From: bot+bpf-ci@kernel.org
To: vineet.gupta@linux.dev,ast@kernel.org,daniel@iogearbox.net,andrii@kernel.org,eddyz87@gmail.com,memxor@gmail.com
Cc: martin.lau@linux.dev,song@kernel.org,yonghong.song@linux.dev,jolsa@kernel.org,emil@etsalapatis.com,ihor.solodrai@linux.dev,john.fastabend@gmail.com,shuah@kernel.org,bpf@vger.kernel.org,linux-kernel@vger.kernel.org,linux-kselftest@vger.kernel.org,vineet.gupta@linux.dev,ast@kernel.org,andrii@kernel.org,daniel@iogearbox.net,martin.lau@kernel.org,eddyz87@gmail.com,yonghong.song@linux.dev,mason@kernel.org,ihor.solodrai@linux.dev
Subject: Re: [PATCH bpf-next v3 05/12] selftests/bpf: Cover the low-32 link for zero-extending movs
Date: Tue, 20 Oct 2026 16:53:27 +0000 (UTC) [thread overview]
Message-ID: <3e177386ed0ff37815ee705fb2cb8195952b4301858e4ff4e2b4638d14d94c3d@mail.kernel.org> (raw)
In-Reply-To: <20261020161907.2115379-6-vineet.gupta@linux.dev>
[-- Attachment #1: Type: text/plain, Size: 5759 bytes --]
> selftests/bpf: Cover the low-32 link for zero-extending movs
TL;DR:
- Selftest comment calls the mixed-kind no-sync case unsound, but the program
is safe; it is only lost precision
- Commit message says "Twelve" programs, but there are thirteen
> selftests/bpf: Cover the low-32 link for zero-extending movs
>
> Twelve programs, one per decision the previous patch makes:
>
> - zext_mov_narrow_src: narrowing the source reaches the destination
> - zext_sync_makes_member_const: and over all 64 bits, since the member
> is the zero-extension
> - zext_narrow_dst_keeps_base: the reverse must not happen
> - zext_u32_src_is_full_link: a provably-u32 source still propagates
> - zext_self_mov_no_link: a self-mov mints no id
> - zext_chain_drops_link: a second 32-bit mov drops the link
> - zext_no_sync_between_mixed_kinds: differing kinds do not reach each
> other, in either direction
> - zext_no_sync_from_subreg_base: nor does a member reach a base whose
> high half it knows nothing about
> - zext_sync_between_two_subregs: two low-32 links on one base do
> - zext_unlinked_path_stays_reachable: one unlinked path keeps the
> guarded div reachable
> - zext_mov_breaks_linked_src: forming the link drops the source's own
> - zext_sync_keeps_narrower_member: narrowing the base does not widen a
> member that already proved itself tighter
> - zext_contradiction_keeps_range_sane: a contradiction leaves no empty
> range behind, under BPF_F_TEST_REG_INVARIANTS so the violation is a
> load failure rather than something only dmesg sees
>
> Written in asm so the bytecode is the same whichever compiler built the
> suite.
>
> Signed-off-by: Vineet Gupta <vineet.gupta@linux.dev>
The changelog says "Twelve programs", but the list below it has thirteen
bullets, and the patch adds thirteen programs:
zext_mov_narrow_src, zext_sync_makes_member_const,
zext_contradiction_keeps_range_sane, zext_narrow_dst_keeps_base,
zext_u32_src_is_full_link, zext_self_mov_no_link, zext_chain_drops_link,
zext_no_sync_between_mixed_kinds, zext_no_sync_from_subreg_base,
zext_sync_between_two_subregs, zext_sync_keeps_narrower_member,
zext_unlinked_path_stays_reachable and zext_mov_breaks_linked_src.
The count looks like it was not updated when
zext_contradiction_keeps_range_sane was added. It is the last bullet, but the
third program in the file. Should "Twelve" be "Thirteen"?
> diff --git a/tools/testing/selftests/bpf/progs/verifier_linked_scalars.c b/tools/testing/selftests/bpf/progs/verifier_linked_scalars.c
> --- a/tools/testing/selftests/bpf/progs/verifier_linked_scalars.c
> +++ b/tools/testing/selftests/bpf/progs/verifier_linked_scalars.c
[ ... ]
> @@ -710,4 +710,352 @@ l_exit_%=: \
[ ... ]
> +/*
> + * Two members of one id set carrying different link kinds do not propagate
> + * to each other: r7 is (u32)base and r8 is base + 3, and the deltas were
> + * added at different ALU widths, so narrowing r8 says nothing about r7.
> + * sync_linked_regs() declines the pair on the kinds before the deltas are
> + * ever consulted. Note neither register is the base -- that is r6.
> + */
> +SEC("socket")
> +__failure __msg("div by zero")
> +__naked void zext_no_sync_between_mixed_kinds(void)
> +{
> + asm volatile (" \
> + call %[bpf_get_prandom_u32]; \
> + r6 = r0; \
> + w7 = w6; /* forms the link */ \
> + r8 = r6; \
> + r8 += 3; /* r8 is BPF_REG_LINK_FULL, r7 is BPF_REG_LINK_ZEXT */ \
> + if r8 != 3 goto 1f; /* must not propagate to r7 */ \
> + if w7 == 0 goto 1f; \
> + r0 /= 0; \
> +1: \
> + r0 = 0; \
> + exit; \
> +" :
> + : __imm(bpf_get_prandom_u32)
> + : __clobber_all);
> +}
^^^^
This isn't a bug, but is the comment accurate for this direction? It says
narrowing r8 "says nothing about r7", and the asm comment says the narrowing
"must not propagate to r7".
r8 is a BPF_REG_LINK_FULL member, so r8 == r6 + 3 over all 64 bits. That
relation inverts exactly, so knowing r8 pins the base, and r7 == (u32)(r8 - 3)
follows.
