From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Thu, 17 May 2001 20:26:36 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Thu, 17 May 2001 20:26:16 -0400 Received: from radio.protv.ro ([193.230.227.51]:18191 "EHLO radio.protv.ro") by vger.kernel.org with ESMTP id ; Thu, 17 May 2001 20:26:13 -0400 Message-ID: <4085.193.230.227.44.990145565.squirrel@radio.protv.ro> Date: Fri, 18 May 2001 03:26:05 +0300 (EEST) Subject: Re: Ide Floppy problems From: "Mihai Moldovanu" To: jari.ruusu@pp.inet.fi In-Reply-To: <3B044EE7.B77BA8EA@pp.inet.fi> In-Reply-To: <3B044EE7.B77BA8EA@pp.inet.fi> Cc: linux-kernel@vger.kernel.org Reply-To: mihaim@profm.ro X-Mailer: SquirrelMail (version 1.0.6) MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7BIT Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org >> May 17 05:42:20 m kernel: hdd: lost interrupt >> May 17 05:42:20 m kernel: ide-floppy: CoD != 0 in idefloppy_pc_intr >> May 17 05:42:20 m kernel: hdd: ATAPI reset complete >> May 17 05:43:10 m kernel: hdd: lost interrupt >> May 17 05:43:10 m kernel: ide-floppy: CoD != 0 in idefloppy_pc_intr >> May 17 05:43:10 m kernel: hdd: ATAPI reset complete >> After another 1 minute of this repeated messages I push reset . >> Any ideeas ? > > CONFIG_BLK_DEV_IDEFLOPPY=n > CONFIG_BLK_DEV_IDESCSI=y > CONFIG_SCSI=y > CONFIG_BLK_DEV_SD=y > > And, your ZIP drive shows up as SCSI disk. This also has the advantage > that you can use ziptool to write protect / unprotect / eject ZIP > disks. Ide-floppy never worker properly for me. Ide-scsi has worked > without problems. Does not work with SCSI drivers. Same kind of error . May 18 03:10:02 m kernel: hdd: lost interrupt May 18 03:10:02 m kernel: ide-scsi: CoD != 0 in idescsi_pc_intr May 18 03:10:02 m kernel: hdd: ATAPI reset complete May 18 03:10:02 m kernel: hdd: irq timeout: status=0x80 { Busy } -- Mihai Moldovanu