From: Jaswinder Singh Rajput <jaswinderlinux@gmail.com>
To: Kernel Testers List <kernel-testers@vger.kernel.org>,
linux-kernel <linux-kernel@vger.kernel.org>,
"Rafael J. Wysocki" <rjw@sisk.pl>,
James Bottomley <James.Bottomley@hansenpartnership.com>
Subject: hdb: status error: error=0x40 <3>{ UncorrectableError }
Date: Mon, 26 Jan 2009 02:09:56 +0530 [thread overview]
Message-ID: <3f9a31f40901251239k3e368feeib33661d82497725b@mail.gmail.com> (raw)
Hello all,
I added extra IDE drive I get similar messages like below so I replace
it another drive but I am still getting similar error messages on
2.6.29-rc2-tip:
hdb: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: status error: error=0x40 <3>{ UncorrectableError },
LBAsect=208845, sector=0
ide: failed opcode was: unknown
end_request: I/O error, dev hdb, sector 0
Buffer I/O error on device hdb, logical block 0
hdb: drive not ready for command
hdb: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: status error: error=0x40 <3>{ UncorrectableError },
LBAsect=208845, sector=8
ide: failed opcode was: unknown
end_request: I/O error, dev hdb, sector 8
Buffer I/O error on device hdb, logical block 1
hdb: drive not ready for command
hdb: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: status error: error=0x40 <3>{ UncorrectableError },
LBAsect=208845, sector=16
ide: failed opcode was: unknown
end_request: I/O error, dev hdb, sector 16
Buffer I/O error on device hdb, logical block 2
hdb: drive not ready for command
hdb: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: status error: error=0x40 <3>{ UncorrectableError },
LBAsect=208845, sector=24
ide: failed opcode was: unknown
end_request: I/O error, dev hdb, sector 24
hdb: drive not ready for command
hdb: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: status error: error=0x40 <3>{ UncorrectableError },
LBAsect=208845, sector=0
ide: failed opcode was: unknown
end_request: I/O error, dev hdb, sector 0
hdb: drive not ready for command
hdb: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: status error: error=0x40 <3>{ UncorrectableError },
LBAsect=208845, sector=4294967295
ide: failed opcode was: 0xea
hdb: drive not ready for command
hdb: wcache flush failed!
hdb: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: status error: error=0x40 <3>{ UncorrectableError },
LBAsect=208845, sector=4294967295
ide: failed opcode was: 0xec
hdb: drive not ready for command
hdb: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: status error: error=0x40 <3>{ UncorrectableError },
LBAsect=208845, sector=4294967295
ide: failed opcode was: 0xa1
hdb: drive not ready for command
hdb: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: status error: error=0x40 <3>{ UncorrectableError },
LBAsect=208845, sector=4294967295
ide: failed opcode was: 0xea
hdb: drive not ready for command
hdb: wcache flush failed!
How can I fix these error.
Thanks,
--
JSR
next reply other threads:[~2009-01-25 20:40 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-25 20:39 Jaswinder Singh Rajput [this message]
2009-01-25 20:46 ` Alan Cox
2009-01-25 21:01 ` Bill Davidsen
2009-01-25 21:10 ` Jaswinder Singh Rajput
2009-01-25 21:49 ` Bartlomiej Zolnierkiewicz
2009-01-25 21:55 ` Bartlomiej Zolnierkiewicz
[not found] ` <3f9a31f40901252031l3bb0ec39nd077ff8f13df73bd@mail.gmail.com>
2009-01-26 5:30 ` Jaswinder Singh
2009-01-26 5:40 ` Jaswinder Singh
2009-01-26 8:43 ` Jaswinder Singh Rajput
[not found] ` <D4601E4C-56E9-4701-A36B-0E07A7437381@usgs.gov>
2009-01-26 6:39 ` [Rocks-Discuss] " Jaswinder Singh Rajput
[not found] ` <A2A0D2B1-F9AB-4CB2-AFB1-F341ADBAB959@usgs.gov>
2009-01-26 12:02 ` Alan Cox
2009-01-25 20:46 ` strawks
2009-01-25 21:02 ` Jaswinder Singh Rajput
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3f9a31f40901251239k3e368feeib33661d82497725b@mail.gmail.com \
--to=jaswinderlinux@gmail.com \
--cc=James.Bottomley@hansenpartnership.com \
--cc=kernel-testers@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rjw@sisk.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®