From: Nick Kossifidis <mickflemm@gmail.com>
To: Jiri Slaby <jirislaby@gmail.com>
Cc: "John W. Linville" <linville@tuxdriver.com>,
linux-wireless@vger.kernel.org, ath5k-devel@venema.h4ckr.net,
linux-kernel@vger.kernel.org,
"Luis R. Rodriguez" <lrodriguez@atheros.com>,
Bob Copeland <me@bobcopeland.com>
Subject: Re: [PATCH 1/2] ath5k: constify stuff
Date: Sat, 7 Mar 2009 14:03:29 +0200 [thread overview]
Message-ID: <40f31dec0903070403t20ee10d8y8ef43a622987d519@mail.gmail.com> (raw)
In-Reply-To: <1236418002-2189-1-git-send-email-jirislaby@gmail.com>
2009/3/7 Jiri Slaby <jirislaby@gmail.com>:
> Make some structures const to place them in .rodata, since we won't
> change them.
>
> Most important parts of objdump -h:
> - 0 .text 00011170
> + 0 .text 00011140
> - 5 .rodata 0000828e
> + 5 .rodata 0000895e
> - 13 .data 00000560
> + 13 .data 00000110
> - 14 .devinit.data 00000260
>
> Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
> Cc: Nick Kossifidis <mickflemm@gmail.com>
> Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
> Cc: Bob Copeland <me@bobcopeland.com>
> ---
> drivers/net/wireless/ath5k/attach.c | 13 ++++++-------
> drivers/net/wireless/ath5k/base.c | 8 ++++----
> drivers/net/wireless/ath5k/debug.c | 10 +++++-----
> drivers/net/wireless/ath5k/reset.c | 2 +-
> 4 files changed, 16 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/net/wireless/ath5k/attach.c b/drivers/net/wireless/ath5k/attach.c
> index 05bc5cb..656cb9d 100644
> --- a/drivers/net/wireless/ath5k/attach.c
> +++ b/drivers/net/wireless/ath5k/attach.c
> @@ -34,14 +34,14 @@
> static int ath5k_hw_post(struct ath5k_hw *ah)
> {
>
> - int i, c;
> - u16 cur_reg;
> - u16 regs[2] = {AR5K_STA_ID0, AR5K_PHY(8)};
> - u32 var_pattern;
> - u32 static_pattern[4] = {
> + static const u32 static_pattern[4] = {
> 0x55555555, 0xaaaaaaaa,
> 0x66666666, 0x99999999
> };
> + static const u16 regs[2] = { AR5K_STA_ID0, AR5K_PHY(8) };
> + int i, c;
> + u16 cur_reg;
> + u32 var_pattern;
> u32 init_val;
> u32 cur_val;
>
> @@ -106,7 +106,6 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
> {
> struct ath5k_hw *ah;
> struct pci_dev *pdev = sc->pdev;
> - u8 mac[ETH_ALEN] = {};
> int ret;
> u32 srev;
>
> @@ -312,7 +311,7 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
> }
>
> /* MAC address is cleared until add_interface */
> - ath5k_hw_set_lladdr(ah, mac);
> + ath5k_hw_set_lladdr(ah, (u8[ETH_ALEN]){});
>
> /* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */
> memset(ah->ah_bssid, 0xff, ETH_ALEN);
> diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
> index 08d691d..780fe6c 100644
> --- a/drivers/net/wireless/ath5k/base.c
> +++ b/drivers/net/wireless/ath5k/base.c
> @@ -79,7 +79,7 @@ MODULE_VERSION("0.6.0 (EXPERIMENTAL)");
>
>
> /* Known PCI ids */
> -static struct pci_device_id ath5k_pci_id_table[] __devinitdata = {
> +static const struct pci_device_id ath5k_pci_id_table[] = {
> { PCI_VDEVICE(ATHEROS, 0x0207), .driver_data = AR5K_AR5210 }, /* 5210 early */
> { PCI_VDEVICE(ATHEROS, 0x0007), .driver_data = AR5K_AR5210 }, /* 5210 */
> { PCI_VDEVICE(ATHEROS, 0x0011), .driver_data = AR5K_AR5211 }, /* 5311 - this is on AHB bus !*/
> @@ -103,7 +103,7 @@ static struct pci_device_id ath5k_pci_id_table[] __devinitdata = {
> MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table);
>
> /* Known SREVs */
> -static struct ath5k_srev_name srev_names[] = {
> +static const struct ath5k_srev_name srev_names[] = {
> { "5210", AR5K_VERSION_MAC, AR5K_SREV_AR5210 },
> { "5311", AR5K_VERSION_MAC, AR5K_SREV_AR5311 },
