[...] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD8111: IDE controller at PCI slot 0000:00:07.1 AMD8111: chipset revision 3 AMD8111: not 100% native mode: will probe irqs later AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller ide0: BM-DMA at 0xb000-0xb007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xb008-0xb00f, BIOS settings: hdc:DMA, hdd:pio hda: IC35L080AVVA07-0, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: TOSHIBA DVD-ROM SD-M1612, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100) hda: hda1 hda2 < hda5 > hdc: ATAPI 48X DVD-ROM drive, 512kB Cache Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide mice: PS/2 mouse device common for all mice input: PC Speaker serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) NET: Registered protocol family 1 ACPI: (supports S0 S1 S3 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). found reiserfs format "3.6" with standard journal reiserfs: using ordered data mode Reiserfs journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hda1) for (hda1) Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 176k freed [...] SCSI subsystem initialized libata version 1.01 loaded. sata_promise version 0.91 pdc20621_dimm_init: Time Period Register (0x40): 0xffffffff pdc20621_dimm_init: Time Counter Register (0x44): 0xf0ef5b6b pdc20621_dimm_init: Num counters 0xf10a494 (252748948) pdc20621_dimm_init: 10 * Internal clk = 0x34a (842) pdc20621_dimm_init: 10 * Internal clk * 33 = 0x6c8a (27786) pdc20621_dimm_init: PLL F Param: 0x30 (48) pdc20621_dimm_init: pci_status: 0x8a301824 pdc20621_dimm_init: Local DIMM Speed = 100 pdc20621_dimm_init: Local DIMM Size = 128MB Local DIMM ECC Enabled 0, 0, 55, aa, Promise Not Yet Defined 1.1098 55, aa, Promise Not Yet Defined 1.1098 pdc20621_dimm_init: Start ECC initialization pdc20621_dimm_init: Finish ECC initialization ata_device_add: ENTER ata_host_add: ENTER ata_port_start: prd alloc, virt 000001000047e000, dma 47e000 ata1: SATA max UDMA/133 cmd 0xFFFFFF0000280200 ctl 0xFFFFFF0000280238 bmdma 0x0 irq 19 ata_host_add: ENTER ata_thread_iter: ata1: thr_state THR_PROBE_START ata_port_start: prd alloc, virt 000001000000c000, dma c000 ata2: SATA max UDMA/133 cmd 0xFFFFFF0000280280 ctl 0xFFFFFF00002802B8 bmdma 0x0 irq 19 ata_host_add: ENTER ata_thread_iter: ata2: thr_state THR_PROBE_START ata_port_start: prd alloc, virt 000001000000f000, dma f000 ata3: SATA max UDMA/133 cmd 0xFFFFFF0000280300 ctl 0xFFFFFF0000280338 bmdma 0x0 irq 19 ata_host_add: ENTER ata_thread_iter: ata3: thr_state THR_PROBE_START ata_port_start: prd alloc, virt 000001000045b000, dma 45b000 ata4: SATA max UDMA/133 cmd 0xFFFFFF0000280380 ctl 0xFFFFFF00002803B8 bmdma 0x0 irq 19 ata_device_add: probe begin ata_device_add: ata1: probe begin ata_device_add: ata1: probe-wait begin ata_thread_iter: ata4: thr_state THR_PROBE_START ata_thread_iter: ata1: new thr_state THR_PORT_RESET, returning 0 ata_thread_iter: ata1: thr_state THR_PORT_RESET pdc_20621_phy_reset: ENTER ata_bus_reset: ENTER, host 1, port 0 ata_bus_softreset: ata1: bus reset via SRST ata_dev_classify: found ATA device by sig ata_bus_reset: EXIT ata_dev_identify: ENTER, host 1, dev 0 ata_dev_select: ENTER, ata1: device 0, wait 1 ata_dev_identify: do ATA identify ata_exec: ata1: cmd 0xEC ata_exec_command_mmio: ata1: cmd 0xEC ata1: dev 0 cfg 49:2f00 82:74eb 83:4bea 84:4000 85:7469 86:0802 87:4003 88:203f ata_dump_id: 49==0x2f00 53==0x0007 63==0x0007 64==0x0003 75==0x001f ata_dump_id: 80==0x003c 81==0x0015 82==0x74eb 83==0x4bea 84==0x4000 ata_dump_id: 88==0x203f 93==0x600b ata1: dev 0 ATA, max UDMA/100, 120103200 sectors ata_dev_identify: EXIT, drv_stat = 0x50 ata_dev_identify: ENTER/EXIT (host 1, dev 1) -- nodev ata_host_set_udma: udma masks: host 0x7F, master 0x3F, slave 0xFF ata_host_set_udma: mask 0x3F i 0x47 j 7 ata_host_set_udma: mask 0x3F i 0x46 j 6 ata_host_set_udma: mask 0x3F i 0x45 j 5 ata_dev_set_xfermode: set features - xfer mode ata_tf_load_mmio: feat 0x3 nsect 0x45 lba 0x0 0x0 0x0 ata_tf_load_mmio: device 0xA0 ata_exec: ata1: cmd 0xEF ata_exec_command_mmio: ata1: cmd 0xEF ata_dev_set_xfermode: EXIT ata1: dev 0 configured for UDMA/100 ata_thread_iter: ata1: new thr_state THR_PROBE_SUCCESS, returning 0 ata_thread_iter: ata1: thr_state THR_PROBE_SUCCESS ata_thread_iter: ata1: new thr_state THR_IDLE, returning 0 ata_thread_iter: ata1: thr_state THR_IDLE ata_thread_iter: ata1: new thr_state THR_IDLE, returning 30000 ata_device_add: ata1: probe-wait end scsi0 : sata_promise ata_device_add: ata2: probe begin ata_device_add: ata2: probe-wait begin ata_thread_iter: ata2: new thr_state THR_PORT_RESET, returning 0 ata_thread_iter: ata2: thr_state THR_PORT_RESET pdc_20621_phy_reset: ENTER ata_bus_reset: ENTER, host 2, port 1 ata_bus_softreset: ata2: bus reset via SRST ATA: abnormal status 0x8 on port 0xFFFFFF000028029C ata_bus_reset: EXIT ata_dev_identify: ENTER/EXIT (host 2, dev 0) -- nodev ata_dev_identify: ENTER/EXIT (host 2, dev 1) -- nodev ata_thread_iter: ata2: new thr_state THR_PROBE_FAILED, returning 0 ata_thread_iter: ata2: thr_state THR_PROBE_FAILED