From: Elmar Hinz <elmar.hinz@vcd-berlin.de>
To: Alan Cox <alan@redhat.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: PATCH: Add support for IT8212 IDE controllers
Date: Fri, 06 Aug 2004 23:58:33 +0200 [thread overview]
Message-ID: <4113FF09.6050806@vcd-berlin.de> (raw)
In-Reply-To: <20040805104700.GB11584@devserv.devel.redhat.com>
Alan Cox wrote:
> On Wed, Aug 04, 2004 at 04:03:43PM +0200, Elmar Hinz wrote:
>
>>When I set in the bios RAID 1 there comes an message similar
>>INVALID GEOMETRY: 0 PHYSICAL HEADS?
>>and booting stops.
>
>
> At which point
>
>
>>but booting continous and I can use the disks.
>>hdparm => 15.70 MB/sec
>
>
> A bit slow.. thanks
>
>
I am sorry. I can't test the card in the RAID mode anymore, because it
is in use meanwhile with NORMAL mode an a software raid. Maybe the
output of dmesg in NORMAL mode is usefull for you.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
IT8212: IDE controller at PCI slot 0000:00:09.0
PCI: Found IRQ 10 for device 0000:00:09.0
PCI: Sharing IRQ 10 with 0000:00:01.2
(Changing the slots IRQ by bios alters both devices 0000:00:01.2 and
0000:00:09.0, so they seem to belong both to the card/disks)
IT8212: chipset revision 17
IT8212: 100% native mode on irq 10
ide2: BM-DMA at 0xb000-0xb007, BIOS settings: hde:DMA, hdf:pio
it8212: controller in smart mode.
it8212: BIOS seleted a 66MHz clock.
ide3: BM-DMA at 0xb008-0xb00f, BIOS settings: hdg:DMA, hdh:pio
it8212: BIOS seleted a 66MHz clock.
hde: WDC WD800JB-00FMA0, ATA DISK drive
ide2 at 0xd400-0xd407,0xd002 on irq 10
hdg: WDC WD800JB-00FMA0, ATA DISK drive
ide3 at 0xb800-0xb807,0xb402 on irq 10
hdc: ATAPI CDROM, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hde: max request size: 128KiB
hde: recal_intr: status=0x51 { DriveReady SeekComplete Error }
hde: recal_intr: error=0x04 { DriveStatusError }
hde: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(33)
hde: irq timeout: status=0xd0 { Busy }
/dev/ide/host2/bus0/target0/lun0: p1 < p5 p6 p7 p8 >
hdg: max request size: 128KiB
hdg: recal_intr: status=0x51 { DriveReady SeekComplete Error }
hdg: recal_intr: error=0x04 { DriveStatusError }
hdg: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(33)
hdg: irq timeout: status=0xd0 { Busy }
/dev/ide/host2/bus1/target0/lun0: p1 < p5 p6 p7 p8 >
next prev parent reply other threads:[~2004-08-06 21:58 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <2obsK-5Ni-13@gated-at.bofh.it>
2004-08-03 11:16 ` Elmar Hinz
2004-08-03 10:50 ` Alan Cox
2004-08-03 12:18 ` Elmar Hinz
2004-08-03 20:42 ` Elmar Hinz
2004-08-04 14:03 ` Elmar Hinz
2004-08-05 10:47 ` Alan Cox
2004-08-06 21:58 ` Elmar Hinz [this message]
2004-08-14 19:32 ` Alan Cox
2004-07-31 23:22 Alan Cox
2004-08-01 19:22 ` Ian Hastie
2004-08-01 20:10 ` Alan Cox
2004-08-01 23:05 ` Alan Cox
2004-08-06 0:45 ` Ian Hastie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4113FF09.6050806@vcd-berlin.de \
--to=elmar.hinz@vcd-berlin.de \
--cc=alan@redhat.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome