From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261897AbUBWJ0o (ORCPT ); Mon, 23 Feb 2004 04:26:44 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261899AbUBWJ0o (ORCPT ); Mon, 23 Feb 2004 04:26:44 -0500 Received: from smtp.vnoc.murphx.net ([217.148.32.26]:9199 "HELO mail-srv0.cluster.vnoc.murphx.net") by vger.kernel.org with SMTP id S261897AbUBWJ0k (ORCPT ); Mon, 23 Feb 2004 04:26:40 -0500 Message-ID: <4039C868.4040609@gadsdon.giointernet.co.uk> Date: Mon, 23 Feb 2004 09:31:20 +0000 From: Robert Gadsdon User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.7a) Gecko/20040223 X-Accept-Language: en-gb, en, en-us MIME-Version: 1.0 To: Greg KH CC: linux kernel , Linux-USB Subject: Re: 2.6.x support for prism2 USB wireless adapter? References: <40395346.3040300@gadsdon.giointernet.co.uk> <20040223020230.GA14833@kroah.com> In-Reply-To: <20040223020230.GA14833@kroah.com> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org The prism2_usb driver is from the linux-wlan-ng project at http://www.linux-wlan.com/linux-wlan/index.html#Download This driver driver compiles OK under 2.6.3 and loads, but the problem is that the device is not recognised by the USB kernel subsystem before that.. Under 2.4.23 (and without loading the prism2_usb driver) I get the following output from #lsusb: Bus 001 Device 001: ID 0000:0000 Bus 001 Device 002: ID 066b:2212 Linksys, Inc. WUSB11v2.5 802.11b Adapter Under 2.6.3 I get: Bus 001 Device 001: ID 0000:0000 Robert Gadsdon Greg KH wrote: > On Mon, Feb 23, 2004 at 01:11:34AM +0000, Robert Gadsdon wrote: > >>I had my Linksys prism2 USB wireless adapter (WUSB11 v2.5) working >>reasonably well with kernel 2.4.23, but with kernel 2.6.3 (and udev 018) >>I get: >> >>usb 1-1: new full speed USB device using address 5 >>drivers/usb/core/config.c: invalid interface number (1/1) >>usb 1-1: can't read configurations, error -22 >> >>#modprobe prism2_usb gives: >>prism2usb_init: prism2_usb.o: 0.2.1-pre20 Loaded >>prism2usb_init: dev_info is: prism2_usb >>drivers/usb/core/usb.c: registered new driver prism2_usb >> >>#lsusb does not show the device at all... >> >>Is this still 'work in progress'? > > > I don't see this driver in the kernel tree. Where did you find it? > > thanks, > > greg k-h > > -- .................................. Robert Gadsdon 01442 872 633 rgadsdon2@netscape.net ..................................