From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S266035AbUFVWfq (ORCPT ); Tue, 22 Jun 2004 18:35:46 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S266031AbUFVWfR (ORCPT ); Tue, 22 Jun 2004 18:35:17 -0400 Received: from smtp-out7.xs4all.nl ([194.109.24.8]:7176 "EHLO smtp-out7.xs4all.nl") by vger.kernel.org with ESMTP id S266078AbUFVWdN (ORCPT ); Tue, 22 Jun 2004 18:33:13 -0400 Message-ID: <40D8B375.1080709@zwanebloem.nl> Date: Wed, 23 Jun 2004 00:32:21 +0200 From: Tommy Faasen User-Agent: Mozilla Thunderbird 0.5 (Windows/20040207) X-Accept-Language: en-us, en MIME-Version: 1.0 To: thinkliberty , linux-kernel@vger.kernel.org, USB development list , linux-usb-users@lists.sourceforge.net Subject: Re: [bug?] usb device ok with ohci, fails to accept an address with uhci References: <40D88F79.6010309@zwanebloem.nl> <77709e760406221454272d8c61@mail.gmail.com> In-Reply-To: <77709e760406221454272d8c61@mail.gmail.com> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit X-zwanebloem-MailScanner: Found to be clean Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org thinkliberty wrote: >Is there an option for legacy support for USB in the BIOS? > > > No the closest thing is usb keyboard support, I tried both options. >Are You using a hub to connect the device? or is it directly in to the >USB port on the motherboard? > > > It's directly connected to the mainboard. Regards, Tommy >On Tue, 22 Jun 2004 21:58:49 +0200, Tommy Faasen wrote: > > >>Hi, >> >>I have a sweex usb-wifi stick see also >>http://sourceforge.net/projects/linux-lc100020/ and it's forums. >>And I have 2 machines >>Machine 1: Via kt133a chipset -> uhci_hcd >>Machine 2: Sis 748 Chipset -> ohci_hcd >> >>The device works without a problem on machine 2 with at least kernels >>2.6.6 and 2.6.7. >>The usb wifi stick fails to accept an address on machine 1. There is a >>good faq about it with things you can try. (turn off acpi, irq for usb, >>no irq sharing, removing all pci cards,etc) I tried everything but with >>no luck. >>I tried kernels 2.4.26 till and including 2.6.7 without luck, however on >>the same machine is also connected an usb joystick that works without a >>problem, so my usb does work. >> >>The usb wifi stick is known to need to get a descriptor before settings >>it's address but even with this patch I can't get it to work ( I didn't >>need the patch for machine 2). >> >>I read some usb specs/docs kernel usb stuff, but since I'm no expert I >>cannot see where the problem is, therefore posted below is some >>information that hopefully is helpfull to you. >> >>Please let me know what else I can do to help, >> >>Tommy >> >>Dmesg output: >>uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 >>Controller >>uhci_hcd 0000:00:07.2: irq 10, io base 0000d400 >>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 >>uhci_hcd 0000:00:07.2: detected 2 ports >>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 >>usb usb1: default language 0x0409 >>usb usb1: Product: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller >>usb usb1: Manufacturer: Linux 2.6.7 uhci_hcd >>usb usb1: SerialNumber: 0000:00:07.2 >>usb usb1: hotplug >>usb usb1: adding 1-0:1.0 (config #1, interface 0) >>usb 1-0:1.0: hotplug >>hub 1-0:1.0: usb_probe_interface >>hub 1-0:1.0: usb_probe_interface - got id >>hub 1-0:1.0: USB hub found >>hub 1-0:1.0: 2 ports detected >>hub 1-0:1.0: standalone hub >>hub 1-0:1.0: no power switching (usb 1.0) >>hub 1-0:1.0: individual port over-current protection >>hub 1-0:1.0: power on to power good time: 2ms >>hub 1-0:1.0: local power source is good >>PCI: Found IRQ 10 for device 0000:00:07.3 >>PCI: Sharing IRQ 10 with 0000:00:07.2 >>PCI: Sharing IRQ 10 with 0000:00:0d.0 >>PCI: Sharing IRQ 10 with 0000:00:0b.0 >>uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 >>Controller (#2) >>uhci_hcd 0000:00:07.3: irq 10, io base 0000d800 >>uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 >>uhci_hcd 0000:00:07.3: detected 2 ports >>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 >>usb usb2: default language 0x0409 >>usb usb2: Product: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 >>Controller (#2) >>usb usb2: Manufacturer: Linux 2.6.7 uhci_hcd >>usb usb2: SerialNumber: 0000:00:07.3 >>usb usb2: hotplug >>usb usb2: adding 2-0:1.0 (cuhci_hcd 0000:00:07.2: port 1 portsc 01ab >>hub 1-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s >>uhci_hcd 0000:00:07.2: port 1 portsc 01a9 >>uhci_hcd 0000:00:07.2: port 1 portsc 01a9 >>uhci_hcd 0000:00:07.2: port 1 portsc 01a9 >>usb 2-0:1.0: hotplug >>hub 2-0:1.0: usb_probe_interface >>hub 2-0:1.0: usb_probe_interface - got id >>hub 2-0:1.0: USB hub found >>hub 2-0:1.0: 2 ports detected >>hub 2-0:1.0: standalone hub >>hub 2-0:1.0: no power switching (usb 