From: "Tony Huang 黃懷厚" <tony.huang@sunplus.com>
To: Rob Herring <robh@kernel.org>, Tony Huang <tonyhuang.sunplus@gmail.com>
Cc: "ulf.hansson@linaro.org" <ulf.hansson@linaro.org>,
"lhjeff911@gmail.com" <lhjeff911@gmail.com>,
"linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"p.zabel@pengutronix.de" <p.zabel@pengutronix.de>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"Wells Lu 呂芳騰" <wells.lu@sunplus.com>,
"Lh Kuo 郭力豪" <lh.Kuo@sunplus.com>
Subject: RE: [PATCH v3 1/2] dt-binding: mmc: Add mmc yaml file for Sunplus SP7021
Date: Thu, 10 Feb 2022 08:56:22 +0000 [thread overview]
Message-ID: <40d202104eec46d2a35445e0128a124f@sphcmbx02.sunplus.com.tw> (raw)
In-Reply-To: <YgQQ2nJa12xblXBX@robh.at.kernel.org>
Dear Robh:
> Subject: Re: [PATCH v3 1/2] dt-binding: mmc: Add mmc yaml file for Sunplus
> SP7021
>
> On Wed, Feb 09, 2022 at 06:41:06PM +0800, Tony Huang wrote:
> > Add mmc yaml file for Sunplus SP7021
> >
> > Signed-off-by: Tony Huang <tonyhuang.sunplus@gmail.com>
> > ---
> > Changes in v3:
> > - combine sdcard and eMMC into one driver.
> >
> > .../devicetree/bindings/mmc/sunplus-mmc.yaml | 76
> ++++++++++++++++++++++
> > MAINTAINERS | 6 ++
> > 2 files changed, 82 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/mmc/sunplus-mmc.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/mmc/sunplus-mmc.yaml
> > b/Documentation/devicetree/bindings/mmc/sunplus-mmc.yaml
> > new file mode 100644
> > index 0000000..8f44d13
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mmc/sunplus-mmc.yaml
> > @@ -0,0 +1,76 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) # Copyright
> > +(C) Sunplus Ltd. Co. 2021 %YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/mmc/sunplus-mmc.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: sunplus MMC controller
> > +
> > +allOf:
> > + - $ref: "mmc-controller.yaml"
> > +
> > +maintainers:
> > + - Tony Huang <tonyhuang.sunplus@gmail.com>
> > + - Li-hao Kuo <lhjeff911@gmail.com>
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - sunplus,sp7021-emmc
> > + - sunplus,sp7021-sdhci
>
> Why are these still different? Looking at the driver, it seems the settings are
> the same for both. And for clock speeds, we have properties to control them as
> they can be board specific.
>
The register base address of emmc and sd card are different.
eMMC and sdcard are individual hardware settings
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + clocks:
> > + minItems: 1
> > +
> > + resets:
> > + maxItems: 1
> > +
> > + max-frequency: true
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - clocks
> > + - resets
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/interrupt-controller/irq.h>
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > + mmc0: mmc@9c003b00 {
> > + compatible = "sunplus,sp7021-emmc";
> > + reg = <0x9c003b00 0x180>;
> > + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&clkc 0x4e>;
> > + resets = <&rstc 0x3e>;
> > + bus-width = <8>;
> > + max-frequency = <52000000>;
> > + non-removable;
> > + disable-wp;
> > + cap-mmc-highspeed;
> > + mmc-ddr-3_3v;
> > + no-sdio;
> > + no-sd;
> > + };
> > +
> > + mmc1: mmc@9c003e80 {
> > + compatible = "sunplus,sp7021-sdhci";
> > + reg = <0x9c003e80 0x280>;
> > + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&clkc 0x4f>;
> > + resets = <&rstc 0x3f>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&mmc1_mux &mmc1_mux_cd>;
> > + max-frequency = <52000000>;
> > + };
> > +...
> > diff --git a/MAINTAINERS b/MAINTAINERS index fb18ce7..cb46a55 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -18242,6 +18242,12 @@ L: netdev@vger.kernel.org
> > S: Maintained
> > F: drivers/net/ethernet/dlink/sundance.c
> >
> > +SUNPLUS MMC DRIVER
> > +M: Tony Huang <tonyhuang.sunplus@gmail.com>
> > +M: Li-hao Kuo <lhjeff911@gmail.com>
> > +S: Maintained
> > +F: Documentation/devicetree/bindings/mmc/sunplu-mmc.yaml
> > +
> > SUPERH
> > M: Yoshinori Sato <ysato@users.sourceforge.jp>
> > M: Rich Felker <dalias@libc.org>
> > --
> > 2.7.4
> >
> >
next prev parent reply other threads:[~2022-02-10 8:56 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-09 10:41 [PATCH v3 0/2] Add mmc driver for Sunplus SP7021 SOC Tony Huang
2022-02-09 10:41 ` [PATCH v3 1/2] dt-binding: mmc: Add mmc yaml file for Sunplus SP7021 Tony Huang
2022-02-09 19:07 ` Rob Herring
2022-02-10 8:56 ` Tony Huang 黃懷厚 [this message]
2022-02-11 12:52 ` Ulf Hansson
2022-02-14 2:02 ` Tony Huang 黃懷厚
2022-02-09 10:41 ` [PATCH v3 2/2] mmc: Add mmc driver " Tony Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40d202104eec46d2a35445e0128a124f@sphcmbx02.sunplus.com.tw \
--to=tony.huang@sunplus.com \
--cc=devicetree@vger.kernel.org \
--cc=lh.Kuo@sunplus.com \
--cc=lhjeff911@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=tonyhuang.sunplus@gmail.com \
--cc=ulf.hansson@linaro.org \
--cc=wells.lu@sunplus.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®