mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Sverdlin, Alexander" <alexander.sverdlin@siemens.com>
To: "broonie@kernel.org" <broonie@kernel.org>,
	"carlos.song@nxp.com" <carlos.song@nxp.com>
Cc: "linux-spi@vger.kernel.org" <linux-spi@vger.kernel.org>,
	"imx@lists.linux.dev" <imx@lists.linux.dev>,
	"haibo.chen@nxp.com" <haibo.chen@nxp.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-imx@nxp.com" <linux-imx@nxp.com>,
	"jun.li@nxp.com" <jun.li@nxp.com>
Subject: Re: [PATCH] spi: spi-fsl-lpspi: remove redundant spi_controller_put call
Date: Wed, 3 Apr 2024 08:51:12 +0000	[thread overview]
Message-ID: <3edc4bb76ce0bc96f90cee789e1d0cfd979d356a.camel@siemens.com> (raw)
In-Reply-To: <20240403084029.2000544-1-carlos.song@nxp.com>

Hi Carlos!

On Wed, 2024-04-03 at 16:40 +0800, carlos.song@nxp.com wrote:
> devm_spi_alloc_controller will allocate an SPI controller and
> automatically release a reference on it when dev is unbound from
> its driver. It doesn't need to call spi_controller_put explicitly
> to put the reference when lpspi driver failed initialization.
> 
> Fixes: 2ae0ab0143fc ("spi: lpspi: Avoid potential use-after-free in probe()")
> Signed-off-by: Carlos Song <carlos.song@nxp.com>

You are absolutely right!
Sorry for the stupid mistake and thanks for the patch!

Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>

> ---
>  drivers/spi/spi-fsl-lpspi.c | 14 ++++++--------
>  1 file changed, 6 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
> index 079035db7dd8..92a662d1b55c 100644
> --- a/drivers/spi/spi-fsl-lpspi.c
> +++ b/drivers/spi/spi-fsl-lpspi.c
> @@ -852,39 +852,39 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
>         fsl_lpspi->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
>         if (IS_ERR(fsl_lpspi->base)) {
>                 ret = PTR_ERR(fsl_lpspi->base);
> -               goto out_controller_put;
> +               return ret;
>         }
>         fsl_lpspi->base_phys = res->start;
>  
>         irq = platform_get_irq(pdev, 0);
>         if (irq < 0) {
>                 ret = irq;
> -               goto out_controller_put;
> +               return ret;
>         }
>  
>         ret = devm_request_irq(&pdev->dev, irq, fsl_lpspi_isr, 0,
>                                dev_name(&pdev->dev), fsl_lpspi);
>         if (ret) {
>                 dev_err(&pdev->dev, "can't get irq%d: %d\n", irq, ret);
> -               goto out_controller_put;
> +               return ret;
>         }
>  
>         fsl_lpspi->clk_per = devm_clk_get(&pdev->dev, "per");
>         if (IS_ERR(fsl_lpspi->clk_per)) {
>                 ret = PTR_ERR(fsl_lpspi->clk_per);
> -               goto out_controller_put;
> +               return ret;
>         }
>  
>         fsl_lpspi->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
>         if (IS_ERR(fsl_lpspi->clk_ipg)) {
>                 ret = PTR_ERR(fsl_lpspi->clk_ipg);
> -               goto out_controller_put;
> +               return ret;
>         }
>  
>         /* enable the clock */
>         ret = fsl_lpspi_init_rpm(fsl_lpspi);
>         if (ret)
> -               goto out_controller_put;
> +               return ret;
>  
>         ret = pm_runtime_get_sync(fsl_lpspi->dev);
>         if (ret < 0) {
> @@ -945,8 +945,6 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
>         pm_runtime_dont_use_autosuspend(fsl_lpspi->dev);
>         pm_runtime_put_sync(fsl_lpspi->dev);
>         pm_runtime_disable(fsl_lpspi->dev);
> -out_controller_put:
> -       spi_controller_put(controller);
>  
>         return ret;
>  }

-- 
Alexander Sverdlin
Siemens AG
www.siemens.com

  reply	other threads:[~2024-04-03  8:51 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-03  8:40 carlos.song
2024-04-03  8:51 ` Sverdlin, Alexander [this message]
2024-04-03 10:09   ` Carlos Song
2024-04-03 13:32 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3edc4bb76ce0bc96f90cee789e1d0cfd979d356a.camel@siemens.com \
    --to=alexander.sverdlin@siemens.com \
    --cc=broonie@kernel.org \
    --cc=carlos.song@nxp.com \
    --cc=haibo.chen@nxp.com \
    --cc=imx@lists.linux.dev \
    --cc=jun.li@nxp.com \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®