mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: busybox11 <busybox11th@gmail.com>, Denis Benato <denis.benato@linux.dev>
Cc: Corentin Chary <corentin.chary@gmail.com>,
	 "Luke D. Jones" <luke@ljones.dev>,
	Hans de Goede <hansg@kernel.org>,
	 platform-driver-x86@vger.kernel.org,
	LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] platform/x86: asus-armoury: add dGPU disable fallback DEVID for ProArt H7606 series
Date: Tue, 15 Sep 2026 23:38:19 +0300 (EEST)	[thread overview]
Message-ID: <40f1840a-e3e4-29d3-66b5-a13737224f99@linux.intel.com> (raw)
In-Reply-To: <20260810-asus_armoury_dgpu_new_devid-v1-1-0a5c845414e4@gmail.com>

On Mon, 10 Aug 2026, busybox11 via B4 Relay wrote:

> From: busybox11 <busybox11th@gmail.com>
> 
> Newer ASUS ProArt laptops (e.g. H7606 series) implement dGPU power
> control on WMI DEVID 0x00090120 instead of the usual 0x00090020.
> The default DEVID returns 0xFFFFFFFE on these models, so the
> dgpu_disable firmware attribute is never created and the dGPU cannot
> be re-enabled from Linux at all.
> 
> Add a fallback probe for device ID 0x00090120 following the same
> approach as the gpu_mux_dev_id probe.
> 
> Details for 0x00090120 (confirmed on H7606W using direct WMNB calls
> and inspecting the DSDT DEVS handler):
>   - Reading DSTS returns 0x00010001 when the dGPU is off (CUMA=1),
> 	or 0x00010000 when it's on.
>   - Writing DEVS: 0 enables the dGPU (calls PG00._ON() + Notifies
> 	PEGP, Device Check), and 1 disables or ejects it.
> 
> This behavior matches the dgpu_disable attribute (1 = disabled).
> 
> Signed-off-by: busybox11 <busybox11th@gmail.com>

Unfortunately, we cannot accept anonymous or pseudonym signed 
contributions so please sign off with your real name. For more 
information about signing of patches, please see:

Documentation/process/submitting-patches.rst

> ---
>  drivers/platform/x86/asus-armoury.c        | 32 +++++++++++++++++++++++++-----
>  include/linux/platform_data/x86/asus-wmi.h |  3 +++
>  2 files changed, 30 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/platform/x86/asus-armoury.c b/drivers/platform/x86/asus-armoury.c
> index 495dc1e31..f39b52451 100644
> --- a/drivers/platform/x86/asus-armoury.c
> +++ b/drivers/platform/x86/asus-armoury.c
> @@ -93,6 +93,7 @@ struct asus_armoury_priv {
>  
>  	u32 mini_led_dev_id;
>  	u32 gpu_mux_dev_id;
> +	u32 dgpu_disable_dev_id;
>  };
>  
>  static struct asus_armoury_priv asus_armoury = {
> @@ -452,8 +453,8 @@ static ssize_t gpu_mux_mode_current_value_store(struct kobject *kobj,
>  	if (err)
>  		return err;
>  
> -	if (armoury_has_devstate(ASUS_WMI_DEVID_DGPU)) {
> -		err = armoury_get_devstate(NULL, &result, ASUS_WMI_DEVID_DGPU);
> +	if (asus_armoury.dgpu_disable_dev_id) {
> +		err = armoury_get_devstate(NULL, &result, asus_armoury.dgpu_disable_dev_id);
>  		if (err)
>  			return err;
>  		if (result && !optimus) {
> @@ -507,7 +508,8 @@ static ssize_t dgpu_disable_current_value_store(struct kobject *kobj,
>  	}
>  
>  	scoped_guard(mutex, &asus_armoury.egpu_mutex) {
> -		err = armoury_set_devstate(attr, disable ? 1 : 0, NULL, ASUS_WMI_DEVID_DGPU);
> +		err = armoury_set_devstate(attr, disable ? 1 : 0, NULL,
> +					   asus_armoury.dgpu_disable_dev_id);
>  		if (err)
>  			return err;
>  	}
> @@ -516,7 +518,7 @@ static ssize_t dgpu_disable_current_value_store(struct kobject *kobj,
>  
>  	return count;
>  }
> -ASUS_WMI_SHOW_INT(dgpu_disable_current_value, ASUS_WMI_DEVID_DGPU);
> +ASUS_WMI_SHOW_INT(dgpu_disable_current_value, asus_armoury.dgpu_disable_dev_id);
>  ASUS_ATTR_GROUP_BOOL(dgpu_disable, "dgpu_disable", "Disable the dGPU");
>  
>  /* Values map for eGPU activation requests. */
> @@ -790,7 +792,6 @@ ASUS_ATTR_GROUP_INT_VALUE_ONLY_RO(nv_base_tgp, ATTR_NV_BASE_TGP, ASUS_WMI_DEVID_
>  static const struct asus_attr_group armoury_attr_groups[] = {
>  	{ &egpu_connected_attr_group, ASUS_WMI_DEVID_EGPU_CONNECTED },
>  	{ &egpu_enable_attr_group, ASUS_WMI_DEVID_EGPU },
> -	{ &dgpu_disable_attr_group, ASUS_WMI_DEVID_DGPU },
>  	{ &apu_mem_attr_group, ASUS_WMI_DEVID_APU_MEM },
>  
>  	{ &ppt_pl1_spl_attr_group, ASUS_WMI_DEVID_PPT_PL1_SPL },
> @@ -934,6 +935,21 @@ static int asus_fw_attr_add(void)
>  		}
>  	}
>  
> +	asus_armoury.dgpu_disable_dev_id = 0;
> +	if (armoury_has_devstate(ASUS_WMI_DEVID_DGPU))
> +		asus_armoury.dgpu_disable_dev_id = ASUS_WMI_DEVID_DGPU;
> +	else if (armoury_has_devstate(ASUS_WMI_DEVID_GPU_MODE))
> +		asus_armoury.dgpu_disable_dev_id = ASUS_WMI_DEVID_GPU_MODE;
> +
> +	if (asus_armoury.dgpu_disable_dev_id) {

