From: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
To: Vijendar Mukunda <Vijendar.Mukunda@amd.com>, broonie@kernel.org
Cc: alsa-devel@alsa-project.org, lgirdwood@gmail.com, perex@perex.cz,
tiwai@suse.com, yung-chuan.liao@linux.intel.com,
Basavaraj.Hiregoudar@amd.com, Sunil-kumar.Dommati@amd.com,
venkataprasad.potturu@amd.com, Syed.SabaKareem@amd.com,
Mario.Limonciello@amd.com, Richard.Gong@amd.com,
Poojitha.N@amd.com, linux-sound@vger.kernel.org,
linux-kernel@vger.kernel.org,
sound-open-firmware@alsa-project.org
Subject: Re: [PATCH v4 00/16] ASoC: amd: acp: ACP7.B/7.F SoundWire machine driver support
Date: Sun, 1 Nov 2026 19:34:20 +0100 [thread overview]
Message-ID: <3f3d7e4b-dd5a-4ef9-806e-5bc98a40d2d3@linux.dev> (raw)
In-Reply-To: <20261030094714.1123396-1-Vijendar.Mukunda@amd.com>
On 10/30/26 10:45, Vijendar Mukunda wrote:
> This series adds SoundWire machine driver support for ACP7.B and ACP7.F
> platforms. It extends the existing AMD ACP SoundWire infrastructure with
> per-platform CPU pin ID lookup, PDM controller selection via ACPI and DMI
> quirks, DMIC DAI link and components string handling, PCI subsystem ID
> propagation, and ACPI machine tables for RT721/RT722/RT1320 codec
> configurations on both platforms.
>
> Changes in v4:
> - Patch 1: fix missing asoc_sdw_mc_dailink_exit_loop() cleanup on
> devm_kasprintf() failure in acp-sdw-sof-mach.c mc_probe() (new).
> - Patch 2: fix missing asoc_sdw_mc_dailink_exit_loop() cleanup on
> both devm_kasprintf() failure paths in acp-sdw-legacy-mach.c
> mc_probe(); update commit message to reference the correct function
> name soc_card_dai_links_create() instead of sof_card_dai_links_create()
> (new).
> - Patch 3: remove unused ACP63_SDW_MAX_CPU_DAIS define (new).
> - Patch 5 (was 2): add comments above ACP7X_SW_AUDIO* define block
> and get_acp7x_cpu_pin_id() to document the dedicated per-port DMA
> layout and the port-to-use-case mapping.
> - Patch 9 (was 6): replace misleading "No functional change" claim
> with an accurate description of the behavioural change for platforms
> where ignore_internal_dmic is true (dmic_num now stays zero at the
> gate rather than reaching the dmic_num > 0 block).
>
> Changes in v3:
> - Patch 3: update subject and changelog to accurately describe the new
> PDM controller selection infrastructure being added.
> - Patch 5: fix commit subject prefix from "amd: acp7x:" to "amd: acp:"
> since the change is in the generic ACP SoundWire machine driver
> (acp-sdw-sof-mach.c), not the ACP7x-specific SOF driver.
>
> Changes in v2:
> - Patch 6: simplify the DMIC enable condition as suggested by Pierre:
> evaluate the three-way boolean once and nest the ignore_internal_dmic
> check inside, avoiding the double-tested condition from v1.
>
> Vijendar Mukunda (16):
> ASoC: amd: acp: fix missing cleanup on devm_kasprintf() failure in
> mc_probe()
> ASoC: amd: acp: fix missing cleanup on devm_kasprintf() failure in
> legacy SDW machine driver
> ASoC: amd: sdw: remove unused ACP63_SDW_MAX_CPU_DAIS define
> ASoC: amd: acp: add ACP7.B/7.F SoundWire link count for machine driver
> ASoC: amd: acp: add ACP7.B/7.F SoundWire DAI link support
> ASoC: amd: acp: add PDM controller selection for ACP7.B/7.F SoundWire
> machine driver
> ASoC: amd: acp: log ASOC_SDW_ACP_DMIC1 quirk in SOF SoundWire machine
> driver
> ASoC: amd: acp: enable DMIC DAI link based on PDM controller selection
> ASoC: amd: acp: move ignore_internal_dmic gate to DMIC enable
> condition
> ASoC: amd: acp: add DMIC components string for SOF SoundWire machine
> driver
> ASoC: amd: acp: set PCI subsystem ID for SOF SoundWire machine driver
> ASoC: amd: acp: fix MODULE_AUTHOR missing closing angle bracket
> ASoC: amd: acp: add ACPI machine tables for ACP7.F SoundWire
> ASoC: SOF: amd: add alt_machines for ACP7.F SOF SoundWire
> ASoC: amd: acp: add SoundWire machine table for ACP7.B platform
> ASoC: SOF: amd: register SoundWire alt_machines for ACP7.B
>
> sound/soc/amd/acp/Makefile | 2 +-
> sound/soc/amd/acp/acp-sdw-legacy-mach.c | 8 +-
> sound/soc/amd/acp/acp-sdw-mach-common.c | 48 ++++++
> sound/soc/amd/acp/acp-sdw-sof-mach.c | 109 +++++++++++--
> sound/soc/amd/acp/amd-acp7x-acpi-match.c | 198 +++++++++++++++++++++++
> sound/soc/amd/acp/soc_amd_sdw_common.h | 45 +++++-
> sound/soc/amd/mach-config.h | 2 +
> sound/soc/sof/amd/pci-acp7x.c | 2 +
> 8 files changed, 396 insertions(+), 18 deletions(-)
> create mode 100644 sound/soc/amd/acp/amd-acp7x-acpi-match.c
For the patchset:
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
I added two nit-pick comments on naming and DMIC0/DMIC1 explanations, in
case you respin a v5.