ata_thread_iter: ata2: new thr_state THR_AWAIT_DEATH, returning 0 ata_thread_iter: ata2: thr_state THR_AWAIT_DEATH ata_thread_iter: ata2: new thr_state THR_AWAIT_DEATH, returning -1 ata2: thread exiting ata_device_add: ata2: probe-wait end scsi1 : sata_promise ata_device_add: ata3: probe begin ata_device_add: ata3: probe-wait begin ata_thread_iter: ata3: new thr_state THR_PORT_RESET, returning 0 ata_thread_iter: ata3: thr_state THR_PORT_RESET pdc_20621_phy_reset: ENTER ata_bus_reset: ENTER, host 3, port 2 ata_bus_softreset: ata3: bus reset via SRST ATA: abnormal status 0x8 on port 0xFFFFFF000028031C ata_bus_reset: EXIT ata_dev_identify: ENTER/EXIT (host 3, dev 0) -- nodev ata_dev_identify: ENTER/EXIT (host 3, dev 1) -- nodev ata_thread_iter: ata3: new thr_state THR_PROBE_FAILED, returning 0 ata_thread_iter: ata3: thr_state THR_PROBE_FAILED ata_thread_iter: ata3: new thr_state THR_AWAIT_DEATH, returning 0 ata_thread_iter: ata3: thr_state THR_AWAIT_DEATH ata_thread_iter: ata3: new thr_state THR_AWAIT_DEATH, returning -1 ata3: thread exiting ata_device_add: ata3: probe-wait end scsi2 : sata_promise ata_device_add: ata4: probe begin ata_device_add: ata4: probe-wait begin ata_thread_iter: ata4: new thr_state THR_PORT_RESET, returning 0 ata_thread_iter: ata4: thr_state THR_PORT_RESET pdc_20621_phy_reset: ENTER ata_bus_reset: ENTER, host 4, port 3 ata_bus_softreset: ata4: bus reset via SRST ATA: abnormal status 0x8 on port 0xFFFFFF000028039C ata_bus_reset: EXIT ata_dev_identify: ENTER/EXIT (host 4, dev 0) -- nodev ata_dev_identify: ENTER/EXIT (host 4, dev 1) -- nodev ata_thread_iter: ata4: new thr_state THR_PROBE_FAILED, returning 0 ata_thread_iter: ata4: thr_state THR_PROBE_FAILED ata_thread_iter: ata4: new thr_state THR_AWAIT_DEATH, returning 0 ata_thread_iter: ata4: thr_state THR_AWAIT_DEATH ata_thread_iter: ata4: new thr_state THR_AWAIT_DEATH, returning -1 ata4: thread exiting ata_device_add: ata4: probe-wait end scsi3 : sata_promise ata_device_add: probe begin ata_scsi_queuecmd: CDB (1:0,0,0) 12 00 00 00 24 00 00 00 00 ata_scsiop_inq_std: ENTER ata_scsi_queuecmd: CDB (1:0,0,0) 12 00 00 00 61 00 00 00 00 ata_scsiop_inq_std: ENTER Vendor: ATA Model: IC35L060AVER07-0 Rev: 1.01 Type: Direct-Access ANSI SCSI revision: 05 ata_scsi_queuecmd: CDB (1:0,0,0) a0 00 00 00 00 00 00 00 04 ata_scsiop_report_luns: ENTER ata_scsi_queuecmd: CDB (1:0,1,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: no device ata_scsi_queuecmd: CDB (1:0,2,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,3,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,4,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,5,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,6,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,7,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,8,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,9,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,10,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,11,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,12,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,13,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,14,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:0,15,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,0,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,1,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,2,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,3,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,4,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,5,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,6,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,7,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,8,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,9,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,10,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,11,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,12,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,13,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,14,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (1:1,15,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,0,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: no device ata_scsi_queuecmd: CDB (2:0,1,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: no device ata_scsi_queuecmd: CDB (2:0,2,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,3,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,4,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,5,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,6,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,7,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,8,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,9,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,10,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,11,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,12,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,13,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,14,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:0,15,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,0,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,1,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,2,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,3,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,4,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,5,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,6,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,7,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,8,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,9,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,10,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,11,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,12,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,13,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,14,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (2:1,15,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,0,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: no device ata_scsi_queuecmd: CDB (3:0,1,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: no device ata_scsi_queuecmd: CDB (3:0,2,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,3,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,4,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,5,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,6,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,7,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,8,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,9,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,10,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,11,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,12,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,13,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,14,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:0,15,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,0,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,1,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,2,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,3,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,4,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,5,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,6,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,7,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,8,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,9,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,10,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,11,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,12,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,13,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,14,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (3:1,15,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,0,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: no device ata_scsi_queuecmd: CDB (4:0,1,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: no device ata_scsi_queuecmd: CDB (4:0,2,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,3,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,4,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,5,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,6,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,7,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,8,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,9,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,10,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,11,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,12,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,13,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,14,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:0,15,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,0,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,1,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,2,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,3,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,4,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,5,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,6,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,7,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,8,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,9,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,10,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,11,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,12,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,13,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,14,0) 12 00 00 00 24 00 00 00 00 ata_scsi_queuecmd: CDB (4:1,15,0) 12 00 00 00 24 00 00 00 00 ata_device_add: EXIT, returning 4 ata_thread_iter: ata1: thr_state THR_IDLE ata_thread_iter: ata1: new thr_state THR_IDLE, returning 30000 ata_thread_iter: ata1: thr_state THR_IDLE ata_thread_iter: ata1: new thr_state THR_IDLE, returning 30000 ata_thread_iter: ata1: thr_state THR_IDLE ata_thread_iter: ata1: new thr_state THR_IDLE, returning 30000