From: Wyes Karny <wyes.karny@amd.com>
To: Huang Rui <ray.huang@amd.com>
Cc: Rafael J Wysocki <rafael@kernel.org>,
Jonathan Corbet <corbet@lwn.net>,
Viresh Kumar <viresh.kumar@linaro.org>,
"Limonciello, Mario" <Mario.Limonciello@amd.com>,
"Yuan, Perry" <Perry.Yuan@amd.com>,
"Narayan, Ananth" <Ananth.Narayan@amd.com>,
"Shenoy, Gautham Ranjal" <gautham.shenoy@amd.com>,
"linux-doc@vger.kernel.org" <linux-doc@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-pm@vger.kernel.org" <linux-pm@vger.kernel.org>,
Bagas Sanjaya <bagasdotme@gmail.com>,
"Shukla, Santosh" <Santosh.Shukla@amd.com>,
Len Brown <lenb@kernel.org>,
Robert Moore <robert.moore@intel.com>,
Borislav Petkov <bp@suse.de>
Subject: Re: [PATCH v3 0/6] amd_pstate: Add guided autonomous mode support
Date: Fri, 20 Jan 2023 15:25:28 +0530 [thread overview]
Message-ID: <4081d667-68e7-3d00-85ec-c6a974b9e761@amd.com> (raw)
In-Reply-To: <Y8pcfJ9Dd31gj+u6@amd.com>
Hi Ray,
On 1/20/2023 2:48 PM, Huang Rui wrote:
> On Thu, Jan 19, 2023 at 07:50:11PM +0800, Karny, Wyes wrote:
>> From ACPI spec[1] below 3 modes for CPPC can be defined:
>> 1. Non autonomous: OS scaling governor specifies operating frequency/
>> performance level through `Desired Performance` register and platform
>> follows that.
>> 2. Guided autonomous: OS scaling governor specifies min and max
>> frequencies/ performance levels through `Minimum Performance` and
>> `Maximum Performance` register, and platform can autonomously select an
>> operating frequency in this range.
>> 3. Fully autonomous: OS only hints (via EPP) to platform for the required
>> energy performance preference for the workload and platform autonomously
>> scales the frequency.
>>
>> Currently (1) is supported by amd_pstate as passive mode, and (3) is
>> implemented by EPP support[2]. This change is to support (2).
>>
>> In guided autonomous mode the min_perf is based on the input from the
>> scaling governor. For example, in case of schedutil this value depends
>> on the current utilization. And max_perf is set to max capacity.
>>
>> To activate guided auto mode ``amd_pstate=guided`` command line
>> parameter has to be passed in the kernel.
>>
>> Below are the results (normalized) of benchmarks with this patch:
>> System: Genoa 96C 192T
>> Kernel: 6.2.0-rc2 + EPP v11 + patch
>> Scaling governor: schedutil
>>
>> ================ dbench comparisons ================
>> dbench result comparison:
>> Here results are throughput (MB/s)
>> Clients: acpi-cpufreq amd_pst+passive amd_pst+guided
>> 1 1.00 (0.00 pct) 1.01 (1.00 pct) 1.02 (2.00 pct)
>> 2 1.07 (0.00 pct) 1.06 (-0.93 pct) 1.07 (0.00 pct)
>> 4 1.68 (0.00 pct) 1.70 (1.19 pct) 1.72 (2.38 pct)
>> 8 2.61 (0.00 pct) 2.68 (2.68 pct) 2.76 (5.74 pct)
>> 16 4.16 (0.00 pct) 4.24 (1.92 pct) 4.53 (8.89 pct)
>> 32 5.98 (0.00 pct) 6.17 (3.17 pct) 7.30 (22.07 pct)
>> 64 8.67 (0.00 pct) 8.99 (3.69 pct) 10.71 (23.52 pct)
>> 128 11.98 (0.00 pct) 12.52 (4.50 pct) 14.67 (22.45 pct)
>> 256 15.73 (0.00 pct) 16.13 (2.54 pct) 17.81 (13.22 pct)
>> 512 15.77 (0.00 pct) 16.32 (3.48 pct) 16.39 (3.93 pct)
>> dbench power comparison:
>> Clients: acpi-cpufreq amd_pst+passive amd_pst+guided
>> 1 1.00 (0.00 pct) 1.00 (0.00 pct) 1.04 (4.00 pct)
>> 2 0.99 (0.00 pct) 0.97 (-2.02 pct) 1.02 (3.03 pct)
>> 4 0.98 (0.00 pct) 0.98 (0.00 pct) 1.02 (4.08 pct)
>> 8 0.98 (0.00 pct) 0.99 (1.02 pct) 1.02 (4.08 pct)
>> 16 0.99 (0.00 pct) 1.00 (1.01 pct) 1.04 (5.05 pct)
>> 32 1.02 (0.00 pct) 1.02 (0.00 pct) 1.07 (4.90 pct)
>> 64 1.05 (0.00 pct) 1.05 (0.00 pct) 1.11 (5.71 pct)
>> 128 1.08 (0.00 pct) 1.08 (0.00 pct) 1.15 (6.48 pct)
>> 256 1.12 (0.00 pct) 1.12 (0.00 pct) 1.20 (7.14 pct)
>> 512 1.18 (0.00 pct) 1.17 (-0.84 pct) 1.26 (6.77 pct)
>>
>> ================ git-source comparisons ================
>> git-source result comparison:
>> Here results are throughput (compilations per 1000 sec)
>> Threads: acpi-cpufreq amd_pst+passive amd_pst+guided
>> 192 1.00 (0.00 pct) 0.93 (-7.00 pct) 1.00 (0.00 pct)
>> git-source power comparison:
>> Threads: acpi-cpufreq amd_pst+passive amd_pst+guided
>> 192 1.00 (0.00 pct) 1.00 (0.00 pct) 0.96 (-4.00 pct)
>>
>> ================ kernbench comparisons ================
>> kernbench result comparison:
>> Here results are throughput (compilations per 1000 sec)
>> Load: acpi-cpufreq amd_pst+passive amd_pst+guided
>> 32 1.00 (0.00 pct) 1.01 (1.00 pct) 1.02 (2.00 pct)
>> 48 1.26 (0.00 pct) 1.28 (1.58 pct) 1.25 (-0.79 pct)
>> 64 1.39 (0.00 pct) 1.47 (5.75 pct) 1.43 (2.87 pct)
>> 96 1.48 (0.00 pct) 1.50 (1.35 pct) 1.49 (0.67 pct)
>> 128 1.29 (0.00 pct) 1.32 (2.32 pct) 1.33 (3.10 pct)
>> 192 1.17 (0.00 pct) 1.20 (2.56 pct) 1.21 (3.41 pct)
>> 256 1.17 (0.00 pct) 1.18 (0.85 pct) 1.20 (2.56 pct)
>> 384 1.16 (0.00 pct) 1.17 (0.86 pct) 1.21 (4.31 pct)
>> kernbench power comparison:
>> Clients: acpi-cpufreq amd_pst+passive amd_pst+guided
>> 32 1.00 (0.00 pct) 0.97 (-3.00 pct) 1.00 (0.00 pct)
>> 48 0.87 (0.00 pct) 0.81 (-6.89 pct) 0.88 (1.14 pct)
>> 64 0.81 (0.00 pct) 0.73 (-9.87 pct) 0.77 (-4.93 pct)
>> 96 0.75 (0.00 pct) 0.74 (-1.33 pct) 0.75 (0.00 pct)
>> 128 0.83 (0.00 pct) 0.79 (-4.81 pct) 0.83 (0.00 pct)
>> 192 0.92 (0.00 pct) 0.88 (-4.34 pct) 0.92 (0.00 pct)
>> 256 0.92 (0.00 pct) 0.88 (-4.34 pct) 0.92 (0.00 pct)
>> 384 0.92 (0.00 pct) 0.88 (-4.34 pct) 0.92 (0.00 pct)
>>
>> ================ tbench comparisons ================
>> tbench result comparison:
>> Here results are throughput (MB/s)
>> Clients: acpi-cpufreq amd_pst+passive amd_pst+guided
>> 1 1.00 (0.00 pct) 0.70 (-30.00 pct) 1.37 (37.00 pct)
>> 2 2.64 (0.00 pct) 1.39 (-47.34 pct) 2.70 (2.27 pct)
>> 4 4.89 (0.00 pct) 2.75 (-43.76 pct) 5.28 (7.97 pct)
>> 8 9.46 (0.00 pct) 5.42 (-42.70 pct) 10.22 (8.03 pct)
>> 16 19.05 (0.00 pct) 10.42 (-45.30 pct) 19.94 (4.67 pct)
>> 32 37.50 (0.00 pct) 20.23 (-46.05 pct) 36.87 (-1.68 pct)
>> 64 61.24 (0.00 pct) 43.08 (-29.65 pct) 62.96 (2.80 pct)
>> 128 67.16 (0.00 pct) 69.08 (2.85 pct) 67.34 (0.26 pct)
>> 256 154.59 (0.00 pct) 162.33 (5.00 pct) 156.78 (1.41 pct)
>> 512 154.02 (0.00 pct) 156.74 (1.76 pct) 153.48 (-0.35 pct)
>> tbench power comparison:
>> Clients: acpi-cpufreq amd_pst+passive amd_pst+guided
>> 1 1.00 (0.00 pct) 0.97 (-3.00 pct) 1.08 (8.00 pct)
>> 2 1.04 (0.00 pct) 0.97 (-6.73 pct) 1.11 (6.73 pct)
>> 4 1.12 (0.00 pct) 0.99 (-11.60 pct) 1.18 (5.35 pct)
>> 8 1.25 (0.00 pct) 1.04 (-16.80 pct) 1.31 (4.80 pct)
>> 16 1.53 (0.00 pct) 1.13 (-26.14 pct) 1.58 (3.26 pct)
>> 32 2.01 (0.00 pct) 1.36 (-32.33 pct) 2.03 (0.99 pct)
>> 64 2.58 (0.00 pct) 2.14 (-17.05 pct) 2.61 (1.16 pct)
>> 128 2.80 (0.00 pct) 2.81 (0.35 pct) 2.81 (0.35 pct)
>> 256 3.39 (0.00 pct) 3.43 (1.17 pct) 3.42 (0.88 pct)
>> 512 3.44 (0.00 pct) 3.44 (0.00 pct) 3.44 (0.00 pct)
>>
>> Note: this series is based on top of EPP v11 [3] series
>>
>> Change log:
>>
>> v2 -> v3:
>> - Addressed review comments form Mario.
