Re: [PATCH] arm64: dts: ti: k3-am65-main: Fix DSS irq trigger type

[Aradhya Bhatia <a-bhatia1@ti.com>]

On 06-Nov-23 15:27, Tomi Valkeinen wrote:
> DSS irq trigger type is set to IRQ_TYPE_EDGE_RISING in the DT file, but
> the TRM says it is level triggered.
> 
> For some reason triggering on rising edge results in double the amount
> of expected interrupts, e.g. for normal page flipping test the number of
> interrupts per second is 2 * fps. It is as if the IRQ triggers on both
> edges. There are no other side effects to this issue than slightly
> increased CPU & power consumption due to the extra interrupt.
> 
> Switching to IRQ_TYPE_LEVEL_HIGH is correct and fixes the issue, so
> let's do that.
> 
> Fixes: fc539b90eda2 ("arm64: dts: ti: am654: Add DSS node")
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
> ---

Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>

Regards
Aradhya

>  arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> index bc460033a37a..c98068b6c122 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> @@ -1034,7 +1034,7 @@ dss: dss@4a00000 {
>  		assigned-clocks = <&k3_clks 67 2>;
>  		assigned-clock-parents = <&k3_clks 67 5>;
>  
> -		interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>;
> +		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
>  
>  		dma-coherent;
>  
> 
> ---
> base-commit: ffc253263a1375a65fa6c9f62a893e9767fbebfa
> change-id: 20231106-am65-dss-clk-edge-7d1bdd7c0f58
> 
> Best regards,