From: Syed Nayyar Waris <syednwaris@gmail.com>
To: linus.walleij@linaro.org, akpm@linux-foundation.org
Cc: andriy.shevchenko@linux.intel.com, vilhelm.gray@gmail.com,
bgolaszewski@baylibre.com, michal.simek@xilinx.com,
linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v11 4/4] gpio: xilinx: Utilize generic bitmap_get_value and _set_value
Date: Tue, 6 Oct 2020 14:56:15 +0530 [thread overview]
Message-ID: <3e27882cfa1eebc2905c0fa9aecfd2326d82c305.1601974764.git.syednwaris@gmail.com> (raw)
In-Reply-To: <cover.1601974764.git.syednwaris@gmail.com>
This patch reimplements the xgpio_set_multiple function in
drivers/gpio/gpio-xilinx.c to use the new generic functions:
bitmap_get_value and bitmap_set_value. The code is now simpler
to read and understand. Moreover, instead of looping for each bit
in xgpio_set_multiple function, now we can check each channel at
a time and save cycles.
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Syed Nayyar Waris <syednwaris@gmail.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
Changes in v11:
- Change variable name 'flag' to 'flags'.
Changes in v10:
- No change.
Changes in v9:
- Remove looping of 'for_each_set_clump' and instead process two
halves of a 64-bit bitmap separately or individually. Use normal spin_lock
call for second inner lock. And take the spin_lock_init call outside the 'if'
condition in the 'probe' function of driver.
Changes in v8:
- No change.
Changes in v7:
- No change.
Changes in v6:
- No change.
Changes in v5:
- Minor change: Inline values '32' and '64' in code for better
code readability.
Changes in v4:
- Minor change: Inline values '32' and '64' in code for better
code readability.
Changes in v3:
- No change.
Changes in v2:
- No change
drivers/gpio/gpio-xilinx.c | 64 +++++++++++++++++++-------------------
1 file changed, 32 insertions(+), 32 deletions(-)
diff --git a/drivers/gpio/gpio-xilinx.c b/drivers/gpio/gpio-xilinx.c
index 67f9f82e0db0..f86bee271246 100644
--- a/drivers/gpio/gpio-xilinx.c
+++ b/drivers/gpio/gpio-xilinx.c
@@ -138,37 +138,37 @@ static void xgpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
{
unsigned long flags;
struct xgpio_instance *chip = gpiochip_get_data(gc);
- int index = xgpio_index(chip, 0);
- int offset, i;
-
- spin_lock_irqsave(&chip->gpio_lock[index], flags);
-
- /* Write to GPIO signals */
- for (i = 0; i < gc->ngpio; i++) {
- if (*mask == 0)
- break;
- /* Once finished with an index write it out to the register */
- if (index != xgpio_index(chip, i)) {
- xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET +
- index * XGPIO_CHANNEL_OFFSET,
- chip->gpio_state[index]);
- spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
- index = xgpio_index(chip, i);
- spin_lock_irqsave(&chip->gpio_lock[index], flags);
- }
- if (__test_and_clear_bit(i, mask)) {
- offset = xgpio_offset(chip, i);
- if (test_bit(i, bits))
- chip->gpio_state[index] |= BIT(offset);
- else
- chip->gpio_state[index] &= ~BIT(offset);
- }
- }
-
- xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET +
- index * XGPIO_CHANNEL_OFFSET, chip->gpio_state[index]);
-
- spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
+ u32 *const state = chip->gpio_state;
+ unsigned int *const width = chip->gpio_width;
+
+ DECLARE_BITMAP(old, 64);
+ DECLARE_BITMAP(new, 64);
+ DECLARE_BITMAP(changed, 64);
+
+ spin_lock_irqsave(&chip->gpio_lock[0], flags);
+ spin_lock(&chip->gpio_lock[1]);
+
+ bitmap_set_value(old, state[0], 0, width[0]);
+ bitmap_set_value(old, state[1], width[0], width[1]);
+ bitmap_replace(new, old, bits, mask, gc->ngpio);
+
+ bitmap_set_value(old, state[0], 0, 32);
+ bitmap_set_value(old, state[1], 32, 32);
+ state[0] = bitmap_get_value(new, 0, width[0]);
+ state[1] = bitmap_get_value(new, width[0], width[1]);
+ bitmap_set_value(new, state[0], 0, 32);
+ bitmap_set_value(new, state[1], 32, 32);
+ bitmap_xor(changed, old, new, 64);
+
+ if (((u32 *)changed)[0])
+ xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET,
+ state[0]);
+ if (((u32 *)changed)[1])
+ xgpio_writereg(chip->regs + XGPIO_DATA_OFFSET +
+ XGPIO_CHANNEL_OFFSET, state[1]);
+
+ spin_unlock(&chip->gpio_lock[1]);
+ spin_unlock_irqrestore(&chip->gpio_lock[0], flags);
}
/**
@@ -292,6 +292,7 @@ static int xgpio_probe(struct platform_device *pdev)
chip->gpio_width[0] = 32;
spin_lock_init(&chip->gpio_lock[0]);
+ spin_lock_init(&chip->gpio_lock[1]);
if (of_property_read_u32(np, "xlnx,is-dual", &is_dual))
is_dual = 0;
@@ -314,7 +315,6 @@ static int xgpio_probe(struct platform_device *pdev)
&chip->gpio_width[1]))
chip->gpio_width[1] = 32;
- spin_lock_init(&chip->gpio_lock[1]);
}
chip->gc.base = -1;
--
2.26.2
next prev parent reply other threads:[~2020-10-06 9:26 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-06 9:20 [PATCH v11 0/4] Introduce the for_each_set_clump macro Syed Nayyar Waris
2020-10-06 9:22 ` [PATCH v11 1/4] bitops: " Syed Nayyar Waris
2020-10-06 11:27 ` Andy Shevchenko
2020-10-15 22:53 ` Syed Nayyar Waris
2020-10-16 9:17 ` Andy Shevchenko
2020-10-16 11:45 ` Syed Nayyar Waris
2020-10-06 9:23 ` [PATCH v11 2/4] lib/test_bitmap.c: Add for_each_set_clump test cases Syed Nayyar Waris
2020-10-06 9:24 ` [PATCH v11 3/4] gpio: thunderx: Utilize for_each_set_clump macro Syed Nayyar Waris
2020-10-06 9:26 ` Syed Nayyar Waris [this message]
2020-10-07 8:38 ` [PATCH v11 0/4] Introduce the " Linus Walleij
2020-10-23 13:20 ` Syed Nayyar Waris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3e27882cfa1eebc2905c0fa9aecfd2326d82c305.1601974764.git.syednwaris@gmail.com \
--to=syednwaris@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=bgolaszewski@baylibre.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=vilhelm.gray@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®