From: Hongbo Li <lihongbo22@huawei.com>
To: Chao Yu <chao@kernel.org>, <xiang@kernel.org>
Cc: <linux-erofs@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>,
Yue Hu <zbestahu@gmail.com>,
Jeffle Xu <jefflexu@linux.alibaba.com>,
Sandeep Dhavale <dhavale@google.com>
Subject: Re: [PATCH] erofs: do sanity check on m->type in z_erofs_load_compact_lcluster()
Date: Tue, 8 Jul 2025 10:30:02 +0800 [thread overview]
Message-ID: <3d04116f-5cee-4d41-9150-abbeb18f80be@huawei.com> (raw)
In-Reply-To: <20250707084723.2725437-1-chao@kernel.org>
On 2025/7/7 16:47, Chao Yu wrote:
> All below functions will do sanity check on m->type, let's move sanity
> check to z_erofs_load_compact_lcluster() for cleanup.
> - z_erofs_map_blocks_fo
> - z_erofs_get_extent_compressedlen
> - z_erofs_get_extent_decompressedlen
> - z_erofs_extent_lookback
>
> Signed-off-by: Chao Yu <chao@kernel.org>
> ---
> fs/erofs/zmap.c | 60 ++++++++++++++++++-------------------------------
> 1 file changed, 22 insertions(+), 38 deletions(-)
>
> diff --git a/fs/erofs/zmap.c b/fs/erofs/zmap.c
> index 0bebc6e3a4d7..e530b152e14e 100644
> --- a/fs/erofs/zmap.c
> +++ b/fs/erofs/zmap.c
> @@ -240,6 +240,13 @@ static int z_erofs_load_compact_lcluster(struct z_erofs_maprecorder *m,
> static int z_erofs_load_lcluster_from_disk(struct z_erofs_maprecorder *m,
> unsigned int lcn, bool lookahead)
> {
> + if (m->type >= Z_EROFS_LCLUSTER_TYPE_MAX) {
> + erofs_err(m->inode->i_sb, "unknown type %u @ lcn %u of nid %llu",
> + m->type, lcn, EROFS_I(m->inode)->nid);
> + DBG_BUGON(1);
> + return -EOPNOTSUPP;
> + }
> +
Hi, Chao,
After moving the condition in here, there is no need to check in
z_erofs_extent_lookback, z_erofs_get_extent_compressedlen and
z_erofs_get_extent_decompressedlen. Because in z_erofs_map_blocks_fo,
the condition has been checked in before. Right?
Thanks,
Hongbo
> switch (EROFS_I(m->inode)->datalayout) {
> case EROFS_INODE_COMPRESSED_FULL:
> return z_erofs_load_full_lcluster(m, lcn);
> @@ -265,12 +272,7 @@ static int z_erofs_extent_lookback(struct z_erofs_maprecorder *m,
> if (err)
> return err;
>
> - if (m->type >= Z_EROFS_LCLUSTER_TYPE_MAX) {
> - erofs_err(sb, "unknown type %u @ lcn %lu of nid %llu",
> - m->type, lcn, vi->nid);
> - DBG_BUGON(1);
> - return -EOPNOTSUPP;
> - } else if (m->type == Z_EROFS_LCLUSTER_TYPE_NONHEAD) {
> + if (m->type == Z_EROFS_LCLUSTER_TYPE_NONHEAD) {
> lookback_distance = m->delta[0];
> if (!lookback_distance)
> break;
> @@ -333,17 +335,13 @@ static int z_erofs_get_extent_compressedlen(struct z_erofs_maprecorder *m,
> }
> if (m->compressedblks)
> goto out;
> - } else if (m->type < Z_EROFS_LCLUSTER_TYPE_MAX) {
> - /*
> - * if the 1st NONHEAD lcluster is actually PLAIN or HEAD type
> - * rather than CBLKCNT, it's a 1 block-sized pcluster.
