Re: [PATCH v2 0/2] Add driver for Himax HX8279 DriverIC panels

[Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>]

On Tue, 2025-02-18 at 15:39 +0100, AngeloGioacchino Del Regno wrote:
> Changes in v2:
>  - Removed unneeded mipi_dsi_device_unregister() call for secondary
>    DSI: as the driver is using devm, that's not necessary (CJ)
>  - Removed superfluous if branch as pointed out by CJ
> 
> This series adds a driver for DSI panels using the Himax HX8279 and
> HX8279-D DriverICs, and introduces one panel using such a
> configuration,
> the Startek KX070FHFID078.
> 
> This panel is found on the latest hardware revisions of some MediaTek
> Genio Evaluation Kits, and specifically, at least:
>  - Genio 510 EVK
>  - Genio 700 EVK
>  - Genio 1200 EVK
> 
> This driver was tested on all of the aforementioned boards.
> 
> AngeloGioacchino Del Regno (2):
>   dt-bindings: display: panel: Add Himax HX8279/HX8279-D
>   drm: panel: Add driver for Himax HX8279 and Startek KD070FHFID078
> 
>  .../bindings/display/panel/himax,hx8279.yaml  |  74 ++
>  drivers/gpu/drm/panel/Kconfig                 |  11 +
>  drivers/gpu/drm/panel/Makefile                |   1 +
>  drivers/gpu/drm/panel/panel-himax-hx8279.c    | 905
> ++++++++++++++++++
>  4 files changed, 991 insertions(+)
>  create mode 100644
> Documentation/devicetree/bindings/display/panel/himax,hx8279.yaml
>  create mode 100644 drivers/gpu/drm/panel/panel-himax-hx8279.c
> 
Tested-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com> # on
Genio 510 EVK and Genio 1200 EVK