1.0) >>hub 2-0:1.0: individual port over-current protection >>hub 2-0:1.0: power on to power good time: 2ms >>hub 2-0:1.0: local power source is good >>uhci_hcd 0000:00:07.2: port 1 portsc 01a9 >>uhci_hcd 0000:00:07.2: port 1 portsc 01a9 >>hub 1-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x301 >>usb 1-1: new low speed USB device using address 2 >>usb 1-1: skipped 1 descriptor after interface >>usb 1-1: new device strings: Mfr=4, Product=32, SerialNumber=0 >>usb 1-1: default language 0x0409 >>usb 1-1: Product: WingMan Gamepad >>usb 1-1: Manufacturer: Logitech Inc. >>usb 1-1: hotplug >>usb 1-1: adding 1-1:1.0 (config #1, interface 0) >>usb 1-1:1.0: hotplug >>uhci_hcd 0000:00:07.2: port 2 portsc 018a >>hub 1-0:1.0: port 2, status 0300, change 0003, 1.5 Mb/s >>uhci_hcd 0000:00:07.2: port 2 portsc 0188 >>hub 1-0:1.0: port 2 enable change, status 00000300 >>uhci_hcd 0000:00:07.3: port 1 portsc 018a >>hub 2-0:1.0: port 1, status 0300, change 0003, 1.5 Mb/s >>uhci_hcd 0000:00:07.3: port 2 portsc 008a >>hub 2-0:1.0: port 2, status 0100, change 0003, 12 Mb/s >>uhci_hcd 0000:00:07.3: port 1 portsc 0188 >>hub 2-0:1.0: port 1 enable change, status 00000300 >>uhci_hcd 0000:00:07.3: port 2 portsc 0088 >>hub 2-0:1.0: port 2 enable change, status 00000100 >>uhci_hcd 0000:00:07.3: suspend_hc >>uhci_hcd 0000:00:07.2: port 2 portsc 0093 >>hub 1-0:1.0: port 2, status 0101, change 0001, 12 Mb/s >>hub 1-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x101 >>usb 1-2: new full speed USB device using address 3 >>uhci_hcd 0000:00:07.2: uhci_result_control: failed with status 440000 >>[e6fe4240] link (26fe41e2) element (26fe3040) >> 0: [e6fe3040] link (26fe3080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 >>DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=255aeec8) >> 1: [e6fe3080] link (26fe30c0) e3 SPD Active Length=0 MaxLen=7 DT1 >>EndPt=0 Dev=0, PID=69(IN) (buf=273ddf14) >> 2: [e6fe30c0] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 >>EndPt=0 Dev=0, PID=e1(OUT) (buf=00000000) >> >>uhci_hcd 0000:00:07.2: uhci_result_control: failed with status 440000 >>[e6fe4240] link (26fe41e2) element (26fe3040) >> 0: [e6fe3040] link (26fe3080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 >>DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=255aeec8) >> 1: [e6fe3080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 >>EndPt=0 Dev=0, PID=69(IN) (buf=00000000) >> >>uhci_hcd 0000:00:07.2: uhci_result_control: failed with status 440000 >>[e6fe4240] link (26fe41e2) element (26fe3040) >> 0: [e6fe3040] link (26fe3080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 >>DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=255aeec8) >> 1: [e6fe3080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 >>EndPt=0 Dev=0, PID=69(IN) (buf=00000000) >> >>usb 1-2: device not accepting address 3, error -71 >>usb 1-2: new full speed USB device using address 4 >>uhci_hcd 0000:00:07.2: uhci_result_control: failed with status 440000 >>[e6fe4240] link (26fe41e2) element (26fe3040) >> 0: [e6fe3040] link (26fe3080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 >>DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=255aeec8) >> 1: [e6fe3080] link (26fe30c0) e3 SPD Active Length=0 MaxLen=7 DT1 >>EndPt=0 Dev=0, PID=69(IN) (buf=273ddf14) >> 2: [e6fe30c0] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 >>EndPt=0 Dev=0, PID=e1(OUT) (buf=00000000) >> >>uhci_hcd 0000:00:07.2: uhci_result_control: failed with status 440000 >>[e6fe4240] link (26fe41e2) element (26fe3040) >> 0: [e6fe3040] link (26fe3080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 >>DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=255aeec8) >> 1: [e6fe3080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 >>EndPt=0 Dev=0, PID=69(IN) (buf=00000000) >> >>uhci_hcd 0000:00:07.2: uhci_result_control: failed with status 440000 >>[e6fe4240] link (26fe41e2) element (26fe3040) >> 0: [e6fe3040] link (26fe3080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 >>DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=255aeec8) >> 1: [e6fe3080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 >>EndPt=0 Dev=0, PID=69(IN) (buf=00000000) >> >>usb 1-2: device not accepting address 4, error -71 >>uhci_hcd 0000:00:07.2: port 2 portsc 008a >>hub 1-0:1.0: port 2, status 0100, change 0003, 12 Mb/s >>uhci_hcd 0000:00:07.2: port 2 portsc 0088 >> >>lspci -v >>00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] >>(rev 03) >> Flags: bus master, medium devsel, latency 8 >> Memory at d0000000 (32-bit, prefetchable) [size=128M] >> Capabilities: [a0] AGP version 2.0 >> Capabilities: [c0] Power Management version 2 >> >>00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] >>(prog-if 00 [Normal decode]) >> Flags: bus master, 