Who maintains the atp870u driver? (ACARD PCI SCSI)

[Stuart Longland <stuartl@longlandclan.hopto.org>]

[-- Attachment #1: Type: text/plain, Size: 3230 bytes --]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi All,
	Does anyone still maintain the atp870u SCSI driver, and if so, is it
possible for them to contact me?  I had a look in the atp870u.c file --
if I read this correctly, this driver hasn't changed much in the last
few years.  (Last log entry was in 2001).

	Basically, I recently acquired a PCI ACARD SCSI card (can't recall what
chipset exactly) and decided to use that in a Gateway Microserver server
appliance I had laying around.  The intent was to plug it into an
external tower of hard drives to make a nice compact fileserver for lans.

	The machine is a clone of the Cobalt Qube 2 (2800) server appliance,
running a 250MHz (?) MIPS "Nervada" R5200 CPU, 64MB EDO RAM, and 10GB
IBM IDE HDD internal.  It has one PCI slot, attached to a Galileo PCI
controller.  When first bought, it had a Lucent Winmodem installed
(Gateway branded).  All I've done is simply replaced the modem with this
SCSI card.  The box is running Debian 3.0 with Linux Kernel 2.4.24-pre2
(from linux-mips CVS).

	If I fire the box up, then run 'modprobe atp870u' -- with no devices
attached (or switched off), the driver loads, no worries.  However, if I
try doing the same with a device attached (and switched on), I get SCSI
timeout errors, and the driver initialisation stalls. -- I have to
reboot to unload the driver. (See attachment)

	The device in question is the tower of hard drives I mentioned above
(has 3x 18.2GB and 1x 9.1GB HDDs).  I know from previous testing that
neither the tower, the cable nor the terminator are at fault -- they
work just fine on both an SGI Indy and my main machine (with an Advansys
SCSI card) without any hassles.  I have also tried plugging in an
external tape drive, and got the same results.

	The only thing that I haven't tested is whether the card works (it was
sold second hand with a CDRW burner -- I presumed it did, and from the
tests tonight, there's at least a little bit of life), and what its
compatability is with Linux (in particular Linux/MIPS).  I've also tried
an Advansys SCSI card (the one in my main box) in the same machine with
no joy (it didn't work _at all_ -- so the ACARD host is currently doing
better right now)

	I'm not able to hack the driver myself, as I'm a newbie when it comes
to kernel hacking. (Otherwise I'd be looking into it right
now...unfortunately I'm a C newbie, and therefore the code is right over
my head.)  I might also later try the Linux-MIPS crew if this turns out
to be a MIPS-specific thing (I can't rule that one out).

Any assistance would be appreciated,
- --
+-------------------------------------------------------------+
| Stuart Longland           stuartl at longlandclan.hopto.org |
| Brisbane Mesh Node: 719             http://stuartl.cjb.net/ |
| I haven't lost my mind - it's backed up on a tape somewhere |
| Atomic Linux Project    <--->    http://atomicl.berlios.de/ |
+-------------------------------------------------------------+
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.2 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFAcCuHuarJ1mMmSrkRAsUHAJ9gyP5C/rGCes54tKVY4PC2V155fwCcCWMT
nDLFI1+sAvydOfNoRQVT2J8=
=L26G
-----END PGP SIGNATURE-----

[-- Attachment #2: qube_scsi_log.txt.gz --]
[-- Type: application/gzip, Size: 1234 bytes --]