mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
To: Andrzej Hajda <a.hajda@samsung.com>
Cc: linux-fbdev@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 3/3] video: fbdev: mmp: fix sparse warnings about using incorrect types
Date: Fri, 3 Jan 2020 12:39:06 +0100	[thread overview]
Message-ID: <3fb650f8-1201-78ce-81f0-2039eb584bd1@samsung.com> (raw)
In-Reply-To: <bb23a213-e86f-8057-566d-926c1b5eb10b@samsung.com>


On 8/20/19 1:07 PM, Andrzej Hajda wrote:
> On 27.06.2019 16:08, Bartlomiej Zolnierkiewicz wrote:
>> Use ->screen_buffer instead of ->screen_base in mmpfb driver.
>>
>> [ Please see commit 17a7b0b4d974 ("fb.h: Provide alternate screen_base
>>   pointer") for details. ]
>>
>> Also fix all other sparse warnings about using incorrect types in
>> mmp display subsystem.
>>
>> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> 
> 
> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>

Thanks, I've queued the patch for v5.6.

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

>  --
> Regards
> Andrzej
> 
> 
>> ---
>>  drivers/video/fbdev/mmp/fb/mmpfb.c    |    2 -
>>  drivers/video/fbdev/mmp/hw/mmp_ctrl.c |   55 +++++++++++++++++++---------------
>>  drivers/video/fbdev/mmp/hw/mmp_ctrl.h |   10 +++---
>>  drivers/video/fbdev/mmp/hw/mmp_spi.c  |    6 +--
>>  4 files changed, 41 insertions(+), 32 deletions(-)
>>
>> Index: b/drivers/video/fbdev/mmp/fb/mmpfb.c
>> ===================================================================
>> --- a/drivers/video/fbdev/mmp/fb/mmpfb.c
>> +++ b/drivers/video/fbdev/mmp/fb/mmpfb.c
>> @@ -522,7 +522,7 @@ static int fb_info_setup(struct fb_info
>>  		info->var.bits_per_pixel / 8;
>>  	info->fbops = &mmpfb_ops;
>>  	info->pseudo_palette = fbi->pseudo_palette;
>> -	info->screen_base = fbi->fb_start;
>> +	info->screen_buffer = fbi->fb_start;
>>  	info->screen_size = fbi->fb_size;
>>  
>>  	/* For FB framework: Allocate color map and Register framebuffer*/
>> Index: b/drivers/video/fbdev/mmp/hw/mmp_ctrl.c
>> ===================================================================
>> --- a/drivers/video/fbdev/mmp/hw/mmp_ctrl.c
>> +++ b/drivers/video/fbdev/mmp/hw/mmp_ctrl.c
>> @@ -136,19 +136,26 @@ static void overlay_set_win(struct mmp_o
>>  	mutex_lock(&overlay->access_ok);
>>  
>>  	if (overlay_is_vid(overlay)) {
>> -		writel_relaxed(win->pitch[0], &regs->v_pitch_yc);
>> -		writel_relaxed(win->pitch[2] << 16 |
>> -				win->pitch[1], &regs->v_pitch_uv);
>> -
>> -		writel_relaxed((win->ysrc << 16) | win->xsrc, &regs->v_size);
>> -		writel_relaxed((win->ydst << 16) | win->xdst, &regs->v_size_z);
>> -		writel_relaxed(win->ypos << 16 | win->xpos, &regs->v_start);
>> +		writel_relaxed(win->pitch[0],
>> +				(void __iomem *)&regs->v_pitch_yc);
>> +		writel_relaxed(win->pitch[2] << 16 | win->pitch[1],
>> +				(void __iomem *)&regs->v_pitch_uv);
>> +
>> +		writel_relaxed((win->ysrc << 16) | win->xsrc,
>> +				(void __iomem *)&regs->v_size);
>> +		writel_relaxed((win->ydst << 16) | win->xdst,
>> +				(void __iomem *)&regs->v_size_z);
>> +		writel_relaxed(win->ypos << 16 | win->xpos,
>> +				(void __iomem *)&regs->v_start);
>>  	} else {
>> -		writel_relaxed(win->pitch[0], &regs->g_pitch);
>> +		writel_relaxed(win->pitch[0], (void __iomem *)&regs->g_pitch);
