Hello, On Tue, 2025-06-17 at 16:58 +0200, Aleksander Morgado wrote: > On Tue, Jun 17, 2025 at 11:27 AM Manivannan Sadhasivam > wrote: > > > > On Wed, May 28, 2025 at 10:59:43AM -0700, Adam Xue wrote: > > > > + Thomas and Aleksander (for EM919X related question) > > > > > Add MHI controller config for EM929x. It uses the same > > > configuration > > > as EM919x. Also set the MRU to 32768 to improve downlink > > > throughput. > > > > > > > This also affects the EM919X modem. So I want either Thomas or > > Aleksander to > > confirm that it doesn't cause any regression. Sorry, I no longer have the modem to test. Kind regards, Thomas Perrot > > > > Rest looks good to me. > > > > - Mani > > > > > 02:00.0 Unassigned class [ff00]: Qualcomm Technologies, Inc > > > Device 0308 > > >       Subsystem: Device 18d7:0301 > > > > > > Signed-off-by: Adam Xue > > > --- > > >  drivers/bus/mhi/host/pci_generic.c | 4 ++++ > > >  1 file changed, 4 insertions(+) > > > > > > diff --git a/drivers/bus/mhi/host/pci_generic.c > > > b/drivers/bus/mhi/host/pci_generic.c > > > index 03aa88795209..9bf8e7991745 100644 > > > --- a/drivers/bus/mhi/host/pci_generic.c > > > +++ b/drivers/bus/mhi/host/pci_generic.c > > > @@ -695,6 +695,7 @@ static const struct mhi_pci_dev_info > > > mhi_sierra_em919x_info = { > > >       .config = &modem_sierra_em919x_config, > > >       .bar_num = MHI_PCI_DEFAULT_BAR_NUM, > > >       .dma_data_width = 32, > > > +     .mru_default = 32768, > > I cannot test this now, I need to look for the EM9191 that I know I > have somewhere, but this default MRU update feels right. Hopefully > Thomas can verify. > -- Thomas Perrot, Bootlin Embedded Linux and kernel engineering https://bootlin.com