>> - Picked up RB tag from Mario.
>> - Rebase on top of EPP v11 [3].
>>
>> v1 -> v2:
>> - Fix issue with shared mem systems.
>> - Rebase on top of EPP series.
>>
>> [1]: https://uefi.org/sites/default/files/resources/ACPI_6_3_final_Jan30.pdf
>> [2]: https://lore.kernel.org/lkml/20221110175847.3098728-1-Perry.Yuan@amd.com/
>> [3]: https://lore.kernel.org/linux-pm/20230118075210.447418-1-perry.yuan@amd.com/
>>
>>
>> Wyes Karny (6):
>> acpi: cppc: Add min and max perf reg writing support
>> acpi: cppc: Add auto select register read/write support
>> cpufreq: amd_pstate: Add guided autonomous mode
>> Documentation: amd_pstate: Move amd_pstate param to alphabetical order
>> cpufreq: amd_pstate: Add guided mode control support via sysfs
>> Documentation: amd_pstate: Update amd_pstate status sysfs for guided
>>
>
> Wyes, thanks for the patches. I will take a look at them after Chinese new
> year.
Sure, thanks!
Happy new year!
>
> Thanks,
> Ray
--
Thanks & Regards,
Wyes
next prev parent reply other threads:[~2023-01-20 9:56 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-19 11:50 Wyes Karny
2023-01-19 11:50 ` [PATCH v3 1/6] acpi: cppc: Add min and max perf reg writing support Wyes Karny
2023-01-19 11:50 ` [PATCH v3 2/6] acpi: cppc: Add auto select register read/write support Wyes Karny
2023-01-19 11:50 ` [PATCH v3 3/6] cpufreq: amd_pstate: Add guided autonomous mode Wyes Karny
2023-01-19 11:50 ` [PATCH v3 4/6] Documentation: amd_pstate: Move amd_pstate param to alphabetical order Wyes Karny
2023-01-19 11:50 ` [PATCH v3 5/6] cpufreq: amd_pstate: Add guided mode control support via sysfs Wyes Karny
2023-01-19 11:50 ` [PATCH v3 6/6] Documentation: amd_pstate: Update amd_pstate status sysfs for guided Wyes Karny
2023-01-19 12:30 ` Bagas Sanjaya
2023-01-20 4:16 ` Wyes Karny
2023-01-20 9:18 ` [PATCH v3 0/6] amd_pstate: Add guided autonomous mode support Huang Rui
2023-01-20 9:55 ` Wyes Karny [this message]
2023-01-24 20:40 ` Tor Vic
2023-01-25 10:25 ` Wyes Karny
2023-01-31 5:34 ` Wyes Karny
2023-02-01 18:15 ` Tor Vic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4081d667-68e7-3d00-85ec-c6a974b9e761@amd.com \
--to=wyes.karny@amd.com \
--cc=Ananth.Narayan@amd.com \
--cc=Mario.Limonciello@amd.com \
--cc=Perry.Yuan@amd.com \
--cc=Santosh.Shukla@amd.com \
--cc=bagasdotme@gmail.com \
--cc=bp@suse.de \
--cc=corbet@lwn.net \
--cc=gautham.shenoy@amd.com \
--cc=lenb@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=ray.huang@amd.com \
--cc=robert.moore@intel.com \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®