Linux version 2.6.7-rc2 (evil@prinz) (gcc-Version 3.3.3 (Debian 20040422)) #1 Wed Jun 2 09:19:38 CEST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ec000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data) BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 AMI ) @ 0x000fa780 ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x1fff0000 ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x1fff0030 ACPI: DSDT (v001 VIA VT8371 0x00001000 MSFT 0x0100000b) @ 0x00000000 Built 1 zonelists Kernel command line: BOOT_IMAGE=2.6-BK ro root=805 acpi=force nmi_watchdog=1 2 Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 902.277 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Memory: 515828k/524224k available (2080k kernel code, 7632k reserved, 753k data, 392k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 1777.66 BogoMIPS Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0183fbff c1c7fbff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) Processor stepping 02 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 testing NMI watchdog ... OK. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 901.0914 MHz. ..... host bus clock speed is 200.0425 MHz. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:.................................................................................................... Table [DSDT](id F004) - 399 Objects with 35 Devices 100 Methods 27 Regions ACPI Namespace successfully loaded at root c0440d1c ACPI: IRQ9 SCI: Edge set to Level Trigger. spurious 8259A interrupt: IRQ7. evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful evgpeblk-0867 [06] ev_create_gpe_block : GPE 00 to 15 [_GPE] 2 regs at 0000000000000820 on int 9 evgpeblk-0925 [06] ev_create_gpe_block : Found 0 Wake, Enabled 4 Runtime GPEs in this block Completing Region/Field/Buffer/Package initialization:......................................................................... Initialized 27/27 Regions 6/6 Fields 28/28 Buffers 12/12 Packages (408 nodes) Executing all Device _STA and_INI methods:..................................... 37 Devices found containing: 37 _STA, 2 _INI methods ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: Using ACPI for IRQ routing vesafb: framebuffer at 0xd0000000, mapped to 0xe0808000, size 2560k vesafb: mode is 1280x1024x8, linelength=1280, pages=2 vesafb: protected mode interface info at c000:bbe0 vesafb: scrolling: redraw fb0: VESA VGA frame buffer device Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.13 devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: devfs_debug: 0x0 devfs: boot_options: 0x1 Initializing Cryptographic API PCI: Disabling Via external APIC routing ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU1] (supports C1, 16 throttling states) Console: switching to colour frame buffer device 160x64 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:00:0a.0: 3Com PCI 3c905C Tornado at 0xcc00. Vers LK1.1.19 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:07.1 VP_IDE: chipset revision 16 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:07.1 ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio hda: CRD-8483B, ATAPI CD/DVD-ROM drive hdb: AOPEN CD-RW CRW3248 1.17 20020620, ATAPI CD/DVD-ROM drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 PDC20265: IDE controller at PCI slot 0000:00:10.0 PDC20265: chipset revision 2 PDC20265: ROM enabled at 0xdff60000 PDC20265: 100% native mode on irq 10 PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. ide2: BM-DMA at 0xb400-0xb407, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xb408-0xb40f, BIOS settings: hdg:pio, hdh:pio sym0: <895> rev 0x1 at pci 0000:00:0c.0 irq 11 sym0: Tekram NVRAM, ID 7, Fast-40, LVD, parity checking sym0: SCSI BUS has been reset. scsi0 : sym-2.1.18j sym0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25.0 ns, offset 31) Vendor: IBM-ESXS Model: ST318305LW !# Rev: B245 Type: Direct-Access ANSI SCSI revision: 03 sym0:0:0: tagged command queuing enabled, command queue depth 16. scsi(0:0:0:0): Beginning Domain Validation sym0:0: asynchronous. sym0:0: wide asynchronous. sym0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25.0 ns, offset 31) scsi(0:0:0:0): Ending Domain Validation SCSI device sda: 35548320 512-byte hdwr sectors (18201 MB) SCSI device sda: drive cache: write back /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 USB Universal Host Controller Interface driver v2.2 uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller uhci_hcd 0000:00:07.2: irq 10, io base 0000d000 uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) uhci_hcd 0000:00:07.3: irq 10, io base 0000d400 uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 PM: Reading pmdisk image. PM: Resume from disk failed. ACPI: (supports S0 S1 S4 S5) BIOS EDD facility v0.15 2004-May-17, 6 devices found kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 392k freed usb 1-1: new low speed USB device using address 2 input: USB HID v1.00 Keyboard [046a:0001] on usb-0000:00:07.2-1 usb 1-2: new low speed USB device using address 3 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:07.2-2 Adding 292840k swap on /dev/sda6. Priority:0 extents:1 EXT3 FS on sda5, internal journal Real Time Clock Driver v1.12 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A nfs warning: mount version older than kernel nfs warning: mount version older than kernel nfs warning: mount version older than kernel nfs warning: mount version older than kernel nfs warning: mount version older than kernel NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver