From: Martin Kebert <dmitry.torokhov@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: linux-kernel@vger.kernel.org, jkosina@suse.cz, akpm@linux-foundation.org
Subject: [PATCH 28/37] Input: add Zhen Hua driver
Date: Mon, 10 Mar 2008 13:40:36 +0100 [thread overview]
Message-ID: <3e24e2b5ae03394d9510530f9dd973050fd18730.1208783694.git.dmitry.torokhov@gmail.com> (raw)
In-Reply-To: <cover.1208783694.git.dmitry.torokhov@gmail.com>
This is a driver for Zhen Hua PPM-4CH RC transmitter (commonly used in cheap
Ready To Fly RC helicopters by Walkera) which using "Zhen Hua 5-byte protocol"
for using them as a four axis joystick via serial port. Transmitter connected
to serial port (19200 8N1) sending periodically 5 bytes where first byte is for
synchronization and next four bytes are values of axis.
Signed-off-by: Martin Kebert <gkmarty@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/input/joystick/Kconfig | 12 ++
drivers/input/joystick/Makefile | 1 +
drivers/input/joystick/zhenhua.c | 243 ++++++++++++++++++++++++++++++++++++++
include/linux/serio.h | 1 +
4 files changed, 257 insertions(+), 0 deletions(-)
create mode 100644 drivers/input/joystick/zhenhua.c
diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index 7c662ee..be5c14a 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -193,6 +193,18 @@ config JOYSTICK_TWIDJOY
To compile this driver as a module, choose M here: the
module will be called twidjoy.
+config JOYSTICK_ZHENHUA
+ tristate "5-byte Zhenhua RC transmitter"
+ select SERIO
+ help
+ Say Y here if you have a Zhen Hua PPM-4CH transmitter which is
+ supplied with a ready to fly micro electric indoor helicopters
+ such as EasyCopter, Lama, MiniCopter, DragonFly or Jabo and want
+ to use it via serial cable as a joystick.
+
+ To compile this driver as a module, choose M here: the
+ module will be called zhenhua.
+
config JOYSTICK_DB9
tristate "Multisystem, Sega Genesis, Saturn joysticks and gamepads"
depends on PARPORT
diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile
index e855abb..868b746 100644
--- a/drivers/input/joystick/Makefile
+++ b/drivers/input/joystick/Makefile
@@ -27,5 +27,6 @@ obj-$(CONFIG_JOYSTICK_TURBOGRAFX) += turbografx.o
obj-$(CONFIG_JOYSTICK_TWIDJOY) += twidjoy.o
obj-$(CONFIG_JOYSTICK_WARRIOR) += warrior.o
obj-$(CONFIG_JOYSTICK_XPAD) += xpad.o
+obj-$(CONFIG_JOYSTICK_ZHENHUA) += zhenhua.o
obj-$(CONFIG_JOYSTICK_IFORCE) += iforce/
diff --git a/drivers/input/joystick/zhenhua.c b/drivers/input/joystick/zhenhua.c
new file mode 100644
index 0000000..b585312
--- /dev/null
+++ b/drivers/input/joystick/zhenhua.c
@@ -0,0 +1,243 @@
+/*
+ * derived from "twidjoy.c"
+ *
+ * Copyright (c) 2008 Martin Kebert
+ * Copyright (c) 2001 Arndt Schoenewald
+ * Copyright (c) 2000-2001 Vojtech Pavlik
+ * Copyright (c) 2000 Mark Fletcher
+ *
+ */
+
+/*
+ * Driver to use 4CH RC transmitter using Zhen Hua 5-byte protocol (Walkera Lama,
+ * EasyCopter etc.) as a joystick under Linux.
+ *
+ * RC transmitters using Zhen Hua 5-byte protocol are cheap four channels
+ * transmitters for control a RC planes or RC helicopters with possibility to
+ * connect on a serial port.
+ * Data coming from transmitter is in this order:
+ * 1. byte = synchronisation byte
+ * 2. byte = X axis
+ * 3. byte = Y axis
+ * 4. byte = RZ axis
+ * 5. byte = Z axis
+ * (and this is repeated)
+ *
+ * For questions or feedback regarding this driver module please contact:
+ * Martin Kebert <gkmarty@gmail.com> - but I am not a C-programmer nor kernel
+ * coder :-(
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/init.h>
+
+#define DRIVER_DESC "RC transmitter with 5-byte Zhen Hua protocol joystick driver"
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Constants.
