From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S265744AbUBKTzj (ORCPT ); Wed, 11 Feb 2004 14:55:39 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S265748AbUBKTzj (ORCPT ); Wed, 11 Feb 2004 14:55:39 -0500 Received: from smtp0.libero.it ([193.70.192.33]:48092 "EHLO smtp0.libero.it") by vger.kernel.org with ESMTP id S265744AbUBKTz0 (ORCPT ); Wed, 11 Feb 2004 14:55:26 -0500 Message-ID: <402A88A6.4000704@surricani.cjb.net> Date: Wed, 11 Feb 2004 20:55:18 +0100 From: "Dott. Surricani" User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.6) Gecko/20040113 X-Accept-Language: it, en-us, en MIME-Version: 1.0 To: linux-kernel@vger.kernel.org Subject: Oops with SAtA siimage module Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org When i try to load the Silicon 3dimage moule i get this: Linux version 2.6.2 (root@surricani) (gcc version 2.95.3 20010315 (release)) #14 Wed Feb 11 20:28:59 CET 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) user-defined physical RAM map: user: 0000000000000000 - 000000000009fc00 (usable) user: 000000000009fc00 - 00000000000a0000 (reserved) user: 00000000000f0000 - 0000000000100000 (reserved) user: 0000000000100000 - 000000003fff0000 (usable) 127MB HIGHMEM available. 896MB LOWMEM available. On node 0 totalpages: 262128 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 32752 pages, LIFO batch:7 DMI 2.2 present. ACPI: RSDP (v000 Nvidia ) @ 0x000f6b80 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff79c0 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:10 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 2 IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, IRQ 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI BALANCE SET Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Building zonelist for node : 0 Kernel command line: mem=1048512K Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 1904.182 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Memory: 1034036k/1048512k available (843k kernel code, 13568k reserved, 342k data, 108k init, 131008k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 3768.32 BogoMIPS Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 1690k freed CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... failed. ...trying to set up timer as Virtual Wire IRQ... failed. ...trying to set up timer as ExtINT IRQ... works. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1904.0029 MHz. ..... host bus clock speed is 400.0848 MHz. Linux NoNET1.0 for Linux 2.6 PCI: PCI BIOS revision 2.10 entry at 0xfb420, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040116 IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9 Mode:1 Active:0) ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) ACPI: PCI Interrupt Link [APC2] (IRQs 17) ACPI: PCI Interrupt Link [APC3] (IRQs *18) ACPI: PCI Interrupt Link [APC4] (IRQs *19) ACPI: PCI Interrupt Link [APCE] (IRQs 16) ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) ACPI: PCI Interrupt Link [APCS] (IRQs *23) ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) ACPI: PCI Interrupt Link [APCS] enabled at IRQ 23 IOAPIC[0]: Set PCI routing entry (2-23 -> 0xa9 -> IRQ 23 Mode:1 Active:0) 00:00:01[A] -> 2-23 -> IRQ 169 Pin 2-23 already programmed ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 IOAPIC[0]: Set PCI routing entry (2-20 -> 0xb1 -> IRQ 20 Mode:1 Active:0) 00:00:02[A] -> 2-20 -> IRQ 177 ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22 IOAPIC[0]: Set PCI routing entry (2-22 -> 0xb9 -> IRQ 22 Mode:1 Active:0) 00:00:02[B] -> 2-22 -> IRQ 185 ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 IOAPIC[0]: Set PCI routing entry (2-21 -> 0xc1 -> IRQ 21 Mode:1 Active:0) 00:00:02[C] -> 2-21 -> IRQ 193 ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 Pin 2-20 already programmed ACPI: PCI Interrupt Link [APCI] enabled at IRQ 22 Pin 2-22 already programmed ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21 Pin 2-21 already programmed ACPI: PCI Interrupt Link [APCK] enabled at IRQ 20 Pin 2-20 already programmed ACPI: PCI Interrupt Link [APCM] enabled at IRQ 22 Pin 2-22 already programmed ACPI: PCI Interrupt Link [AP3C] enabled at IRQ 21 Pin 2-21 already programmed ACPI: PCI Interrupt Link [APCZ] enabled at IRQ 20 Pin 2-20 already programmed ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 IOAPIC[0]: Set PCI routing entry (2-18 -> 0xc9 -> IRQ 18 Mode:1 Active:0) 00:01:06[A] -> 2-18 -> IRQ 201 ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 IOAPIC[0]: Set PCI routing entry (2-19 -> 0xd1 -> IRQ 19 Mode:1 Active:0) 00:01:06[B] -> 2-19 -> IRQ 209 ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 IOAPIC[0]: Set PCI routing entry (2-16 -> 0xd9 -> IRQ 16 Mode:1 Active:0) 00:01:06[C] -> 2-16 -> IRQ 217 ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 IOAPIC[0]: Set PCI routing entry (2-17 -> 0xe1 -> IRQ 17 Mode:1 Active:0) 00:01:06[D] -> 2-17 -> IRQ 225 Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-18 already programmed Pin 2-18 already programmed Pin 2-18 already programmed Pin 2-19 already programmed number of MP IRQ sources: 15. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 000 00 1 0 0 0 0 0 0 00 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 1 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 0 1 0 0 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 001 01 1 1 0 0 0 1 1 D9 11 001 01 1 1 0 0 0 1 1 E1 12 001 01 1 1 0 0 0 1 1 C9 13 001 01 1 1 0 0 0 1 1 D1 14 001 01 1 1 0 0 0 1 1 B1 15 001 01 1 1 0 0 0 1 1 C1 16 001 01 1 1 0 0 0 1 1 B9 17 001 01 1 1 0 0 0 1 1 A9 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9-> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ20 -> 0:20 IRQ21 -> 0:21 IRQ22 -> 0:22 IRQ23 -> 0:23 .................................... done. PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Machine check exception polling timer started. highmem bounce pool size: 64 pages pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). ACPI: Processor [CPU0] (supports C1) ACPI: Thermal Zone [THRM] (40 C) ACPI: Fan [FAN] (on) Real Time Clock Driver v1.12 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE2: IDE controller at PCI slot 0000:00:09.0 NFORCE2: chipset revision 162 NFORCE2: not 100% native mode: will probe irqs later NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA hda: Maxtor 6Y080L0, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: LITE-ON LTR-52327S, ATAPI CD/DVD-ROM drive hdd: HL-DT-STDVD-ROM GDR8161B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Module amd74xx cannot be unloaded due to unsafe usage in include/linux/module.h:489 SiI3112 Serial ATA: IDE controller at PCI slot 0000:01:0b.0 SiI3112 Serial ATA: chipset revision 2 Unable to handle kernel paging request at virtual address 868b502e printing eip: f884e8b5 *pde = 00000000 Oops: 0000 [#1] CPU: 0 EIP: 0060:[] Not tainted EFLAGS: 00010286 EIP is at ide_pci_register_host_proc+0x25/0x40 [ide_core] eax: 868b501e ebx: f880c00d ecx: 00070000 edx: f882565c esi: f7e5c000 edi: e3000000 ebp: f7e5c000 esp: f7a21e4c ds: 007b es: 007b ss: 0068 Process insmod (pid: 17, threadinfo=f7a20000 task=f7a23980) Stack: f882206b f882565c f880c000 00000200 f882220f f7e5c000 0000000d f8822413 000000c9 f7e5c000 f8822413 f7a21ee0 f882508f f7e5c000 f8822413 000000c9 f8823298 00000001 c000be89 00000002 f884bf45 f7e5c000 f8822413 f7e5c000 Call Trace: [] proc_reports_siimage+0x9b/0xb0 [siimage] [] setup_mmio_siimage+0x18f/0x1a0 [siimage] [] init_chipset_siimage+0x8f/0x280 [siimage] [] do_ide_setup_pci_device+0x105/0x160 [ide_core] [] ide_setup_pci_device+0x1a/0x70 [ide_core] [] siimage_init_one+0x37/0xa0 [siimage] [] pci_device_probe_static+0x2c/0x50 [] __pci_device_probe+0x1f/0x40 [] pci_device_probe+0x1c/0x40 [] bus_match+0x31/0x60 [] driver_attach+0x40/0x80 [] bus_add_driver+0x6b/0x90 [] driver_register+0x34/0x40 [] pci_register_driver+0x54/0x80 [] ide_pci_register_driver+0x36/0x50 [ide_core] [] siimage_ide_init+0xa/0x10 [siimage] [] sys_init_module+0xf4/0x200 [] syscall_call+0x7/0xb Code: 83 78 10 00 75 f7 89 50 10 c3 90 89 15 54 04 86 f8 c3 89 f6 hda: max request size: 128KiB hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133) hda: hda1 hda2 hda3 hda4 device-mapper: 4.0.0-ioctl (2003-06-04) initialised: dm@uk.sistina.com SCSI subsystem initialized SGI XFS with no debug enabled XFS mounting filesystem hda2 Ending clean XFS mount for filesystem: hda2 VFS: Mounted root (xfs filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 108k freed XFS mounting filesystem hda4 Ending clean XFS mount for filesystem: hda4