mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Benoit Boissinot" <bboissin@gmail.com>
To: "Andrew Morton" <akpm@osdl.org>,
	"Linux Kernel" <linux-kernel@vger.kernel.org>
Subject: [2.6.19-rc6-mm2] Lost files on ext3 after suspend
Date: Sat, 16 Dec 2006 16:11:30 +0100	[thread overview]
Message-ID: <40f323d00612160711h5d740767ua0289fffcbe70738@mail.gmail.com> (raw)

Ok, since it is the second time it happened I decided to report it.

Last week I lost some files in my home directory (at least .gnome
.firefox .bashrc .Xauthority), I think it was after a suspend.
Yesterday exactly the same thing happened (same kernel 2.6.19-rc6-mm2,
I haven't upgraded because I feared data loss on ext3 with newer
kernel as some of them were reported).

I'm using the ata_piix driver (from dmesg):
ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0x1810 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
scsi0 : ata_piix
ata1.00: ATA-6, max UDMA/100, 117210240 sectors: LBA
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/100
scsi1 : ata_piix
ata2: port disabled. ignoring.
scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK6026GA PA20 PQ: 0 ANSI: 5
SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: Attached scsi disk sda

with ext3 (no fancy options).

I had no errors with fsck -f or badblocks.

regards,

Benoit

                 reply	other threads:[~2006-12-16 15:11 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=40f323d00612160711h5d740767ua0289fffcbe70738@mail.gmail.com \
    --to=bboissin@gmail.com \
    --cc=akpm@osdl.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®