mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Espen Fjellvær Olsen" <eldiablo@svorka.net>
To: linux kernel mailing list <linux-kernel@vger.kernel.org>
Subject: TG3 uses all cpu
Date: Tue, 29 Jun 2004 19:37:13 +0200	[thread overview]
Message-ID: <40E1A8C9.8060405@svorka.net> (raw)

After som time with some network activity my machine becomes dead
slow, 'top' show that all cpu is in use, but no process is using it.
I tried to remove the tg3 module, i'm using that since i have a
Broadcome 5702 integrated nic, and then the cpu use went back to normal.
Kernel logs show nothing unusual.
The only kerneles i have noticed this on is them based on 2.6.7.

dmesg | grep eth gives this output:
eth0: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)]
(PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:e0:18:d2:6c:bf
eth0: HostTXDS[1] RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0]
WireSpeed[1] TSOcap[1]
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
eth0: no IPv6 routers present


lspci -vvv gives this info about my nic:

0000:02:05.0 Ethernet controller: Broadcom Corporation NetXtreme 
BCM5702X Gigabit Ethernet (rev 02)
        Subsystem: Asustek Computer, Inc.: Unknown device 80a9
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- 
ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (16000ns min), cache line size 08
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at e4000000 (64-bit, non-prefetchable) 
[size=e76f0000]
        Expansion ROM at 00010000 [disabled]
        Capabilities: [40] PCI-X non-bridge device.
                Command: DPERE- ERO- RBC=0 OST=0
                Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, 
DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-      Capabilities: [48] 
Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [50] Vital Product Data
        Capabilities: [58] Message Signalled Interrupts: 64bit+ 
Queue=0/3 Enable-
                Address: effffdff7ffffffc  Data: feff



                 reply	other threads:[~2004-06-29 17:31 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=40E1A8C9.8060405@svorka.net \
    --to=eldiablo@svorka.net \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®