From: Heiner Kallweit <heiner.kallweit@web.de>
To: Justin Lai <justinlai0215@realtek.com>, kuba@kernel.org
Cc: davem@davemloft.net, edumazet@google.com, pabeni@redhat.com,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
andrew@lunn.ch, pkshih@realtek.com, larry.chiu@realtek.com
Subject: Re: [PATCH net-next v11 10/13] net:ethernet:realtek:rtase: Implement ethtool function
Date: Wed, 15 Nov 2023 16:02:14 +0100 [thread overview]
Message-ID: <409a4eaf-3d2b-4de6-a0f0-245cc1523bee@web.de> (raw)
In-Reply-To: <20231115133414.1221480-11-justinlai0215@realtek.com>
On 15.11.2023 14:34, Justin Lai wrote:
> Implement the ethtool function to support users to obtain network card
> information, including obtaining various device settings, Report whether
> physical link is up, Report pause parameters, Set pause parameters,
> Return a set of strings that describe the requested objects, Get number
> of strings that @get_strings will write, Return extended statistics
> about the device.
>
> Signed-off-by: Justin Lai <justinlai0215@realtek.com>
> ---
> .../net/ethernet/realtek/rtase/rtase_main.c | 144 ++++++++++++++++++
> 1 file changed, 144 insertions(+)
>
> diff --git a/drivers/net/ethernet/realtek/rtase/rtase_main.c b/drivers/net/ethernet/realtek/rtase/rtase_main.c
> index b7679b74cc8a..5ea4d51fcc47 100644
> --- a/drivers/net/ethernet/realtek/rtase/rtase_main.c
> +++ b/drivers/net/ethernet/realtek/rtase/rtase_main.c
> @@ -1900,9 +1900,153 @@ static void rtase_get_mac_address(struct net_device *dev)
> ether_addr_copy(dev->perm_addr, dev->dev_addr);
> }
>
> +static void rtase_get_drvinfo(struct net_device *dev,
> + struct ethtool_drvinfo *drvinfo)
> +{
> + const struct rtase_private *tp = netdev_priv(dev);
> +
> + strscpy(drvinfo->driver, KBUILD_MODNAME, 32);
> + strscpy(drvinfo->bus_info, pci_name(tp->pdev), 32);
> +}
> +
> +static int rtase_get_settings(struct net_device *dev,
> + struct ethtool_link_ksettings *cmd)
> +{
> + u32 supported = SUPPORTED_MII | SUPPORTED_Pause | SUPPORTED_Asym_Pause;
> +
> + ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
> + supported);
> + cmd->base.speed = SPEED_5000;
> + cmd->base.duplex = DUPLEX_FULL;
> + cmd->base.port = PORT_MII;
> + cmd->base.autoneg = AUTONEG_DISABLE;
> +
What are you reporting here? Does this refer to the link between MAC and
switch CPU port? Because I would assume that the switch ports can do autoneg.
> + return 0;
> +}
> +
> +static void rtase_get_pauseparam(struct net_device *dev,
> + struct ethtool_pauseparam *pause)
> +{
> + const struct rtase_private *tp = netdev_priv(dev);
> + u16 value = rtase_r16(tp, RTASE_CPLUS_CMD);
> +
> + pause->autoneg = AUTONEG_DISABLE;
> +
> + if ((value & (FORCE_TXFLOW_EN | FORCE_RXFLOW_EN)) ==
> + (FORCE_TXFLOW_EN | FORCE_RXFLOW_EN)) {
> + pause->rx_pause = 1;
> + pause->tx_pause = 1;
> + } else if ((value & FORCE_TXFLOW_EN)) {
> + pause->tx_pause = 1;
> + } else if ((value & FORCE_RXFLOW_EN)) {
> + pause->rx_pause = 1;
> + }
> +}
> +
> +static int rtase_set_pauseparam(struct net_device *dev,
> + struct ethtool_pauseparam *pause)
> +{
> + const struct rtase_private *tp = netdev_priv(dev);
> + u16 value = rtase_r16(tp, RTASE_CPLUS_CMD);
> +
> + if (pause->autoneg)
> + return -EOPNOTSUPP;
> +
> + value &= ~(FORCE_TXFLOW_EN | FORCE_RXFLOW_EN);
> +
> + if (pause->tx_pause)
> + value |= FORCE_TXFLOW_EN;
> +
> + if (pause->rx_pause)
> + value |= FORCE_RXFLOW_EN;
> +
> + rtase_w16(tp, RTASE_CPLUS_CMD, value);
> + return 0;
> +}
> +
> +static const char rtase_gstrings[][ETH_GSTRING_LEN] = {
> + "tx_packets",
> + "rx_packets",
> + "tx_errors",
> + "rx_errors",
> + "rx_missed",
> + "align_errors",
> + "tx_single_collisions",
> + "tx_multi_collisions",
> + "unicast",
> + "broadcast",
> + "multicast",
> + "tx_aborted",
> + "tx_underrun",
> +};
> +
> +static void rtase_get_strings(struct net_device *dev, u32 stringset, u8 *data)
> +{
> + switch (stringset) {
> + case ETH_SS_STATS:
> + memcpy(data, *rtase_gstrings, sizeof(rtase_gstrings));
> + break;
> + }
> +}
> +
> +static int rtase_get_sset_count(struct net_device *dev, int sset)
> +{
> + int ret = -EOPNOTSUPP;
> +
> + switch (sset) {
> + case ETH_SS_STATS:
> + ret = ARRAY_SIZE(rtase_gstrings);
> + break;
> + }
> +
> + return ret;
> +}
> +
> +static void rtase_get_ethtool_stats(struct net_device *dev,
