Re: [PATCH] arm64: dts: ti: k3-am654-base-board: Add I2C I/O expander

[Andrew Davis <afd@ti.com>]

On 9/19/23 12:03 AM, Ravi Gunasekaran wrote:
> AM654 baseboard has two TCA9554 I/O expander on the WKUP_I2C0 bus.
> The expander at address 0x38 is used to detect daughter cards.
> Add a node for this I/O expander.
> 
> Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
> ---
>   arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 7 +++++++
>   1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> index f5c26e9fba98..035b20386ef3 100644
> --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> @@ -381,6 +381,13 @@
>   		interrupt-controller;
>   		#interrupt-cells = <2>;
>   	};
> +
> +	pca9554_1: gpio@38 {

As this is at a lower address than the other expander(39), why
not put it before that one to keep these in order?

Also, do you need the label(pca9554_1:) for anything, if not
drop it for now.

Andrew

> +		compatible = "nxp,pca9554";
> +		reg = <0x38>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +	};
>   };
>   
>   &mcu_i2c0 {
> 
> base-commit: dfa449a58323de195773cf928d99db4130702bf7