mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Ondřej Jirman" <megous@megous.com>
To: Michal Suchanek <hramrach@gmail.com>
Cc: dev <dev@linux-sunxi.org>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Russell King <linux@armlinux.org.uk>,
	Maxime Ripard <maxime.ripard@free-electrons.com>,
	Chen-Yu Tsai <wens@csie.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
	<devicetree@vger.kernel.org>,
	open list <linux-kernel@vger.kernel.org>
Subject: Re: [linux-sunxi] [PATCH v2 14/14] ARM: dts: sun8i: Enable DVFS on Orange Pi One
Date: Fri, 22 Jul 2016 02:41:59 +0200	[thread overview]
Message-ID: <3d218e35-c848-53b3-e65f-df4b70c1e1f8@megous.com> (raw)
In-Reply-To: <CAOMqctTe==M1SXxbdR8y33yh51fiFGn+oSaKJXhbnpLVTn-New@mail.gmail.com>


[-- Attachment #1.1: Type: text/plain, Size: 1574 bytes --]

Hello Michal,

On 30.6.2016 13:13, Michal Suchanek wrote:
> Hello,
> 
> On 25 June 2016 at 05:45,  <megous@megous.com> wrote:
>> From: Ondrej Jirman <megous@megous.com>
>>
>> Use Xulong Orange Pi One GPIO based regulator for
>> passive cooling and thermal management.
>>
>> Signed-off-by: Ondrej Jirman <megous@megous.com>
>> ---
>>  arch/arm/boot/dts/sun8i-h3-orangepi-one.dts | 39 +++++++++++++++++++++++++++++
>>  1 file changed, 39 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
>> index b1bd6b0..a38d871 100644
>> --- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
>> +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
>> @@ -109,6 +109,45 @@
>>         };
>>  };
>>
>> +&cpu0 {
>> +       operating-points = <
>> +               /* kHz    uV */
>> +               1296000 1300000
>> +               1200000 1300000
> 
> First problem is that the board boots at 1008000 which is not listed
> and the kernel complains.
> 
> Second problem is that the board locks up during boot with this enabled.
> 
> Do you have some suggestion for alternate configuration to test?

I've identified the problem as incorrectly set up gpio-regulator. During
boot, when it was probed, it would be initiualized with 1.1V for a
moment. This caused random non-specific lockups/crashes afterwards.

Fixed patches are in my branch on github, if you want to try again.

  https://github.com/megous/linux/commits/orange-pi-4.7

regards,
  o.

> Thanks
> 
> Michal
> 


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

      parent reply	other threads:[~2016-07-22  0:42 UTC|newest]

Thread overview: 65+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20160625034511.7966-1-megous@megous.com>
2016-06-25  3:44 ` [PATCH v2 01/14] ARM: clk: sunxi: Add driver for the H3 THS clock megous
2016-06-25  7:13   ` Maxime Ripard
2016-06-25 15:23     ` Ondřej Jirman
2016-06-28 11:52       ` Maxime Ripard
2016-06-25  3:44 ` [PATCH v2 02/14] thermal: sun8i_ths: Add support for the thermal sensor on Allwinner H3 megous
2016-06-25  7:10   ` Maxime Ripard
2016-06-25 15:12     ` Ondřej Jirman
2016-06-28 11:39       ` Maxime Ripard
2016-06-25  3:45 ` [PATCH v2 03/14] dt-bindings: document sun8i_ths - H3 thermal sensor driver megous
2016-06-28 20:56   ` Rob Herring
2016-06-25  3:45 ` [PATCH v2 04/14] regulator: SY8106A regulator driver megous
2016-06-26 11:26   ` Mark Brown
2016-06-26 15:07     ` Ondřej Jirman
2016-06-27 14:54       ` Mark Brown
2016-06-28 16:27         ` Ondřej Jirman
2016-06-27 15:10   ` Mark Brown
2016-06-25  3:45 ` [PATCH v2 05/14] dt-bindings: document " megous
2016-06-26 11:27   ` Mark Brown
2016-06-26 15:10     ` Ondřej Jirman
2016-06-26 18:52       ` Mark Brown
2016-06-25  3:45 ` [PATCH v2 06/14] ARM: sun8i: clk: Add clk-factor rate application method megous
2016-06-30 20:40   ` Maxime Ripard
2016-07-01  0:50     ` Ondřej Jirman
2016-07-01  5:37       ` Jean-Francois Moine
2016-07-01  6:34         ` Ondřej Jirman
2016-07-01  7:47           ` Jean-Francois Moine
2016-07-15  8:53       ` Maxime Ripard
2016-07-15 10:38         ` Ondřej Jirman
2016-07-15 13:27           ` Jean-Francois Moine
2016-07-15 13:48             ` Ondřej Jirman
2016-07-15 14:22               ` [linux-sunxi] " Michal Suchanek
2016-07-15 16:33                 ` Ondřej Jirman
2016-07-21  9:51             ` Maxime Ripard
2016-07-21  9:48           ` Maxime Ripard
2016-07-21  9:52             ` Ondřej Jirman
2016-07-26  6:32               ` Maxime Ripard
2016-07-28 11:27                 ` Changed: sunxi-ng clock code - NKMP clock implementation is wrong Ondřej Jirman
2016-07-28 11:38                   ` [linux-sunxi] " Chen-Yu Tsai
2016-07-28 21:00                   ` Maxime Ripard
2016-07-28 22:01                     ` Ondřej Jirman
2016-07-31 10:31                       ` Maxime Ripard
2016-07-31 22:01                         ` Ondřej Jirman
2016-08-31 20:25                           ` Maxime Ripard
2016-07-01  0:53     ` [PATCH v2 06/14] ARM: sun8i: clk: Add clk-factor rate application method Ondřej Jirman
2016-07-15  8:19       ` Maxime Ripard
2016-06-25  3:45 ` [PATCH v2 07/14] ARM: dts: sun8i: Use sun8i-h3-pll1-clk for pll1 in H3 megous
2016-06-25  3:45 ` [PATCH v2 08/14] ARM: dts: sun8i: Add thermal sensor node to the sun8i-h3.dtsi megous
2016-06-25  3:45 ` [PATCH v2 09/14] ARM: dts: sun8i: Add cpu0 label to sun8i-h3.dtsi megous
2016-06-25  3:45 ` [PATCH v2 10/14] ARM: dts: sun8i: Add r_twi I2C controller megous
2016-06-25  7:16   ` Maxime Ripard
2016-06-25  3:45 ` [PATCH v2 11/14] ARM: dts: sun8i: Add sy8106a regulator to Orange Pi PC megous
2016-06-25  3:45 ` [PATCH v2 12/14] ARM: dts: sun8i: Setup CPU operating points for Onrage PI PC megous
2016-06-25  3:45 ` [PATCH v2 13/14] ARM: dts: sun8i: Add gpio-regulator used on Orange Pi One megous
2016-06-25  7:18   ` Maxime Ripard
2016-06-25  3:45 ` [PATCH v2 14/14] ARM: dts: sun8i: Enable DVFS " megous
2016-06-30 11:13   ` [linux-sunxi] " Michal Suchanek
2016-06-30 14:19     ` Ondřej Jirman
2016-06-30 15:16       ` Michal Suchanek
2016-06-30 15:32         ` Ondřej Jirman
2016-06-30 15:50         ` Michal Suchanek
2016-06-30 15:53           ` Ondřej Jirman
2016-07-01 10:54           ` Michal Suchanek
2016-06-30 14:23     ` Siarhei Siamashka
2016-07-01  1:17       ` Ondřej Jirman
2016-07-22  0:41     ` Ondřej Jirman [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3d218e35-c848-53b3-e65f-df4b70c1e1f8@megous.com \
    --to=megous@megous.com \
    --cc=dev@linux-sunxi.org \
    --cc=devicetree@vger.kernel.org \
    --cc=hramrach@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@free-electrons.com \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®