Re: [PATCH net-next] net: phy: at803x: remove at803x_aneg_done()

[Heiner Kallweit <hkallweit1@gmail.com>]

On 18.03.2021 15:23, Michael Walle wrote:
> at803x_aneg_done() is pretty much dead code since the patch series
> "net: phy: improve and simplify phylib state machine" [1]. Remove it.
> 

Well, it's not dead, it's resting .. There are few places where
phy_aneg_done() is used. So you would need to explain:
- why these users can't be used with this PHY driver
- or why the aneg_done callback isn't needed here and the
  genphy_aneg_done() fallback is sufficient


> [1] https://lore.kernel.org/netdev/922c223b-7bc0-e0ec-345d-2034b796af91@gmail.com/
> 
> Suggested-by: Vladimir Oltean <olteanv@gmail.com>
> Signed-off-by: Michael Walle <michael@walle.cc>
> ---
>  drivers/net/phy/at803x.c | 31 -------------------------------
>  1 file changed, 31 deletions(-)
> 
> diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
> index c2aa4c92edde..d7799beb811c 100644
> --- a/drivers/net/phy/at803x.c
> +++ b/drivers/net/phy/at803x.c
> @@ -751,36 +751,6 @@ static void at803x_link_change_notify(struct phy_device *phydev)
>  	}
>  }
>  
> -static int at803x_aneg_done(struct phy_device *phydev)
> -{
> -	int ccr;
> -
> -	int aneg_done = genphy_aneg_done(phydev);
> -	if (aneg_done != BMSR_ANEGCOMPLETE)
> -		return aneg_done;
> -
> -	/*
> -	 * in SGMII mode, if copper side autoneg is successful,
> -	 * also check SGMII side autoneg result
> -	 */
> -	ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
> -	if ((ccr & AT803X_MODE_CFG_MASK) != AT803X_MODE_CFG_SGMII)
> -		return aneg_done;
> -
> -	/* switch to SGMII/fiber page */
> -	phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr & ~AT803X_BT_BX_REG_SEL);
> -
> -	/* check if the SGMII link is OK. */
> -	if (!(phy_read(phydev, AT803X_PSSR) & AT803X_PSSR_MR_AN_COMPLETE)) {
> -		phydev_warn(phydev, "803x_aneg_done: SGMII link is not ok\n");
> -		aneg_done = 0;
> -	}
> -	/* switch back to copper page */
> -	phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);
> -
> -	return aneg_done;
> -}
> -
>  static int at803x_read_status(struct phy_device *phydev)
>  {
>  	int ss, err, old_link = phydev->link;
> @@ -1198,7 +1168,6 @@ static struct phy_driver at803x_driver[] = {
>  	.resume			= at803x_resume,
>  	/* PHY_GBIT_FEATURES */
>  	.read_status		= at803x_read_status,
> -	.aneg_done		= at803x_aneg_done,
>  	.config_intr		= &at803x_config_intr,
>  	.handle_interrupt	= at803x_handle_interrupt,
>  	.get_tunable		= at803x_get_tunable,
>