Now I started to wonder why are we doing it like this and not using 
.is_visible?

This question applies to the similar, existing cases as well.

Denis?


-- 
 i.

> +		err = sysfs_create_group(&asus_armoury.fw_attr_kset->kobj,
> +					 &dgpu_disable_attr_group);
> +		if (err) {
> +			pr_err("Failed to create sysfs-group for dgpu_disable\n");
> +			goto err_remove_gpu_mux_group;
> +		}
> +	}
> +
>  	for (i = 0; i < ARRAY_SIZE(armoury_attr_groups); i++) {
>  		if (!armoury_has_devstate(armoury_attr_groups[i].wmi_devid))
>  			continue;
> @@ -971,6 +987,9 @@ static int asus_fw_attr_add(void)
>  			sysfs_remove_group(&asus_armoury.fw_attr_kset->kobj,
>  					   armoury_attr_groups[i].attr_group);
>  	}
> +	if (asus_armoury.dgpu_disable_dev_id)
> +		sysfs_remove_group(&asus_armoury.fw_attr_kset->kobj, &dgpu_disable_attr_group);
> +err_remove_gpu_mux_group:
>  	if (asus_armoury.gpu_mux_dev_id)
>  		sysfs_remove_group(&asus_armoury.fw_attr_kset->kobj, &gpu_mux_mode_attr_group);
>  err_remove_mini_led_group:
> @@ -1143,6 +1162,9 @@ static void __exit asus_fw_exit(void)
>  					   armoury_attr_groups[i].attr_group);
>  	}
>  
> +	if (asus_armoury.dgpu_disable_dev_id)
> +		sysfs_remove_group(&asus_armoury.fw_attr_kset->kobj, &dgpu_disable_attr_group);
> +
>  	if (asus_armoury.gpu_mux_dev_id)
>  		sysfs_remove_group(&asus_armoury.fw_attr_kset->kobj, &gpu_mux_mode_attr_group);
>  
> diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h
> index c29962d5b..faeae70f4 100644
> --- a/include/linux/platform_data/x86/asus-wmi.h
> +++ b/include/linux/platform_data/x86/asus-wmi.h
> @@ -138,6 +138,9 @@
>  /* dgpu on/off */
>  #define ASUS_WMI_DEVID_DGPU		0x00090020
>  
> +/* dgpu power/mode switch, dgpu_disable fallback on some ProArt */
> +#define ASUS_WMI_DEVID_GPU_MODE		0x00090120
> +
>  #define ASUS_WMI_DEVID_APU_MEM		0x000600C1
>  
>  #define ASUS_WMI_DEVID_DGPU_BASE_TGP	0x00120099
> 
> ---
> base-commit: 3f008280327ba5ad132965abab0c7846283cef0c
> change-id: 20260810-asus_armoury_dgpu_new_devid-168aa5da290e
> 
> Best regards,
> --  
> busybox11 <busybox11th@gmail.com>
> 
> 

  reply	other threads:[~2026-09-15 20:38 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-10 10:42 busybox11 via B4 Relay
2026-09-15 20:38 ` Ilpo Järvinen [this message]
2026-09-15 20:48   ` Denis Benato
2026-09-15 20:56     ` Ilpo Järvinen
2026-09-15 21:03       ` Denis Benato

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=40f1840a-e3e4-29d3-66b5-a13737224f99@linux.intel.com \
    --to=ilpo.jarvinen@linux.intel.com \
    --cc=busybox11th@gmail.com \
    --cc=corentin.chary@gmail.com \
    --cc=denis.benato@linux.dev \
    --cc=hansg@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luke@ljones.dev \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®