I have this message two times as I have two adaptec controllers...

Attached my .config and the dmesg output

ksymoops 2.4.9 on i686 2.6.5-rc1-mm2.  Options used
      -V (default)
      -k /proc/ksyms (default)
      -l /proc/modules (default)
      -o /lib/modules/2.6.5-rc1-mm2/ (default)
      -m /System.map (specified)

Error (regular_file): read_ksyms stat /proc/ksyms failed
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
CPU 0 irqstacks, hard=c05f7000 soft=c05f6000
Call Trace:
  [<c02b268d>] elv_requeue_request+0x8d/0xa0
  [<c02ede33>] scsi_request_fn+0x283/0x3b0
  [<c02b26d0>] __elv_add_request+0x30/0x50
  [<c02b4d09>] blk_insert_request+0xd9/0x100
  [<c02eca3a>] scsi_insert_special_req+0x3a/0x40
  [<c02ecc89>] scsi_wait_req+0x69/0xb0
  [<c02ecb90>] scsi_wait_done+0x0/0x90
  [<c02eeaeb>] scsi_probe_lun+0x7b/0x200
  [<c02ef0fc>] scsi_probe_and_add_lun+0xac/0x1d0
  [<c02ef864>] scsi_scan_target+0xa4/0x120
  [<c02ef95a>] scsi_scan_channel+0x7a/0x90
  [<c02efa31>] scsi_scan_host_selected+0xc1/0xd0
  [<c02efa6f>] scsi_scan_host+0x2f/0x40
  [<c030854c>] ahc_linux_register_host+0x27c/0x2f0
  [<c02afbdd>] bus_add_driver+0x8d/0xa0
  [<c02b001f>] driver_register+0x2f/0x40
  [<c02b001f>] driver_register+0x2f/0x40
  [<c0307383>] ahc_linux_detect+0x33/0x60
  [<c059c03f>] ahc_linux_init+0xf/0x30
  [<c057f80c>] do_initcalls+0x2c/0xc0
  [<c012e51f>] init_workqueues+0xf/0x30
  [<c01030a0>] init+0x0/0x160
  [<c01030d5>] init+0x35/0x160
  [<c010728c>] kernel_thread_helper+0x0/0x14
  [<c0107291>] kernel_thread_helper+0x5/0x14
Warning (Oops_read): Code line not seen, dumping what data is available


-- 
    __
   /  `                   	Eric Valette
  /--   __  o _.          	6 rue Paul Le Flem
(___, / (_(_(__         	35740 Pace

Tel: +33 (0)2 99 85 26 76	Fax: +33 (0)2 99 85 26 76
E-mail: eric.valette@free.fr