mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Limonciello, Mario" <mario.limonciello@amd.com>
To: Akihiko Odaki <akihiko.odaki@gmail.com>
Cc: Basavaraj Natikar <basavaraj.natikar@amd.com>,
	Jiri Kosina <jikos@kernel.org>,
	Benjamin Tissoires <benjamin.tissoires@redhat.com>,
	linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] HID: amd_sfh: Ignore uninitialized device
Date: Tue, 28 Jun 2022 10:14:26 -0500	[thread overview]
Message-ID: <3ff059d8-2d89-6ea1-209b-3c8855561acb@amd.com> (raw)
In-Reply-To: <8c95e3d7-cff6-c56e-e197-fdd0911d81aa@gmail.com>

On 6/28/2022 10:11, Akihiko Odaki wrote:
> On 2022/06/28 23:42, Limonciello, Mario wrote:
>> On 6/26/2022 03:13, Akihiko Odaki wrote:
>>> Lenovo ThinkPad C13 Yoga has AMD Sensor Fusion Hub, but it is not used
>>> because Chrome OS EC Sensor Hub is used instead. The system therefore
>>> never loads the firmware for MP2 and MP2 does not work. It results in
>>> AMD_P2C_MSG3 register to have -1 as its value.
>>>
>>> Without this change, the driver interprets the value as it supports all
>>> sensor types and exposes them, which confuses a userspace program,
>>> iio-sensor-proxy, and makes it to use the non-functioning sensors
>>> instead of functioning sensors exposed via Chrome OS EC Sensor Hub.
>>>
>>> Check the version bits included in AMD_P2C_MSG3 register and ignore the
>>> device if all of the bits are set.
>>>
>>
>> Have you already confirmed this failure happens in 5.19-rc1 or later 
>> as well?  I would think that b5d7f43e97dabfa04a4be5ff027ce7da119332be 
>> should have fixed it.
> 
> Yes. I confirmed it with 78ca55889a549a9a194c6ec666836329b774ab6d.
> 

Thanks for confirming.

> b5d7f43e97dabfa04a4be5ff027ce7da119332be deals with the case where it 
> advertises v2 but it doesn't in my case.

In your case it actually goes down the v1 ops path then right?

Basavaraj - is discovery unique to v2?  Or does it also exist for v1?
If it also exists for v1 I think that's a cleaner solution.

> 
> Regards,
> Akihiko Odaki
> 
>>
>>> Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
>>> ---
>>>   drivers/hid/amd-sfh-hid/amd_sfh_pcie.c | 4 ++++
>>>   1 file changed, 4 insertions(+)
>>>
>>> diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c 
>>> b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c
>>> index dadc491bbf6b..4137e5da77ad 100644
>>> --- a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c
>>> +++ b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c
>>> @@ -271,6 +271,8 @@ static void mp2_select_ops(struct amd_mp2_dev 
>>> *privdata)
>>>       case V2_STATUS:
>>>           privdata->mp2_ops = &amd_sfh_ops_v2;
>>>           break;
>>> +    case 15:
>>> +        break;
>>>       default:
>>>           privdata->mp2_ops = &amd_sfh_ops;
>>>           break;
>>> @@ -317,6 +319,8 @@ static int amd_mp2_pci_probe(struct pci_dev 
>>> *pdev, const struct pci_device_id *i
>>>           return -ENOMEM;
>>>       mp2_select_ops(privdata);
>>> +    if (!privdata->mp2_ops)
>>> +        return -ENODEV;
>>>       rc = amd_sfh_irq_init(privdata);
>>>       if (rc) {
>>
> 


  reply	other threads:[~2022-06-28 15:14 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-26  8:13 Akihiko Odaki
2022-06-28 14:42 ` Limonciello, Mario
2022-06-28 15:11   ` Akihiko Odaki
2022-06-28 15:14     ` Limonciello, Mario [this message]
2022-06-28 15:21       ` Akihiko Odaki
2022-07-07 18:19         ` Limonciello, Mario

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3ff059d8-2d89-6ea1-209b-3c8855561acb@amd.com \
    --to=mario.limonciello@amd.com \
    --cc=akihiko.odaki@gmail.com \
    --cc=basavaraj.natikar@amd.com \
    --cc=benjamin.tissoires@redhat.com \
    --cc=jikos@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®