+ */
+
+#define ZHENHUA_MAX_LENGTH 5
+
+/*
+ * Zhen Hua data.
+ */
+
+struct zhenhua {
+ struct input_dev *dev;
+ int idx;
+ unsigned char data[ZHENHUA_MAX_LENGTH];
+ char phys[32];
+};
+
+
+/* bits in all incoming bytes needs to be "reversed" */
+static int zhenhua_bitreverse(int x)
+{
+ x = ((x & 0xaa) >> 1) | ((x & 0x55) << 1);
+ x = ((x & 0xcc) >> 2) | ((x & 0x33) << 2);
+ x = ((x & 0xf0) >> 4) | ((x & 0x0f) << 4);
+ return x;
+}
+
+/*
+ * zhenhua_process_packet() decodes packets the driver receives from the
+ * RC transmitter. It updates the data accordingly.
+ */
+
+static void zhenhua_process_packet(struct zhenhua *zhenhua)
+{
+ struct input_dev *dev = zhenhua->dev;
+ unsigned char *data = zhenhua->data;
+
+ input_report_abs(dev, ABS_Y, data[1]);
+ input_report_abs(dev, ABS_X, data[2]);
+ input_report_abs(dev, ABS_RZ, data[3]);
+ input_report_abs(dev, ABS_Z, data[4]);
+
+ input_sync(dev);
+}
+
+/*
+ * zhenhua_interrupt() is called by the low level driver when characters
+ * are ready for us. We then buffer them for further processing, or call the
+ * packet processing routine.
+ */
+
+static irqreturn_t zhenhua_interrupt(struct serio *serio, unsigned char data, unsigned int flags)
+{
+ struct zhenhua *zhenhua = serio_get_drvdata(serio);
+
+ /* All Zhen Hua packets are 5 bytes. The fact that the first byte
+ * is allways 0xf7 and all others are in range 0x32 - 0xc8 (50-200)
+ * can be used to check and regain sync. */
+
+ if (data == 0xef)
+ zhenhua->idx = 0; /* this byte starts a new packet */
+ else if (zhenhua->idx == 0)
+ return IRQ_HANDLED; /* wrong MSB -- ignore this byte */
+
+ if (zhenhua->idx < ZHENHUA_MAX_LENGTH)
+ zhenhua->data[zhenhua->idx++] = zhenhua_bitreverse(data);
+
+ if (zhenhua->idx == ZHENHUA_MAX_LENGTH) {
+ zhenhua_process_packet(zhenhua);
+ zhenhua->idx = 0;
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * zhenhua_disconnect() is the opposite of zhenhua_connect()
+ */
+
+static void zhenhua_disconnect(struct serio *serio)
+{
+ struct zhenhua *zhenhua = serio_get_drvdata(serio);
+
+ serio_close(serio);
+ serio_set_drvdata(serio, NULL);
+ input_unregister_device(zhenhua->dev);
+ kfree(zhenhua);
+}
+
+/*
+ * zhenhua_connect() is the routine that is called when someone adds a
+ * new serio device. It looks for the Twiddler, and if found, registers
+ * it as an input device.
+ */
+
+static int zhenhua_connect(struct serio *serio, struct serio_driver *drv)
+{
+ struct zhenhua *zhenhua;
+ struct input_dev *input_dev;
+ int err = -ENOMEM;
+
+ zhenhua = kzalloc(sizeof(struct zhenhua), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!zhenhua || !input_dev)
+ goto fail1;
+
+ zhenhua->dev = input_dev;
+ snprintf(zhenhua->phys, sizeof(zhenhua->phys), "%s/input0", serio->phys);
+
+ input_dev->name = "Zhen Hua 5-byte device";
+ input_dev->phys = zhenhua->phys;
+ input_dev->id.bustype = BUS_RS232;
+ input_dev->id.vendor = SERIO_ZHENHUA;
+ input_dev->id.product = 0x0001;
+ input_dev->id.version = 0x0100;
+ input_dev->dev.parent = &serio->dev;
+
+ input_dev->evbit[0] = BIT(EV_ABS);
+ input_set_abs_params(input_dev, ABS_X, 50, 200, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 50, 200, 0, 0);
+ input_set_abs_params(input_dev, ABS_Z, 50, 200, 0, 0);
+ input_set_abs_params(input_dev, ABS_RZ, 50, 200, 0, 0);
+
+ serio_set_drvdata(serio, zhenhua);
+
+ err = serio_open(serio, drv);
+ if (err)
+ goto fail2;
+
+ err = input_register_device(zhenhua->dev);
+ if (err)
+ goto fail3;
+
+ return 0;
+
+ fail3: serio_close(serio);
+ fail2: serio_set_drvdata(serio, NULL);
+ fail1: input_free_device(input_dev);
+ kfree(zhenhua);
+ return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static struct serio_device_id zhenhua_serio_ids[] = {
+ {
+ .type = SERIO_RS232,
+ .proto = SERIO_ZHENHUA,
+ .id = SERIO_ANY,
+ .extra = SERIO_ANY,
+ },
+ { 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, zhenhua_serio_ids);
+
+static struct serio_driver zhenhua_drv = {
+ .driver = {
+ .name = "zhenhua",
+ },
+ .description = DRIVER_DESC,
+ .id_table = zhenhua_serio_ids,
+ .interrupt = zhenhua_interrupt,
+ .connect = zhenhua_connect,
+ .disconnect = zhenhua_disconnect,
+};
+
+/*
+ * The functions for inserting/removing us as a module.
+ */
+
+static int __init zhenhua_init(void)
+{
+ return serio_register_driver(&zhenhua_drv);
+}
+
+static void __exit zhenhua_exit(void)
+{
+ serio_unregister_driver(&zhenhua_drv);
+}
+
+module_init(zhenhua_init);
+module_exit(zhenhua_exit);
diff --git a/include/linux/serio.h b/include/linux/serio.h
index 9f38250..95674d9 100644
--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -211,5 +211,6 @@ static inline void serio_unpin_driver(struct serio *serio)
#define SERIO_TOUCHWIN 0x33
#define SERIO_TAOSEVM 0x34
#define SERIO_FUJITSU 0x35
+#define SERIO_ZHENHUA 0x36
#endif
--
1.5.5.rc2.6.gf58d
next prev parent reply other threads:[~2008-04-21 13:32 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-21 13:14 [PATCH 00/37] Input queue for 2.6.26 merge window Dmitry Torokhov
2008-03-10 10:08 ` [PATCH 27/37] Input: aiptek - add support for Genius G-PEN 560 tablet Guryanov Dmitry
2008-03-10 12:40 ` Martin Kebert [this message]
2008-03-10 12:43 ` [PATCH 29/37] Input: fix ordering in joystick Makefile Jiri Kosina
2008-04-21 13:40 ` Jiri Kosina
2008-04-21 16:20 ` Dmitry Torokhov
2008-04-21 14:22 ` Adrian Bunk
2008-04-21 15:39 ` Dmitry Torokhov
2008-04-21 15:54 ` Adrian Bunk
2008-04-02 4:41 ` [PATCH 01/37] Input: remove private member from input_dev structure Dmitry Torokhov
2008-04-02 4:42 ` [PATCH 02/37] Input: locomokbd - add 'off' button support for Sharp Collie/Poodle Helge Deller
2008-04-02 4:43 ` [PATCH 03/37] Input: ads7846 - simplify support of external vREF (and ads7843) David Brownell
2008-04-02 4:51 ` [PATCH 04/37] Input: add support for WM97xx familty touchscreens Mark Brown
2008-04-02 4:51 ` [PATCH 05/37] Input: WM97xx - add chip driver for WM9705 touchscreen Mark Brown
2008-04-02 4:51 ` [PATCH 06/37] Input: WM97xx - add chip driver for WM9712 touchscreen Mark Brown
2008-04-02 4:51 ` [PATCH 07/37] Input: WM97xx - add chip driver for WM97123 touchscreen Mark Brown
2008-04-02 4:51 ` [PATCH 08/37] Input: WM97xx - add support for streaming mode on Mainstone Mark Brown
2008-04-02 14:02 ` [PATCH 09/37] Input: appletouch - add product IDs for the 4th generation MacBooks Tobias Mueller
2008-04-02 15:22 ` [PATCH 10/37] Input: tosakbd - fix suspend Dmitry Baryshkov
2008-04-03 20:17 ` [PATCH 11/37] Input: xpad - match xbox 360 devices with interface info Anssi Hannula
2008-04-03 20:18 ` [PATCH 12/37] Input: xpad - fix dpad handling of unknown devices Anssi Hannula
2008-04-03 20:18 ` [PATCH 13/37] Input: xpad - fix inverted Y and RY axes Anssi Hannula
2008-04-03 20:18 ` [PATCH 14/37] Input: xpad - add more xbox 360 controller ids Anssi Hannula
2008-04-03 20:18 ` [PATCH 15/37] Input: xpad - do not report nonexistent buttons for xbox360 Anssi Hannula
2008-04-03 20:18 ` [PATCH 16/37] Input: xpad - enable force feedback on xbox 360 controllers only Anssi Hannula
2008-04-03 20:19 ` [PATCH 17/37] Input: xpad - drop obsolete driver versioning Anssi Hannula
2008-04-03 20:19 ` [PATCH 18/37] Input: xpad - add support for wireless xbox360 controllers Brian Magnuson
2008-04-03 20:19 ` [PATCH 19/37] Input: xpad - don't use GFP_ATOMIC Oliver Neukum
2008-04-04 19:31 ` [PATCH 20/37] Input: usbtouchscreen - don't use DMA on stack Oliver Neukum
2008-04-15 5:30 ` [PATCH 21/37] Input: put ledstate in the keyboard notifier Karl Dahlke
2008-04-15 5:30 ` [PATCH 22/37] Input: add PS/2 serio driver for AVR32 devices Hans-Christian Egtvedt
2008-04-21 13:33 ` Hans-Christian Egtvedt
2008-04-21 15:39 ` Dmitry Torokhov
2008-04-15 5:31 ` [PATCH 23/37] Input: gpio_keys - irq handling cleanup David Brownell
2008-04-15 5:31 ` [PATCH 24/37] Input: omap-keypad - fix build warning David Brownell
2008-04-15 5:31 ` [PATCH 25/37] Input: xpad - set proper buffer length for outgoing requests Michael Gruber
2008-04-15 5:31 ` [PATCH 26/37] Input: wacom - implement suspend and autosuspend Oliver Neukum
2008-04-17 13:24 ` [PATCH 30/37] Input: wm97xx-core - only schedule interrupt handler if not already scheduled Mark Brown
2008-04-17 13:24 ` [PATCH 31/37] Input: wm97xx-core - use IRQF_SAMPLE_RANDOM Mark Brown
2008-04-17 13:24 ` [PATCH 32/37] Input: wm97xx-core - support use as a wakeup source Mark Brown
2008-04-17 13:28 ` [PATCH 33/37] Input: drivers/char/keyboard.c - use time_after Julia Lawall
2008-04-18 4:24 ` [PATCH 34/37] Input: add MODULE_ALIAS() to hotpluggable platform modules Kay Sievers
2008-04-18 4:25 ` [PATCH 35/37] Input: bf54x-keys - add infrastructure for keypad wakeups Michael Hennerich
2008-04-18 4:25 ` [PATCH 36/37] Input: i8042 - fix incorrect usage of strncpy and strncat Roel Kluin
2008-04-18 4:25 ` [PATCH 37/37] Input: mac_hid - add lockdep annotation to emumousebtn Peter Zijlstra
2008-04-21 15:11 ` [PATCH 00/37] Input queue for 2.6.26 merge window Henrique de Moraes Holschuh
2008-04-21 15:44 ` Dmitry Torokhov
2008-04-21 16:58 ` Henrique de Moraes Holschuh
2008-04-26 13:24 ` [build bug] " Ingo Molnar
2008-04-27 4:07 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3e24e2b5ae03394d9510530f9dd973050fd18730.1208783694.git.dmitry.torokhov@gmail.com \
--to=dmitry.torokhov@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=jkosina@suse.cz \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®