Re: [PATCH] serial: 8250_dw: retain programmed timing for BUSY waits

["Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>]

On Mon, 12 Oct 2026, khaliforce wrote:

> Baud changes update frame_time before the programmed divisor changes.

Why not fix this problem instead? It would seem wrong to have wrong value 
in ->frame_time.

--
 i.

> A switch to a faster baud rate therefore shortens the DesignWare BUSY
> wait.
> The wait can expire while a frame at the old baud rate remains active.
> 
> Use the programmed frame duration for FIFO and BUSY waits.
> Account for UART clock changes.
> 
> Fixes: a7b9ce39fbe4 ("serial: 8250_dw: Ensure BUSY is deasserted")
> Signed-off-by: khaliforce <kforce@gmail.com>
> ---
> Compared the complete patch off/on on MangoPi MQ Pro UART0.
> Kept other port patches, kernel options and DTB identical.
> Tested BUSY changes from 9600, 1200 and 300 to 115200.
> All 11 paired changes fail without the patch and pass with it.
> Each trial returns 64 matching loopback bytes.
> 
>  drivers/tty/serial/8250/8250_dw.c    | 20 ++++++++++++++++++--
>  drivers/tty/serial/8250/8250_dwlib.c |  4 ++++
>  drivers/tty/serial/8250/8250_dwlib.h |  4 ++++
>  3 files changed, 26 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
> index 51d026f20825..03be503bcef0 100644
> --- a/drivers/tty/serial/8250/8250_dw.c
> +++ b/drivers/tty/serial/8250/8250_dw.c
> @@ -17,6 +17,8 @@
>  #include <linux/device.h>
>  #include <linux/io.h>
>  #include <linux/lockdep.h>
> +#include <linux/math64.h>
> +#include <linux/minmax.h>
>  #include <linux/module.h>
>  #include <linux/platform_device.h>
>  #include <linux/pm_runtime.h>
> @@ -131,6 +133,9 @@ static int dw8250_idle_enter(struct uart_port *p)
>  	struct dw8250_data *d = to_dw8250_data(p->private_data);
>  	unsigned int usr_reg = d->pdata ? d->pdata->usr_reg : DW_UART_USR;
>  	struct uart_8250_port *up = up_to_u8250p(p);
> +	unsigned int frame_time = d->data.frame_time ?: p->frame_time;
> +	unsigned int saved_frame_time = p->frame_time;
> +	u64 scaled_frame_time;
>  	int retries;
>  	u32 lsr;
>  
> @@ -139,6 +144,12 @@ static int dw8250_idle_enter(struct uart_port *p)
>  	if (d->uart_16550_compatible)
>  		return 0;
>  
> +	if (d->data.frame_time && d->data.frame_time_uartclk && p->uartclk) {
> +		scaled_frame_time = (u64)frame_time * d->data.frame_time_uartclk;
> +		scaled_frame_time = DIV_ROUND_UP_ULL(scaled_frame_time, p->uartclk);
> +		frame_time = min_t(u64, scaled_frame_time, U32_MAX);
> +	}
> +
>  	d->in_idle = 1;
>  
>  	/* Prevent triggering interrupt from RBR filling */
> @@ -156,8 +167,10 @@ static int dw8250_idle_enter(struct uart_port *p)
>  	 *
>  	 * FIXME: frame_time delay is too long with very low baudrates.
>  	 */
> +	p->frame_time = frame_time;
>  	serial8250_fifo_wait_for_lsr_thre(up, NULL, p->fifosize);
> -	ndelay(p->frame_time);
> +	p->frame_time = saved_frame_time;
> +	ndelay(frame_time);
>  
>  	serial_port_out(p, UART_MCR, up->mcr | UART_MCR_LOOP);
>  
> @@ -167,7 +180,7 @@ static int dw8250_idle_enter(struct uart_port *p)
>  		if (!(serial_port_in(p, usr_reg) & DW_UART_USR_BUSY))
>  			break;
>  		/* FIXME: frame_time delay is too long with very low baudrates. */
> -		ndelay(p->frame_time);
> +		ndelay(frame_time);
>  	} while (--retries);
>  
>  	lsr = serial_lsr_in(up);
> @@ -188,6 +201,7 @@ static int dw8250_idle_enter(struct uart_port *p)
>  static void dw8250_set_divisor(struct uart_port *p, unsigned int baud,
>  			       unsigned int quot, unsigned int quot_frac)
>  {
> +	struct dw8250_port_data *d = p->private_data;
>  	struct uart_8250_port *up = up_to_u8250p(p);
>  	int ret;
>  
> @@ -200,6 +214,8 @@ static void dw8250_set_divisor(struct uart_port *p, unsigned int baud,
>  		goto idle_failed;
>  
>  	serial_dl_write(up, quot);
> +	d->frame_time = p->frame_time;
> +	d->frame_time_uartclk = p->uartclk;
>  	serial_port_out(p, UART_LCR, up->lcr);
>  
>  idle_failed:
> diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c
> index 8859e66d2d71..d74ff203f904 100644
> --- a/drivers/tty/serial/8250/8250_dwlib.c
> +++ b/drivers/tty/serial/8250/8250_dwlib.c
> @@ -39,8 +39,12 @@ static unsigned int dw8250_get_divisor(struct uart_port *p, unsigned int baud,
>  static void dw8250_set_divisor(struct uart_port *p, unsigned int baud,
>  			       unsigned int quot, unsigned int quot_frac)
>  {
> +	struct dw8250_port_data *d = p->private_data;
> +
>  	dw8250_writel_ext(p, DW_UART_DLF, quot_frac);
>  	serial8250_do_set_divisor(p, baud, quot);
> +	d->frame_time = p->frame_time;
> +	d->frame_time_uartclk = p->uartclk;
>  }
>  
>  void dw8250_do_set_termios(struct uart_port *p, struct ktermios *termios,
> diff --git a/drivers/tty/serial/8250/8250_dwlib.h b/drivers/tty/serial/8250/8250_dwlib.h
> index 1fe52332e774..5472c13ca92e 100644
> --- a/drivers/tty/serial/8250/8250_dwlib.h
> +++ b/drivers/tty/serial/8250/8250_dwlib.h
> @@ -88,6 +88,10 @@ struct dw8250_port_data {
>  	u32			cpr_value;
>  	u8			dlf_size;
>  
> +	/* Timing for the programmed divisor. */
> +	u32			frame_time;
> +	u32			frame_time_uartclk;
> +
>  	/* RS485 variables */
>  	bool			hw_rs485_support;
>  };
>