next prev parent reply other threads:[~2026-11-01 18:34 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-30 9:45 Vijendar Mukunda
2026-10-30 9:45 ` [PATCH v4 01/16] ASoC: amd: acp: fix missing cleanup on devm_kasprintf() failure in mc_probe() Vijendar Mukunda
2026-10-30 9:45 ` [PATCH v4 02/16] ASoC: amd: acp: fix missing cleanup on devm_kasprintf() failure in legacy SDW machine driver Vijendar Mukunda
2026-10-30 9:45 ` [PATCH v4 03/16] ASoC: amd: sdw: remove unused ACP63_SDW_MAX_CPU_DAIS define Vijendar Mukunda
2026-10-30 9:45 ` [PATCH v4 04/16] ASoC: amd: acp: add ACP7.B/7.F SoundWire link count for machine driver Vijendar Mukunda
2026-10-30 9:45 ` [PATCH v4 05/16] ASoC: amd: acp: add ACP7.B/7.F SoundWire DAI link support Vijendar Mukunda
2026-10-30 9:45 ` [PATCH v4 06/16] ASoC: amd: acp: add PDM controller selection for ACP7.B/7.F SoundWire machine driver Vijendar Mukunda
2026-11-01 18:28 ` Pierre-Louis Bossart
2026-11-02 5:42 ` Mukunda,Vijendar
2026-10-30 9:45 ` [PATCH v4 07/16] ASoC: amd: acp: log ASOC_SDW_ACP_DMIC1 quirk in SOF " Vijendar Mukunda
2026-10-30 9:45 ` [PATCH v4 08/16] ASoC: amd: acp: enable DMIC DAI link based on PDM controller selection Vijendar Mukunda
2026-10-30 9:45 ` [PATCH v4 09/16] ASoC: amd: acp: move ignore_internal_dmic gate to DMIC enable condition Vijendar Mukunda
2026-10-30 9:45 ` [PATCH v4 10/16] ASoC: amd: acp: add DMIC components string for SOF SoundWire machine driver Vijendar Mukunda
2026-10-30 9:45 ` [PATCH v4 11/16] ASoC: amd: acp: set PCI subsystem ID " Vijendar Mukunda
2026-10-30 9:45 ` [PATCH v4 12/16] ASoC: amd: acp: fix MODULE_AUTHOR missing closing angle bracket Vijendar Mukunda
2026-10-30 9:45 ` [PATCH v4 13/16] ASoC: amd: acp: add ACPI machine tables for ACP7.F SoundWire Vijendar Mukunda
2026-11-01 18:24 ` Pierre-Louis Bossart
2026-11-02 5:59 ` Mukunda,Vijendar
2026-10-30 9:45 ` [PATCH v4 14/16] ASoC: SOF: amd: add alt_machines for ACP7.F SOF SoundWire Vijendar Mukunda
2026-10-30 9:45 ` [PATCH v4 15/16] ASoC: amd: acp: add SoundWire machine table for ACP7.B platform Vijendar Mukunda
2026-10-30 9:45 ` [PATCH v4 16/16] ASoC: SOF: amd: register SoundWire alt_machines for ACP7.B Vijendar Mukunda
2026-11-01 18:34 ` Pierre-Louis Bossart [this message]
2026-11-02 6:01 ` [PATCH v4 00/16] ASoC: amd: acp: ACP7.B/7.F SoundWire machine driver support Mukunda,Vijendar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3f3d7e4b-dd5a-4ef9-806e-5bc98a40d2d3@linux.dev \
--to=pierre-louis.bossart@linux.dev \
--cc=Basavaraj.Hiregoudar@amd.com \
--cc=Mario.Limonciello@amd.com \
--cc=Poojitha.N@amd.com \
--cc=Richard.Gong@amd.com \
--cc=Sunil-kumar.Dommati@amd.com \
--cc=Syed.SabaKareem@amd.com \
--cc=Vijendar.Mukunda@amd.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=sound-open-firmware@alsa-project.org \
--cc=tiwai@suse.com \
--cc=venkataprasad.potturu@amd.com \
--cc=yung-chuan.liao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®