Florian Hars wrote:
> Do you need anything else, besides the attached gunziped config.gz?

Thou shallst not forget the z on zcat... here is the stripped, unziped config.

This might be relevant, too:

hars@prony:~/tmp$ cat /sys/devices/pci0000\:00/0000\:00\:10.4/pools
poolinfo - 0.1
ehci_sitd           0    0   96  0
ehci_itd            0    0  192  0
ehci_qh             4   25  160  1
ehci_qtd            4   42   96  1
buffer-2048         0    0 2048  0
buffer-512          0    0  512  0
buffer-128          1   32  128  1
buffer-32           2  128   32  1
hars@prony:~/tmp$ cat /sys/devices/pci0000\:00/0000\:00\:10.4/subsystem_vendor
0x1106
hars@prony:~/tmp$ cat /sys/devices/pci0000\:00/0000\:00\:10.4/subsystem_device
0x3104

The whole thing is a VIA K8T800 an Epox 8HDA Mainboard.

Yours, Florian.