Re: [PATCH v3 0/4] PM / devfreq: Add cpu based scaling support to passive governor

[Johnson Wang <johnson.wang@mediatek.com>]

On Mon, 2022-05-09 at 21:03 +0900, Chanwoo Choi wrote:
> The devfreq passive governor has already supported the devfreq parent
> device
> for coupling the frequency change if some hardware have the
> constraints
> such as power sharing and so on.
> 
> Add cpu based scaling support to passive governor with required-opp
> property.
> It uses the cpufreq notifier to catch the frequency change timing of
> cpufreq
> and get the next frequency according to new cpu frequency by using
> required-opp
> property. It is based on patch[1] and then just code clean-up by
> myself.
> 
> Make the common code for both passive_devfreq and passive_cpufreq
> parent type to remove the duplicate code.
> 
> [1] [RFC,v2] PM / devfreq: Add cpu based scaling support to
> passive_governor
> - https://lore.kernel.org/patchwork/patch/1101049/
> 
> Changes from v2:
> : 
> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-pm/cover/20220507150145.531864-1-cw00.choi@samsung.com/__;!!CTRNKA9wMg0ARbw!x-hPdV1M41ovWuBCw3cVvayFBaqFZRCtLLqDHeX_iNnzvwmOKQYOVQeD9mBfi7n8okEj$
>  
> - Drop the following patch ("PM / devfreq: passive: Update frequency
> when start governor")
> - Move p_data->this initialization into
> cpufreq_passive_regiser_notifier()
> 
> Changes from v1:
> : 
> https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-pm/cover/20210617060546.26933-1-cw00.choi@samsung.com/__;!!CTRNKA9wMg0ARbw!x-hPdV1M41ovWuBCw3cVvayFBaqFZRCtLLqDHeX_iNnzvwmOKQYOVQeD9mBfiw3rUNcX$
>  
> - Rename cpu_data variable to parent_cpu_data to avoid build fail
> - Use for_each_possible_cpu macro when register cpufreq transition
> notifier
> - Add missing exception handling when
> cpufreq_passive_register_notifier is failed
> - Keep cpufreq_policy for posible cpus instead of NR_CPU in order to
> avoid
>   the memory waste when NR_CPU is too high.
> - Add reviewed-by tag of Matthias Kaehlcke for patch1
> 
> 
> Chanwoo Choi (3):
>   PM / devfreq: Export devfreq_get_freq_range symbol within devfreq
>   PM / devfreq: passive: Reduce duplicate code when passive_devfreq
> case
>   PM / devfreq: passive: Keep cpufreq_policy for possible cpus
> 
> Saravana Kannan (1):
>   PM / devfreq: Add cpu based scaling support to passive governor
> 
>  drivers/devfreq/devfreq.c          |  20 +-
>  drivers/devfreq/governor.h         |  27 ++
>  drivers/devfreq/governor_passive.c | 400 ++++++++++++++++++++++++---
> --
>  include/linux/devfreq.h            |  17 +-
>  4 files changed, 387 insertions(+), 77 deletions(-)
> 

For this serie:

Tested-by: Johnson Wang <johnson.wang@mediatek.com>


BRs,
Johnson Wang