66Mhz, medium devsel, latency 0 >> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 >> Memory behind bridge: da000000-dbffffff >> Prefetchable memory behind bridge: d8000000-d9ffffff >> Capabilities: [80] Power Management version 2 >> >>00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] >>(rev 40) >> Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge >> Flags: bus master, stepping, medium devsel, latency 0 >> Capabilities: [c0] Power Management version 2 >> >>00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) >>(prog-if 8a [Master SecP PriP]) >> Subsystem: VIA Technologies, Inc. Bus Master IDE >> Flags: bus master, medium devsel, latency 32 >> I/O ports at d000 [size=16] >> Capabilities: [c0] Power Management version 2 >> >>00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16) >>(prog-if 00 [UHCI]) >> Subsystem: Unknown device 0925:1234 >> Flags: bus master, medium devsel, latency 32, IRQ 10 >> I/O ports at d400 [size=32] >> Capabilities: [80] Power Management version 2 >> >>00:07.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16) >>(prog-if 00 [UHCI]) >> Subsystem: Unknown device 0925:1234 >> Flags: bus master, medium devsel, latency 32, IRQ 10 >> I/O ports at d800 [size=32] >> Capabilities: [80] Power Management version 2 >> >>00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) >> Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] >> Flags: medium devsel, IRQ 7 >> Capabilities: [68] Power Management version 2 >> >>00:09.0 SCSI storage controller: Adaptec AHA-2940U2/W >> Subsystem: Adaptec: Unknown device a180 >> Flags: bus master, medium devsel, latency 32, IRQ 11 >> BIST result: 00 >> I/O ports at dc00 [disabled] [size=256] >> Memory at dd200000 (64-bit, non-prefetchable) [size=4K] >> Expansion ROM at [disabled] [size=128K] >> Capabilities: [dc] Power Management version 1 >> >>00:0d.0 Ethernet controller: Intel Corp. 82557 [Ethernet Pro 100] (rev 05) >> Subsystem: Compaq Computer Corporation NC3120 >> Flags: bus master, medium devsel, latency 32, IRQ 10 >> Memory at dd203000 (32-bit, prefetchable) [size=4K] >> I/O ports at ec00 [size=32] >> Memory at dd100000 (32-bit, non-prefetchable) [size=1M] >> Expansion ROM at [disabled] [size=1M] >> Capabilities: [dc] Power Management version 1 >> >>01:00.0 VGA compatible controller: nVidia Corporation Vanta [NV6] (rev >>15) (prog-if 00 [VGA]) >> Subsystem: Unknown device 17f2:4010 >> Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 5 >> Memory at da000000 (32-bit, non-prefetchable) [size=16M] >> Memory at d8000000 (32-bit, prefetchable) [size=32M] >> Expansion ROM at [disabled] [size=64K] >> Capabilities: [60] Power Management version 1 >> Capabilities: [44] AGP version 2.0 >> >>cat /proc/bus/usb/devices >> >>T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 >>B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 >>D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 >>P: Vendor=0000 ProdID=0000 Rev= 2.06 >>S: Manufacturer=Linux 2.6.7 uhci_hcd >>S: Product=VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) >>S: SerialNumber=0000:00:07.3 >>C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA >>I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub >>E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms >> >>T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 >>B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 >>D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 >>P: Vendor=0000 ProdID=0000 Rev= 2.06 >>S: Manufacturer=Linux 2.6.7 uhci_hcd >>S: Product=VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller >>S: SerialNumber=0000:00:07.2 >>C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA >>I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub >>E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms >> >>T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 >>D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 >>P: Vendor=046d ProdID=c209 Rev= 1.03 >>S: Manufacturer=Logitech Inc. >>S: Product=WingMan Gamepad >>C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 40mA >>I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=(none) >>E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms >> >>cat /proc/interrupts >> CPU0 >> 0: 2040665 XT-PIC timer >> 1: 8 XT-PIC i8042 >> 2: 0 XT-PIC cascade >> 8: 1 XT-PIC rtc >> 10: 71185 XT-PIC EMU10K1, uhci_hcd, uhci_hcd, eth1 >> 11: 19586 XT-PIC aic7xxx >> 12: 30728 XT-PIC Bt87x audio, bttv0, eth0 >> 15: 18 XT-PIC ide1 >>NMI: 0 >>LOC: 2040654 >>ERR: 2234 >>MIS: 0 >> >>- >>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in >>the body of a message to majordomo@vger.kernel.org >>More majordomo info at http://vger.kernel.org/majordomo-info.html >>Please read the FAQ at http://www.tux.org/lkml/ >> >> >> > > > >