>>  
>> -		writel_relaxed((win->ysrc << 16) | win->xsrc, &regs->g_size);
>> -		writel_relaxed((win->ydst << 16) | win->xdst, &regs->g_size_z);
>> -		writel_relaxed(win->ypos << 16 | win->xpos, &regs->g_start);
>> +		writel_relaxed((win->ysrc << 16) | win->xsrc,
>> +				(void __iomem *)&regs->g_size);
>> +		writel_relaxed((win->ydst << 16) | win->xdst,
>> +				(void __iomem *)&regs->g_size_z);
>> +		writel_relaxed(win->ypos << 16 | win->xpos,
>> +				(void __iomem *)&regs->g_start);
>>  	}
>>  
>>  	dmafetch_set_fmt(overlay);
>> @@ -233,11 +240,11 @@ static int overlay_set_addr(struct mmp_o
>>  	memcpy(&overlay->addr, addr, sizeof(struct mmp_addr));
>>  
>>  	if (overlay_is_vid(overlay)) {
>> -		writel_relaxed(addr->phys[0], &regs->v_y0);
>> -		writel_relaxed(addr->phys[1], &regs->v_u0);
>> -		writel_relaxed(addr->phys[2], &regs->v_v0);
>> +		writel_relaxed(addr->phys[0], (void __iomem *)&regs->v_y0);
>> +		writel_relaxed(addr->phys[1], (void __iomem *)&regs->v_u0);
>> +		writel_relaxed(addr->phys[2], (void __iomem *)&regs->v_v0);
>>  	} else
>> -		writel_relaxed(addr->phys[0], &regs->g_0);
>> +		writel_relaxed(addr->phys[0], (void __iomem *)&regs->g_0);
>>  
>>  	return overlay->addr.phys[0];
>>  }
>> @@ -268,16 +275,18 @@ static void path_set_mode(struct mmp_pat
>>  	tmp |= dsi_rbswap & CFG_INTFRBSWAP_MASK;
>>  	writel_relaxed(tmp, ctrl_regs(path) + intf_rbswap_ctrl(path->id));
>>  
>> -	writel_relaxed((mode->yres << 16) | mode->xres, &regs->screen_active);
>> +	writel_relaxed((mode->yres << 16) | mode->xres,
>> +		(void __iomem *)&regs->screen_active);
>>  	writel_relaxed((mode->left_margin << 16) | mode->right_margin,
>> -		&regs->screen_h_porch);
>> +		(void __iomem *)&regs->screen_h_porch);
>>  	writel_relaxed((mode->upper_margin << 16) | mode->lower_margin,
>> -		&regs->screen_v_porch);
>> +		(void __iomem *)&regs->screen_v_porch);
>>  	total_x = mode->xres + mode->left_margin + mode->right_margin +
>>  		mode->hsync_len;
>>  	total_y = mode->yres + mode->upper_margin + mode->lower_margin +
>>  		mode->vsync_len;
>> -	writel_relaxed((total_y << 16) | total_x, &regs->screen_size);
>> +	writel_relaxed((total_y << 16) | total_x,
>> +		(void __iomem *)&regs->screen_size);
>>  
>>  	/* vsync ctrl */
>>  	if (path->output_type == PATH_OUT_DSI)
>> @@ -285,7 +294,7 @@ static void path_set_mode(struct mmp_pat
>>  	else
>>  		vsync_ctrl = ((mode->xres + mode->right_margin) << 16)
>>  					| (mode->xres + mode->right_margin);
>> -	writel_relaxed(vsync_ctrl, &regs->vsync_ctrl);
>> +	writel_relaxed(vsync_ctrl, (void __iomem *)&regs->vsync_ctrl);
>>  
>>  	/* set pixclock div */
>>  	sclk_src = clk_get_rate(path_to_ctrl(path)->clk);
>> @@ -366,9 +375,9 @@ static void path_set_default(struct mmp_
>>  	writel_relaxed(dma_ctrl1, ctrl_regs(path) + dma_ctrl(1, path->id));
>>  
>>  	/* Configure default register values */
>> -	writel_relaxed(0x00000000, &regs->blank_color);
>> -	writel_relaxed(0x00000000, &regs->g_1);
>> -	writel_relaxed(0x00000000, &regs->g_start);
>> +	writel_relaxed(0x00000000, (void __iomem *)&regs->blank_color);
>> +	writel_relaxed(0x00000000, (void __iomem *)&regs->g_1);
>> +	writel_relaxed(0x00000000, (void __iomem *)&regs->g_start);
>>  
>>  	/*