> + struct ethtool_stats *stats, u64 *data)
> +{
> + struct rtase_private *tp = netdev_priv(dev);
> + const struct rtase_counters *counters;
> +
> + ASSERT_RTNL();
> +
> + counters = tp->tally_vaddr;
> + if (!counters)
> + return;
> +
> + rtase_dump_tally_counter(tp);
> +
> + data[0] = le64_to_cpu(counters->tx_packets);
> + data[1] = le64_to_cpu(counters->rx_packets);
> + data[2] = le64_to_cpu(counters->tx_errors);
> + data[3] = le32_to_cpu(counters->rx_errors);
> + data[4] = le16_to_cpu(counters->rx_missed);
> + data[5] = le16_to_cpu(counters->align_errors);
> + data[6] = le32_to_cpu(counters->tx_one_collision);
> + data[7] = le32_to_cpu(counters->tx_multi_collision);
> + data[8] = le64_to_cpu(counters->rx_unicast);
> + data[9] = le64_to_cpu(counters->rx_broadcast);
> + data[10] = le32_to_cpu(counters->rx_multicast);
> + data[11] = le16_to_cpu(counters->tx_aborted);
> + data[12] = le16_to_cpu(counters->tx_underun);
> +}
> +
> +static const struct ethtool_ops rtase_ethtool_ops = {
> + .get_drvinfo = rtase_get_drvinfo,
> + .get_link = ethtool_op_get_link,
> + .get_link_ksettings = rtase_get_settings,
> + .get_pauseparam = rtase_get_pauseparam,
> + .set_pauseparam = rtase_set_pauseparam,
> + .get_strings = rtase_get_strings,
> + .get_sset_count = rtase_get_sset_count,
> + .get_ethtool_stats = rtase_get_ethtool_stats,
> + .get_ts_info = ethtool_op_get_ts_info,
> +};
> +
> static void rtase_init_netdev_ops(struct net_device *dev)
> {
> dev->netdev_ops = &rtase_netdev_ops;
> + dev->ethtool_ops = &rtase_ethtool_ops;
> }
>
> static void rtase_reset_interrupt(struct pci_dev *pdev,
next prev parent reply other threads:[~2023-11-15 15:02 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-15 13:34 [PATCH net-next v11 00/13] Add Realtek automotive PCIe driver Justin Lai
2023-11-15 13:34 ` [PATCH net-next v11 01/13] net:ethernet:realtek:rtase: Add pci table supported in this module Justin Lai
2023-11-15 13:34 ` [PATCH net-next v11 02/13] net:ethernet:realtek:rtase: Implement the .ndo_open function Justin Lai
2023-11-15 13:34 ` [PATCH net-next v11 03/13] net:ethernet:realtek:rtase: Implement the rtase_down function Justin Lai
2023-11-15 13:34 ` [PATCH net-next v11 04/13] net:ethernet:realtek:rtase: Implement the interrupt routine and rtase_poll Justin Lai
2023-11-15 13:34 ` [PATCH net-next v11 05/13] net:ethernet:realtek:rtase: Implement hardware configuration function Justin Lai
2023-11-15 15:02 ` Heiner Kallweit
2023-11-21 11:54 ` Justin Lai
2023-11-16 18:06 ` Simon Horman
2023-11-23 3:48 ` Justin Lai
2023-11-18 22:50 ` Jakub Kicinski
2023-11-20 13:22 ` Justin Lai
2023-11-15 13:34 ` [PATCH net-next v11 06/13] net:ethernet:realtek:rtase: Implement .ndo_start_xmit function Justin Lai
2023-11-15 13:34 ` [PATCH net-next v11 07/13] net:ethernet:realtek:rtase: Implement a function to receive packets Justin Lai
2023-11-15 13:34 ` [PATCH net-next v11 08/13] net:ethernet:realtek:rtase: Implement net_device_ops Justin Lai
2023-11-15 13:34 ` [PATCH net-next v11 09/13] net:ethernet:realtek:rtase: Implement pci_driver suspend and resume function Justin Lai
2023-11-15 15:02 ` Heiner Kallweit
2023-11-21 9:30 ` Justin Lai
2023-11-15 13:34 ` [PATCH net-next v11 10/13] net:ethernet:realtek:rtase: Implement ethtool function Justin Lai
2023-11-15 15:02 ` Heiner Kallweit [this message]
2023-11-23 3:16 ` Justin Lai
2023-11-15 13:34 ` [PATCH net-next v11 11/13] net:ethernet:realtek:rtase: Add a Makefile in the rtase folder Justin Lai
2023-11-15 13:34 ` [PATCH net-next v11 12/13] net:ethernet:realtek: Update the Makefile and Kconfig in the realtek folder Justin Lai
2023-11-15 19:58 ` kernel test robot
2023-11-21 10:00 ` kernel test robot
2023-11-15 13:34 ` [PATCH net-next v11 13/13] MAINTAINERS: Add the rtase ethernet driver entry Justin Lai
2023-11-16 17:57 ` [PATCH net-next v11 00/13] Add Realtek automotive PCIe driver Simon Horman
2023-11-21 9:35 ` Justin Lai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=409a4eaf-3d2b-4de6-a0f0-245cc1523bee@web.de \
--to=heiner.kallweit@web.de \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=justinlai0215@realtek.com \
--cc=kuba@kernel.org \
--cc=larry.chiu@realtek.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=pkshih@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome