mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Andrew Halaney <ahalaney@redhat.com>, andersson@kernel.org
Cc: agross@kernel.org, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, linux-arm-msm@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	bmasney@redhat.com, quic_shazhuss@quicinc.com
Subject: Re: [PATCH 2/2] arm64: dts: qcom: sa8540p-ride: Document i2c busses
Date: Tue, 24 Jan 2023 22:45:57 +0100	[thread overview]
Message-ID: <3d126383-8fea-7ff5-3f42-c131ce46547f@linaro.org> (raw)
In-Reply-To: <20230124192351.695838-2-ahalaney@redhat.com>



On 24.01.2023 20:23, Andrew Halaney wrote:
> It isn't obvious in the current devicetree what is connected. Go ahead
> and document what's on the other end.
> 
> Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
> ---
Other boards do similar things under the i2c host nodes (see
e.g. sm8450-sony-xperia-nagara.dtsi..

> 
> Not sure if this sort of patch is actually welcomed or not but I went
> through this exercise (for the prior patch) and thought it might be
> useful to document.
..and yes it is very welcome!

> 
> Shazad, this also highlights (unless I misread things) that i2c12 has no
> use for us, right? If agreed I can remove it but sorting through the
> lore links that provided all this it seems like at the time it was
> desired to be added.
It's fine if you guys decide that it's useful for some kind expansion
mezzanine or other add-on board, but if it's not connected anywhere
you may wish to disable the host and remove the pinctrl entries, as
keeping it enabled essentially wastes some power.

Konrad
> 
> Thanks,
> Andrew
> 
>  arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
> index cb9fbdeb5a9e..3478ab91fe73 100644
> --- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts
> @@ -317,6 +317,7 @@ &xo_board_clk {
>  
>  &tlmm {
>  	i2c0_default: i2c0-default-state {
> +		/* To USB7002T-I/KDXVA0 USB hub (SIP1 only) */
>  		pins = "gpio135", "gpio136";
>  		function = "qup0";
>  		drive-strength = <2>;
> @@ -324,6 +325,7 @@ i2c0_default: i2c0-default-state {
>  	};
>  
>  	i2c1_default: i2c1-default-state {
> +		/* To PM40028B-F3EI PCIe switch */
>  		pins = "gpio158", "gpio159";
>  		function = "qup1";
>  		drive-strength = <2>;
> @@ -331,6 +333,7 @@ i2c1_default: i2c1-default-state {
>  	};
>  
>  	i2c12_default: i2c12-default-state {
> +		/* Not connected */
>  		pins = "gpio0", "gpio1";
>  		function = "qup12";
>  		drive-strength = <2>;
> @@ -338,6 +341,7 @@ i2c12_default: i2c12-default-state {
>  	};
>  
>  	i2c15_default: i2c15-default-state {
> +		/* To display connector (SIP1 only) */
>  		pins = "gpio36", "gpio37";
>  		function = "qup15";
>  		drive-strength = <2>;
> @@ -345,6 +349,7 @@ i2c15_default: i2c15-default-state {
>  	};
>  
>  	i2c18_default: i2c18-default-state {
> +		/* To ASM330LHH IMU (SIP1 only) */
>  		pins = "gpio66", "gpio67";
>  		function = "qup18";
>  		drive-strength = <2>;

  reply	other threads:[~2023-01-24 21:46 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-24 19:23 [PATCH 1/2] arm64: dts: qcom: sa8540p-ride: Fix some i2c pinctrl settings Andrew Halaney
2023-01-24 19:23 ` [PATCH 2/2] arm64: dts: qcom: sa8540p-ride: Document i2c busses Andrew Halaney
2023-01-24 21:45   ` Konrad Dybcio [this message]
2023-01-25  6:55   ` Shazad Hussain
2023-01-24 20:31 ` [PATCH 1/2] arm64: dts: qcom: sa8540p-ride: Fix some i2c pinctrl settings Brian Masney
2023-01-24 21:43 ` Konrad Dybcio
2023-01-25  6:56 ` Shazad Hussain

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3d126383-8fea-7ff5-3f42-c131ce46547f@linaro.org \
    --to=konrad.dybcio@linaro.org \
    --cc=agross@kernel.org \
    --cc=ahalaney@redhat.com \
    --cc=andersson@kernel.org \
    --cc=bmasney@redhat.com \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=quic_shazhuss@quicinc.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®