> - */
> - m->compressedblks = 1;
> - goto out;
> }
> - erofs_err(sb, "cannot found CBLKCNT @ lcn %lu of nid %llu", lcn, vi->nid);
> - DBG_BUGON(1);
> - return -EFSCORRUPTED;
> +
> + /*
> + * if the 1st NONHEAD lcluster is actually PLAIN or HEAD type rather
> + * than CBLKCNT, it's a 1 block-sized pcluster.
> + */
> + m->compressedblks = 1;
> out:
> m->map->m_plen = erofs_pos(sb, m->compressedblks);
> return 0;
> @@ -379,11 +377,6 @@ static int z_erofs_get_extent_decompressedlen(struct z_erofs_maprecorder *m)
> if (lcn != headlcn)
> break; /* ends at the next HEAD lcluster */
> m->delta[1] = 1;
> - } else {
> - erofs_err(inode->i_sb, "unknown type %u @ lcn %llu of nid %llu",
> - m->type, lcn, vi->nid);
> - DBG_BUGON(1);
> - return -EOPNOTSUPP;
> }
> lcn += m->delta[1];
> }
> @@ -429,10 +422,7 @@ static int z_erofs_map_blocks_fo(struct inode *inode,
> map->m_flags = EROFS_MAP_MAPPED | EROFS_MAP_ENCODED;
> end = (m.lcn + 1ULL) << lclusterbits;
>
> - switch (m.type) {
> - case Z_EROFS_LCLUSTER_TYPE_PLAIN:
> - case Z_EROFS_LCLUSTER_TYPE_HEAD1:
> - case Z_EROFS_LCLUSTER_TYPE_HEAD2:
> + if (m.type != Z_EROFS_LCLUSTER_TYPE_NONHEAD) {
> if (endoff >= m.clusterofs) {
> m.headtype = m.type;
> map->m_la = (m.lcn << lclusterbits) | m.clusterofs;
> @@ -443,7 +433,7 @@ static int z_erofs_map_blocks_fo(struct inode *inode,
> */
> if (ztailpacking && end > inode->i_size)
> end = inode->i_size;
> - break;
> + goto map_block;
> }
> /* m.lcn should be >= 1 if endoff < m.clusterofs */
> if (!m.lcn) {
> @@ -455,19 +445,13 @@ static int z_erofs_map_blocks_fo(struct inode *inode,
> end = (m.lcn << lclusterbits) | m.clusterofs;
> map->m_flags |= EROFS_MAP_FULL_MAPPED;
> m.delta[0] = 1;
> - fallthrough;
> - case Z_EROFS_LCLUSTER_TYPE_NONHEAD:
> - /* get the corresponding first chunk */
> - err = z_erofs_extent_lookback(&m, m.delta[0]);
> - if (err)
> - goto unmap_out;
> - break;
> - default:
> - erofs_err(sb, "unknown type %u @ offset %llu of nid %llu",
> - m.type, ofs, vi->nid);
> - err = -EOPNOTSUPP;
> - goto unmap_out;
> }
> +
> + /* get the corresponding first chunk */
> + err = z_erofs_extent_lookback(&m, m.delta[0]);
> + if (err)
> + goto unmap_out;
> +map_block:
> if (m.partialref)
> map->m_flags |= EROFS_MAP_PARTIAL_REF;
> map->m_llen = end - map->m_la;
next prev parent reply other threads:[~2025-07-08 2:30 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-07 8:47 Chao Yu
2025-07-08 2:30 ` Hongbo Li [this message]
2025-07-08 2:35 ` Gao Xiang
2025-07-08 2:45 ` Hongbo Li
2025-07-08 7:10 ` Chao Yu
2025-07-08 2:58 ` Gao Xiang
2025-07-08 10:51 ` Chao Yu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3d04116f-5cee-4d41-9150-abbeb18f80be@huawei.com \
--to=lihongbo22@huawei.com \
--cc=chao@kernel.org \
--cc=dhavale@google.com \
--cc=jefflexu@linux.alibaba.com \
--cc=linux-erofs@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=xiang@kernel.org \
--cc=zbestahu@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®