Re: [PATCH v2 3/4] wifi: ath11k: Connect to the QMI server belonging to the device owned by this driver

[Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>]

On 9/21/2026 4:53 PM, Manivannan Sadhasivam via B4 Relay wrote:
> From: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
> 
> When two identical ath11k PCIe devices are connected to the same host, both
> advertise the WLFW service with the same service and instance id. The QMI
> lookup reports both servers to each device, so a device may connect to the
> firmware running on the other device.
> 
> But now, QRTR provides each MHI endpoint a unique node id which is
> different from the node id announced by the device. So use the same id to
> pick the correct server. Add a get_qrtr_node_id() HIF callback that returns
> the node id derived from the MHI controller index and zero for transports
> that do not assign one. In the new_server callback, skip any service whose
> node id does not match. A node id of zero disables the check, so transports
> that do not assign one keep their current behavior.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
> ---
>   drivers/net/wireless/ath/ath11k/hif.h |  9 +++++++++
>   drivers/net/wireless/ath/ath11k/pci.c |  9 +++++++++
>   drivers/net/wireless/ath/ath11k/qmi.c | 10 ++++++++++
>   3 files changed, 28 insertions(+)
> 
> diff --git a/drivers/net/wireless/ath/ath11k/hif.h b/drivers/net/wireless/ath/ath11k/hif.h
> index 017fed1b4bd1..0da9025c7ed8 100644
> --- a/drivers/net/wireless/ath/ath11k/hif.h
> +++ b/drivers/net/wireless/ath/ath11k/hif.h
> @@ -32,6 +32,7 @@ struct ath11k_hif_ops {
>   	void (*ce_irq_disable)(struct ath11k_base *ab);
>   	void (*get_ce_msi_idx)(struct ath11k_base *ab, u32 ce_id, u32 *msi_idx);
>   	void (*coredump_download)(struct ath11k_base *ab);
> +	int (*get_qrtr_node_id)(struct ath11k_base *ab);
>   };
>   
>   static inline void ath11k_hif_ce_irq_enable(struct ath11k_base *ab)
> @@ -159,4 +160,12 @@ static inline void ath11k_hif_coredump_download(struct ath11k_base *ab)
>   		ab->hif.ops->coredump_download(ab);
>   }
>   
> +static inline int ath11k_hif_get_qrtr_node_id(struct ath11k_base *ab)
> +{
> +	if (!ab->hif.ops->get_qrtr_node_id)
> +		return 0;
> +
> +	return ab->hif.ops->get_qrtr_node_id(ab);
> +}
> +
>   #endif /* _HIF_H_ */
> diff --git a/drivers/net/wireless/ath/ath11k/pci.c b/drivers/net/wireless/ath/ath11k/pci.c
> index a163168f3617..4d327b5cc98a 100644
> --- a/drivers/net/wireless/ath/ath11k/pci.c
> +++ b/drivers/net/wireless/ath/ath11k/pci.c
> @@ -10,6 +10,7 @@
>   #include <linux/of.h>
>   #include <linux/time.h>
>   #include <linux/vmalloc.h>
> +#include <net/qrtr.h>
>   
>   #include "pci.h"
>   #include "core.h"
> @@ -900,6 +901,13 @@ static int ath11k_pci_start(struct ath11k_base *ab)
>   	return 0;
>   }
>   
> +static int ath11k_pci_get_qrtr_node_id(struct ath11k_base *ab)
> +{
> +	struct ath11k_pci *ab_pci = ath11k_pci_priv(ab);
> +
> +	return qrtr_host_node_id(ab_pci->mhi_ctrl->index);

nit: since qrtr_host_node_id() returns node_id in unsigned int,
may be maintain that in the return type of the callers as well.
Mostly harmless as it is unlikely that node_id is allocated with
an extremely high id. Either way is fine with me. Same applicable
for ath12k patch as well.


Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>