In this program the fall-through of "if r8 != 3 goto 1f" forces r6 == 0, so
r7 == 0, "if w7 == 0 goto 1f" is always taken, and "r0 /= 0" cannot be reached
at runtime. The program is safe. The verifier rejects it only because
sync_linked_regs() skips every pair with differing kinds:
if (reg->link_kind && known_reg->link_kind &&
reg->link_kind != known_reg->link_kind)
continue;
That check exists for the other direction, a ZEXT known_reg against a FULL
member (scalars_alu32_alu64_cross_type), where the 32-bit wrap really does
break the relation. If the differencing arm ran for known=r8 (FULL, delta 3)
and reg=r7 (ZEXT, delta 0), it would compute r8 + (0 - 3) and then
zext_32_to_64(), which gives exactly (u32)(r8 - 3). That is sound.
So this test pins a deliberate loss of precision, not a soundness requirement,
but the comment presents it as unsound. The text is unchanged at the tip of
the series. Someone who later makes the verifier propagate FULL -> ZEXT will
see this test fail, and the comment will suggest the improvement is wrong.
zext_chain_drops_link and zext_mov_breaks_linked_src also reject runtime-safe
programs, but their comments say the link is dropped by rule. Could this one
be worded the same way, for example "sync_linked_regs() declines mixed kinds
even where, as here, the relation would hold"?
---
AI reviewed your patch. Please fix the bug or email reply why it's not a bug.
See: https://github.com/kernel-patches/vmtest/blob/master/ci/claude/README.md
CI run summary: https://github.com/kernel-patches/bpf/actions/runs/39458500836
next prev parent reply other threads:[~2026-10-20 16:53 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-20 16:18 [PATCH bpf-next v3 00/12] bpf: track scalar equality across the low 32 bits Vineet Gupta
2026-10-20 16:18 ` [PATCH bpf-next v3 01/12] bpf: Keep the 32-bit range across a sign extension that cannot change it Vineet Gupta
2026-10-20 16:18 ` [PATCH bpf-next v3 02/12] selftests/bpf: Cover sign extensions that cannot change the range Vineet Gupta
2026-10-20 16:18 ` [PATCH bpf-next v3 03/12] bpf: Prepare linked scalars for relations narrower than 64 bits Vineet Gupta
2026-10-20 17:08 ` bot+bpf-ci
2026-10-20 16:18 ` [PATCH bpf-next v3 04/12] bpf: Track low-32 scalar equality across zero-extending movs Vineet Gupta
2026-10-20 17:09 ` bot+bpf-ci
2026-10-20 16:19 ` [PATCH bpf-next v3 05/12] selftests/bpf: Cover the low-32 link for " Vineet Gupta
2026-10-20 16:53 ` bot+bpf-ci [this message]
2026-10-20 16:19 ` [PATCH bpf-next v3 06/12] bpf: Track low-32 scalar equality across sign-extending movs Vineet Gupta
2026-10-20 16:19 ` [PATCH bpf-next v3 07/12] selftests/bpf: Cover the low-32 link for " Vineet Gupta
2026-10-20 16:19 ` [PATCH bpf-next v3 08/12] bpf: Recover the low 32 bits on the reverse link direction Vineet Gupta
2026-10-20 16:53 ` bot+bpf-ci
2026-10-20 16:19 ` [PATCH bpf-next v3 09/12] bpf: Track low-32 scalar equality across narrowing stack fills Vineet Gupta
2026-10-20 16:19 ` [PATCH bpf-next v3 10/12] selftests/bpf: Cover the low-32 link for " Vineet Gupta
2026-10-20 16:52 ` bot+bpf-ci
2026-10-20 16:19 ` [PATCH bpf-next v3 11/12] [do not merge] bpf: Track low-32 scalar equality across narrowing stack spills Vineet Gupta
2026-10-20 16:19 ` [PATCH bpf-next v3 12/12] [do not merge] selftests/bpf: Cover the low-32 link for " Vineet Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3e177386ed0ff37815ee705fb2cb8195952b4301858e4ff4e2b4638d14d94c3d@mail.kernel.org \
--to=bot+bpf-ci@kernel.org \
--cc=andrii@kernel.org \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=daniel@iogearbox.net \
--cc=eddyz87@gmail.com \
--cc=emil@etsalapatis.com \
--cc=ihor.solodrai@linux.dev \
--cc=john.fastabend@gmail.com \
--cc=jolsa@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=martin.lau@kernel.org \
--cc=martin.lau@linux.dev \
--cc=mason@kernel.org \
--cc=memxor@gmail.com \
--cc=shuah@kernel.org \
--cc=song@kernel.org \
--cc=vineet.gupta@linux.dev \
--cc=yonghong.song@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®