> { "5311A", AR5K_VERSION_MAC, AR5K_SREV_AR5311A },
> @@ -142,7 +142,7 @@ static struct ath5k_srev_name srev_names[] = {
> { "xxxxx", AR5K_VERSION_RAD, AR5K_SREV_UNKNOWN },
> };
>
> -static struct ieee80211_rate ath5k_rates[] = {
> +static const struct ieee80211_rate ath5k_rates[] = {
> { .bitrate = 10,
> .hw_value = ATH5K_RATE_CODE_1M, },
> { .bitrate = 20,
> @@ -248,7 +248,7 @@ static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
> struct ieee80211_bss_conf *bss_conf,
> u32 changes);
>
> -static struct ieee80211_ops ath5k_hw_ops = {
> +static const struct ieee80211_ops ath5k_hw_ops = {
> .tx = ath5k_tx,
> .start = ath5k_start,
> .stop = ath5k_stop,
> diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c
> index 413ed68..9770bb3 100644
> --- a/drivers/net/wireless/ath5k/debug.c
> +++ b/drivers/net/wireless/ath5k/debug.c
> @@ -82,14 +82,14 @@ static int ath5k_debugfs_open(struct inode *inode, struct file *file)
> /* debugfs: registers */
>
> struct reg {
> - char *name;
> + const char *name;
> int addr;
> };
>
> #define REG_STRUCT_INIT(r) { #r, r }
>
> /* just a few random registers, might want to add more */
> -static struct reg regs[] = {
> +static const struct reg regs[] = {
> REG_STRUCT_INIT(AR5K_CR),
> REG_STRUCT_INIT(AR5K_RXDP),
> REG_STRUCT_INIT(AR5K_CFG),
> @@ -142,7 +142,7 @@ static struct reg regs[] = {
>
> static void *reg_start(struct seq_file *seq, loff_t *pos)
> {
> - return *pos < ARRAY_SIZE(regs) ? ®s[*pos] : NULL;
> + return *pos < ARRAY_SIZE(regs) ? (void *)®s[*pos] : NULL;
> }
>
> static void reg_stop(struct seq_file *seq, void *p)
> @@ -153,7 +153,7 @@ static void reg_stop(struct seq_file *seq, void *p)
> static void *reg_next(struct seq_file *seq, void *p, loff_t *pos)
> {
> ++*pos;
> - return *pos < ARRAY_SIZE(regs) ? ®s[*pos] : NULL;
> + return *pos < ARRAY_SIZE(regs) ? (void *)®s[*pos] : NULL;
> }
>
> static int reg_show(struct seq_file *seq, void *p)
> @@ -290,7 +290,7 @@ static const struct file_operations fops_reset = {
>
> /* debugfs: debug level */
>
> -static struct {
> +static const struct {
> enum ath5k_debug_level level;
> const char *name;
> const char *desc;
> diff --git a/drivers/net/wireless/ath5k/reset.c b/drivers/net/wireless/ath5k/reset.c
> index 1531ccd..685dc21 100644
> --- a/drivers/net/wireless/ath5k/reset.c
> +++ b/drivers/net/wireless/ath5k/reset.c
> @@ -102,7 +102,7 @@ static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
> * index into rates for control rates, we can set it up like this because
> * this is only used for AR5212 and we know it supports G mode
> */
> -static int control_rates[] =
> +static const unsigned int control_rates[] =
> { 0, 1, 1, 1, 4, 4, 6, 6, 8, 8, 8, 8 };
>
> /**
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
--
GPG ID: 0xD21DB2DB
As you read this post global entropy rises. Have Fun ;-)
Nick
prev parent reply other threads:[~2009-03-07 12:03 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-07 9:26 Jiri Slaby
2009-03-07 9:26 ` [PATCH 2/2] ath5k: don't change mac in eeprom_read_mac on error Jiri Slaby
2009-03-07 12:06 ` [ath5k-devel] " Nick Kossifidis
2009-03-07 12:34 ` Bob Copeland
2009-03-07 12:03 ` Nick Kossifidis [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40f31dec0903070403t20ee10d8y8ef43a622987d519@mail.gmail.com \
--to=mickflemm@gmail.com \
--cc=ath5k-devel@venema.h4ckr.net \
--cc=jirislaby@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=lrodriguez@atheros.com \
--cc=me@bobcopeland.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®