost->shost_gendev.bus = &scsi_bus_type;
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 0cd6f3e14882..13b6cb1b93ac 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -2147,7 +2147,7 @@ qla24xx_get_port_database(scsi_qla_host_t *vha, u16 nport_handle,
pdb_dma = dma_map_single(&vha->hw->pdev->dev, pdb,
sizeof(*pdb), DMA_FROM_DEVICE);
- if (!pdb_dma) {
+ if (dma_mapping_error(&vha->hw->pdev->dev, pdb_dma)) {
ql_log(ql_log_warn, vha, 0x1116, "Failed to map dma buffer.\n");
return QLA_MEMORY_ALLOC_FAILED;
}
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index d4141656b204..a39f1da4ce47 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -3420,6 +3420,8 @@ static int qla4xxx_alloc_pdu(struct iscsi_task *task, uint8_t opcode)
task_data->data_dma = dma_map_single(&ha->pdev->dev, task->data,
task->data_count,
DMA_TO_DEVICE);
+ if (dma_mapping_error(&ha->pdev->dev, task_data->data_dma))
+ return -ENOMEM;
}
DEBUG2(ql4_printk(KERN_INFO, ha, "%s: MaxRecvLen %u, iscsi hrd %d\n",
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 3f6e87705b62..eeaa6af294b8 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -3384,7 +3384,7 @@ static void sd_read_block_limits_ext(struct scsi_disk *sdkp)
rcu_read_lock();
vpd = rcu_dereference(sdkp->device->vpd_pgb7);
- if (vpd && vpd->len >= 2)
+ if (vpd && vpd->len >= 6)
sdkp->rscs = vpd->data[5] & 1;
rcu_read_unlock();
}
diff --git a/drivers/ufs/core/ufs-sysfs.c b/drivers/ufs/core/ufs-sysfs.c
index de8b6acd4058..fcb4b14a710f 100644
--- a/drivers/ufs/core/ufs-sysfs.c
+++ b/drivers/ufs/core/ufs-sysfs.c
@@ -1808,7 +1808,7 @@ UFS_UNIT_DESC_PARAM(logical_block_size, _LOGICAL_BLK_SIZE, 1);
UFS_UNIT_DESC_PARAM(logical_block_count, _LOGICAL_BLK_COUNT, 8);
UFS_UNIT_DESC_PARAM(erase_block_size, _ERASE_BLK_SIZE, 4);
UFS_UNIT_DESC_PARAM(provisioning_type, _PROVISIONING_TYPE, 1);
-UFS_UNIT_DESC_PARAM(physical_memory_resourse_count, _PHY_MEM_RSRC_CNT, 8);
+UFS_UNIT_DESC_PARAM(physical_memory_resource_count, _PHY_MEM_RSRC_CNT, 8);
UFS_UNIT_DESC_PARAM(context_capabilities, _CTX_CAPABILITIES, 2);
UFS_UNIT_DESC_PARAM(large_unit_granularity, _LARGE_UNIT_SIZE_M1, 1);
UFS_UNIT_DESC_PARAM(wb_buf_alloc_units, _WB_BUF_ALLOC_UNITS, 4);
@@ -1825,7 +1825,7 @@ static struct attribute *ufs_sysfs_unit_descriptor[] = {
&dev_attr_logical_block_count.attr,
&dev_attr_erase_block_size.attr,
&dev_attr_provisioning_type.attr,
- &dev_attr_physical_memory_resourse_count.attr,
+ &dev_attr_physical_memory_resource_count.attr,
&dev_attr_context_capabilities.attr,
&dev_attr_large_unit_granularity.attr,
&dev_attr_wb_buf_alloc_units.attr,
next reply other threads:[~2025-07-03 18:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-03 18:42 James Bottomley [this message]
2025-07-03 22:12 ` pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3c9c43da7745198e1a8084dc0aabeca317fd9311.camel@HansenPartnership.com \
--to=james.bottomley@hansenpartnership.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®