From: Tim Chen <tim.c.chen@linux.intel.com>
To: Peter Zijlstra <peterz@infradead.org>
Cc: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>,
Juri Lelli <juri.lelli@redhat.com>,
Vincent Guittot <vincent.guittot@linaro.org>,
Ricardo Neri <ricardo.neri@intel.com>,
"Ravi V . Shankar" <ravi.v.shankar@intel.com>,
Ben Segall <bsegall@google.com>,
Daniel Bristot de Oliveira <bristot@redhat.com>,
Dietmar Eggemann <dietmar.eggemann@arm.com>,
Len Brown <len.brown@intel.com>, Mel Gorman <mgorman@suse.de>,
"Rafael J . Wysocki" <rafael.j.wysocki@intel.com>,
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>,
Steven Rostedt <rostedt@goodmis.org>,
Tim Chen <tim.c.chen@linux.intel.com>,
Valentin Schneider <vschneid@redhat.com>,
Ionela Voinescu <ionela.voinescu@arm.com>,
x86@kernel.org, linux-kernel@vger.kernel.org,
Shrikanth Hegde <sshegde@linux.vnet.ibm.com>,
Srikar Dronamraju <srikar@linux.vnet.ibm.com>,
naveen.n.rao@linux.vnet.ibm.com,
Yicong Yang <yangyicong@hisilicon.com>,
Barry Song <v-songbaohua@oppo.com>, Chen Yu <yu.c.chen@intel.com>,
Hillf Danton <hdanton@sina.com>
Subject: [Patch v2 4/6] sched/fair: Consider the idle state of the whole core for load balance
Date: Thu, 8 Jun 2023 15:32:30 -0700 [thread overview]
Message-ID: <40a57d36792622bc21bdcc09d5f6429e9c3e665c.1686263351.git.tim.c.chen@linux.intel.com> (raw)
In-Reply-To: <cover.1686263351.git.tim.c.chen@linux.intel.com>
From: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
should_we_balance() traverses the group_balance_mask (AND'ed with lb_env::
cpus) starting from lower numbered CPUs looking for the first idle CPU.
In hybrid x86 systems, the siblings of SMT cores get CPU numbers, before
non-SMT cores:
[0, 1] [2, 3] [4, 5] 6 7 8 9
b i b i b i b i i i
In the figure above, CPUs in brackets are siblings of an SMT core. The
rest are non-SMT cores. 'b' indicates a busy CPU, 'i' indicates an
idle CPU.
We should let a CPU on a fully idle core get the first chance to idle
load balance as it has more CPU capacity than a CPU on an idle SMT
CPU with busy sibling. So for the figure above, if we are running
should_we_balance() to CPU 1, we should return false to let CPU 7 on
idle core to have a chance first to idle load balance.
A partially busy (i.e., of type group_has_spare) local group with SMT
cores will often have only one SMT sibling busy. If the destination CPU
is a non-SMT core, partially busy, lower-numbered, SMT cores should not
be considered when finding the first idle CPU.
However, in should_we_balance(), when we encounter idle SMT first in partially
busy core, we prematurely break the search for the first idle CPU.
Higher-numbered, non-SMT cores is not given the chance to have
idle balance done on their behalf. Those CPUs will only be considered
for idle balancing by chance via CPU_NEWLY_IDLE.
Instead, consider the idle state of the whole SMT core.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Co-developed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
---
kernel/sched/fair.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 0b0904263d51..33246dce10db 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -10749,7 +10749,7 @@ static int active_load_balance_cpu_stop(void *data);
static int should_we_balance(struct lb_env *env)
{
struct sched_group *sg = env->sd->groups;
- int cpu;
+ int cpu, idle_smt = -1;
/*
* Ensure the balancing environment is consistent; can happen
@@ -10776,10 +10776,24 @@ static int should_we_balance(struct lb_env *env)
if (!idle_cpu(cpu))
continue;
+ /*
+ * Don't balance to idle SMT in busy core right away when
+ * balancing cores, but remember the first idle SMT CPU for
+ * later consideration. Find CPU on an idle core first.
+ */
+ if (!(env->sd->flags & SD_SHARE_CPUCAPACITY) && !is_core_idle(cpu)) {
+ if (idle_smt == -1)
+ idle_smt = cpu;
+ continue;
+ }
+
/* Are we the first idle CPU? */
return cpu == env->dst_cpu;
}
+ if (idle_smt == env->dst_cpu)
+ return true;
+
/* Are we the first CPU of this group ? */
return group_balance_cpu(sg) == env->dst_cpu;
}
--
2.32.0
next prev parent reply other threads:[~2023-06-08 22:32 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-08 22:32 [Patch v2 0/6] Enable Cluster Scheduling for x86 Hybrid CPUs Tim Chen
2023-06-08 22:32 ` [Patch v2 1/6] sched/fair: Determine active load balance for SMT sched groups Tim Chen
2023-06-12 11:13 ` Peter Zijlstra
2023-06-12 20:12 ` Tim Chen
2023-06-12 20:14 ` Peter Zijlstra
2023-06-12 11:16 ` Peter Zijlstra
2023-06-12 20:12 ` Tim Chen
2023-06-08 22:32 ` [Patch v2 2/6] sched/topology: Record number of cores in sched group Tim Chen
2023-06-12 11:29 ` Peter Zijlstra
2023-06-12 20:16 ` Tim Chen
2023-06-08 22:32 ` [Patch v2 3/6] sched/fair: Implement prefer sibling imbalance calculation between asymmetric groups Tim Chen
2023-06-12 12:05 ` Peter Zijlstra
2023-06-13 17:46 ` Tim Chen
2023-06-15 11:07 ` Peter Zijlstra
2023-06-15 17:01 ` Tim Chen
2023-06-08 22:32 ` Tim Chen [this message]
2023-06-08 22:32 ` [Patch v2 5/6] sched/x86: Add cluster topology to hybrid CPU Tim Chen
2023-06-08 22:32 ` [Patch v2 6/6] sched/debug: Dump domains' sched group flags Tim Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40a57d36792622bc21bdcc09d5f6429e9c3e665c.1686263351.git.tim.c.chen@linux.intel.com \
--to=tim.c.chen@linux.intel.com \
--cc=bristot@redhat.com \
--cc=bsegall@google.com \
--cc=dietmar.eggemann@arm.com \
--cc=hdanton@sina.com \
--cc=ionela.voinescu@arm.com \
--cc=juri.lelli@redhat.com \
--cc=len.brown@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mgorman@suse.de \
--cc=naveen.n.rao@linux.vnet.ibm.com \
--cc=peterz@infradead.org \
--cc=rafael.j.wysocki@intel.com \
--cc=ravi.v.shankar@intel.com \
--cc=ricardo.neri-calderon@linux.intel.com \
--cc=ricardo.neri@intel.com \
--cc=rostedt@goodmis.org \
--cc=srikar@linux.vnet.ibm.com \
--cc=srinivas.pandruvada@linux.intel.com \
--cc=sshegde@linux.vnet.ibm.com \
--cc=v-songbaohua@oppo.com \
--cc=vincent.guittot@linaro.org \
--cc=vschneid@redhat.com \
--cc=x86@kernel.org \
--cc=yangyicong@hisilicon.com \
--cc=yu.c.chen@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®