From: Stefano Radaelli <stefano.radaelli21@gmail.com>
To: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org
Cc: pierluigi.p@variscite.com,
Stefano Radaelli <stefano.r@variscite.com>,
Frank Li <Frank.Li@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Subject: [PATCH v2 01/15] arm64: dts: freescale: imx8mn-var-som: Move UART4 description to Symphony
Date: Mon, 6 Jul 2026 11:34:31 +0200 [thread overview]
Message-ID: <3ddf65049a048dc4760df1e8ae5af4d3e91ca77f.1783330236.git.stefano.r@variscite.com> (raw)
In-Reply-To: <cover.1783330236.git.stefano.r@variscite.com>
From: Stefano Radaelli <stefano.r@variscite.com>
The VAR-SOM-MX8MN module does not provide an onboard debug console.
UART4 is routed and exposed only on the Symphony carrier board, while
custom carrier designs may choose to expose a different UART.
Move the UART4 node from the SOM device tree to the
imx8mn-var-som-symphony.dts, keeping the SOM dtsi limited to hardware
present on the module itself.
Signed-off-by: Stefano Radaelli <stefano.r@variscite.com>
---
v1->v2:
-
.../dts/freescale/imx8mn-var-som-symphony.dts | 18 ++++++++++++++++++
.../boot/dts/freescale/imx8mn-var-som.dtsi | 18 ------------------
2 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
index 3434b189fa58..b07e71d3adee 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
@@ -15,6 +15,10 @@ / {
model = "Variscite VAR-SOM-MX8MN Symphony evaluation board";
compatible = "variscite,var-som-mx8mn-symphony", "variscite,var-som-mx8mn", "fsl,imx8mn";
+ chosen {
+ stdout-path = &uart4;
+ };
+
reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
compatible = "regulator-fixed";
pinctrl-names = "default";
@@ -171,6 +175,13 @@ &uart3 {
status = "okay";
};
+/* Console */
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
&usbotg1 {
dr_mode = "otg";
hnp-disable;
@@ -234,4 +245,11 @@ MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140
MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140
>;
};
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140
+ MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140
+ >;
+ };
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
index 38ef9e4fdf07..32f101ef2850 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
@@ -11,10 +11,6 @@ / {
model = "Variscite VAR-SOM-MX8MN module";
compatible = "variscite,var-som-mx8mn", "fsl,imx8mn";
- chosen {
- stdout-path = &uart4;
- };
-
memory@40000000 {
device_type = "memory";
reg = <0x0 0x40000000 0 0x40000000>;
@@ -274,13 +270,6 @@ &uart2 {
status = "okay";
};
-/* Console */
-&uart4 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart4>;
- status = "okay";
-};
-
&usbotg1 {
dr_mode = "otg";
usb-role-switch;
@@ -432,13 +421,6 @@ MX8MN_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x140
>;
};
- pinctrl_uart4: uart4grp {
- fsl,pins = <
- MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX 0x140
- MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX 0x140
- >;
- };
-
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x190
--
2.47.3
next prev parent reply other threads:[~2026-07-06 9:34 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-06 9:34 [PATCH v2 00/15] arm64: dts: freescale: imx8mn-var-som: Align SOM and Symphony DTSs Stefano Radaelli
2026-07-06 9:34 ` Stefano Radaelli [this message]
2026-07-06 11:16 ` [PATCH v2 01/15] arm64: dts: freescale: imx8mn-var-som: Move UART4 description to Symphony Peng Fan
2026-07-06 9:34 ` [PATCH v2 02/15] arm64: dts: freescale: imx8mn-var-som: move uSD support to carrier boards Stefano Radaelli
2026-07-06 11:18 ` Peng Fan
2026-07-06 9:34 ` [PATCH v2 03/15] arm64: dts: freescale: imx8mn-var-som: Align fsl,pins tables Stefano Radaelli
2026-07-06 9:34 ` [PATCH v2 04/15] arm64: dts: freescale: imx8mn-var-som: Update FEC support with MaxLinear PHY Stefano Radaelli
2026-07-06 11:21 ` Peng Fan
2026-07-13 16:05 ` Frank Li
2026-07-06 9:34 ` [PATCH v2 05/15] arm64: dts: freescale: imx8mn-var-som: Add support for WM8904 audio codec Stefano Radaelli
2026-07-06 9:34 ` [PATCH v2 06/15] arm64: dts: freescale: imx8mn-var-som: Add MCP251xFD CAN controller Stefano Radaelli
2026-07-06 12:34 ` Peng Fan
2026-07-06 9:34 ` [PATCH v2 07/15] arm64: dts: freescale: imx8mn-var-som: Rework WiFi/BT and add legacy dts Stefano Radaelli
2026-07-06 9:34 ` [PATCH v2 08/15] arm64: dts: freescale: imx8mn-var-som: drop duplicate USB OTG node Stefano Radaelli
2026-07-06 12:34 ` Peng Fan
2026-07-06 9:34 ` [PATCH v2 09/15] arm64: dts: freescale: imx8mn-var-som: enable FlexSPI interface Stefano Radaelli
2026-07-06 9:34 ` [PATCH v2 10/15] arm64: dts: imx8mn-var-som-symphony: Add TPM2 support Stefano Radaelli
2026-07-06 9:34 ` [PATCH v2 11/15] arm64: dts: imx8mn-var-som-symphony: Enable I2C4 Stefano Radaelli
2026-07-06 12:36 ` Peng Fan
2026-07-06 9:34 ` [PATCH v2 12/15] arm64: dts: imx8mn-var-som-symphony: add wakeup sources Stefano Radaelli
2026-07-06 12:37 ` Peng Fan
2026-07-06 9:34 ` [PATCH v2 13/15] arm64: dts: imx8mn-var-som-symphony: keep RGB_SEL low Stefano Radaelli
2026-07-06 12:37 ` Peng Fan
2026-07-06 9:34 ` [PATCH v2 14/15] arm64: dts: imx8mn-var-som-symphony: enable PWM1 Stefano Radaelli
2026-07-06 12:38 ` Peng Fan
2026-07-06 9:34 ` [PATCH v2 15/15] arm64: dts: imx8mn-var-som-symphony: Disable internal RTC Stefano Radaelli
2026-07-06 12:38 ` Peng Fan
2026-07-17 15:17 ` [PATCH v2 00/15] arm64: dts: freescale: imx8mn-var-som: Align SOM and Symphony DTSs Frank.Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3ddf65049a048dc4760df1e8ae5af4d3e91ca77f.1783330236.git.stefano.r@variscite.com \
--to=stefano.radaelli21@gmail.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pierluigi.p@variscite.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=stefano.r@variscite.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®