>>  	 * 1.enable multiple burst request in DMA AXI
>> Index: b/drivers/video/fbdev/mmp/hw/mmp_ctrl.h
>> ===================================================================
>> --- a/drivers/video/fbdev/mmp/hw/mmp_ctrl.h
>> +++ b/drivers/video/fbdev/mmp/hw/mmp_ctrl.h
>> @@ -1393,7 +1393,7 @@ struct mmphw_ctrl {
>>  	/* platform related, get from config */
>>  	const char *name;
>>  	int irq;
>> -	void *reg_base;
>> +	void __iomem *reg_base;
>>  	struct clk *clk;
>>  
>>  	/* sys info */
>> @@ -1429,7 +1429,7 @@ static inline struct mmphw_ctrl *overlay
>>  	return path_to_ctrl(overlay->path);
>>  }
>>  
>> -static inline void *ctrl_regs(struct mmp_path *path)
>> +static inline void __iomem *ctrl_regs(struct mmp_path *path)
>>  {
>>  	return path_to_ctrl(path)->reg_base;
>>  }
>> @@ -1438,11 +1438,11 @@ static inline void *ctrl_regs(struct mmp
>>  static inline struct lcd_regs *path_regs(struct mmp_path *path)
>>  {
>>  	if (path->id == PATH_PN)
>> -		return (struct lcd_regs *)(ctrl_regs(path) + 0xc0);
>> +		return (struct lcd_regs __force *)(ctrl_regs(path) + 0xc0);
>>  	else if (path->id == PATH_TV)
>> -		return (struct lcd_regs *)ctrl_regs(path);
>> +		return (struct lcd_regs __force  *)ctrl_regs(path);
>>  	else if (path->id == PATH_P2)
>> -		return (struct lcd_regs *)(ctrl_regs(path) + 0x200);
>> +		return (struct lcd_regs __force *)(ctrl_regs(path) + 0x200);
>>  	else {
>>  		dev_err(path->dev, "path id %d invalid\n", path->id);
>>  		BUG_ON(1);
>> Index: b/drivers/video/fbdev/mmp/hw/mmp_spi.c
>> ===================================================================
>> --- a/drivers/video/fbdev/mmp/hw/mmp_spi.c
>> +++ b/drivers/video/fbdev/mmp/hw/mmp_spi.c
>> @@ -31,7 +31,7 @@ static inline int lcd_spi_write(struct s
>>  {
>>  	int timeout = 100000, isr, ret = 0;
>>  	u32 tmp;
>> -	void *reg_base =
>> +	void __iomem *reg_base = (void __iomem *)
>>  		*(void **)spi_master_get_devdata(spi->master);
>>  
>>  	/* clear ISR */
>> @@ -80,7 +80,7 @@ static inline int lcd_spi_write(struct s
>>  
>>  static int lcd_spi_setup(struct spi_device *spi)
>>  {
>> -	void *reg_base =
>> +	void __iomem *reg_base = (void __iomem *)
>>  		*(void **)spi_master_get_devdata(spi->master);
>>  	u32 tmp;
>>  
>> @@ -146,7 +146,7 @@ int lcd_spi_register(struct mmphw_ctrl *
>>  		return -ENOMEM;
>>  	}
>>  	p_regbase = spi_master_get_devdata(master);
>> -	*p_regbase = ctrl->reg_base;
>> +	*p_regbase = (void __force *)ctrl->reg_base;
>>  
>>  	/* set bus num to 5 to avoid conflict with other spi hosts */
>>  	master->bus_num = 5;
>>
>> _______________________________________________
>> dri-devel mailing list
>> dri-devel@lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/dri-devel

      reply	other threads:[~2020-01-03 11:39 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20190627140844eucas1p1fac4e639a3445c6ae1a51b0743289f1c@eucas1p1.samsung.com>
2019-06-27 14:08 ` Bartlomiej Zolnierkiewicz
2019-08-20 11:07   ` Andrzej Hajda
2020-01-03 11:39     ` Bartlomiej Zolnierkiewicz [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3fb650f8-1201-78ce-81f0-2039eb584bd1@samsung.com \
    --to=b.zolnierkie@samsung.com \
    --cc=a.hajda@samsung.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®