Re: [PATCH RFC v4 06/13] regulator: set required ops for monitoring workarounds

[Matti Vaittinen <mazziesaccount@gmail.com>]

On 6/20/23 23:02, Benjamin Bara wrote:
> From: Benjamin Bara <benjamin.bara@skidata.com>
> 
> If the core should be able to handle the monitoring workarounds, certain
> regulator ops are required:
> - is_enabled() to decide whether a monitor should be turned off or not.
> - get_active_protections() to find out if the device-tree is missing
>    active protections.
> - get_mode() if the regulator is in a mode where monitoring is not
>    supported.
> 
> Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>

Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>

> ---
>   drivers/regulator/core.c | 34 ++++++++++++++++++++++++++++++++++
>   1 file changed, 34 insertions(+)
> 
> diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
> index dc741ac156c3..ca5d6ba889dc 100644
> --- a/drivers/regulator/core.c
> +++ b/drivers/regulator/core.c
> @@ -5540,6 +5540,40 @@ regulator_register(struct device *dev,
>   		goto rinse;
>   	}
>   
> +	/* monitor workaround properties require ops to ensure functionality. */
> +	if (regulator_desc->mon_disable_reg_disabled ||
> +	    regulator_desc->mon_disable_reg_set_higher ||
> +	    regulator_desc->mon_disable_reg_set_lower ||
> +	    regulator_desc->mon_unsupported_reg_modes) {
> +		/*
> +		 * is_enabled() to make sure the monitors aren't disabled on
> +		 * disabled regulators.
> +		 */
> +		if (!regulator_desc->ops->is_enabled) {
> +			ret = -EINVAL;
> +			goto rinse;
> +		}
> +
> +		/*
> +		 * get_active_protections() to know if a regulator is monitored
> +		 * without the device-tree being aware of it.
> +		 */
> +		if (!regulator_desc->ops->get_active_protections) {
> +			ret = -EINVAL;
> +			goto rinse;
> +		}
> +
> +		/*
> +		 * mon_unsupported_reg_modes property requires get_mode() to get
> +		 * the old state in case a state switch is failing.
> +		 */
> +		if (regulator_desc->mon_unsupported_reg_modes &&
> +		    !regulator_desc->ops->get_mode) {
> +			ret = -EINVAL;
> +			goto rinse;
> +		}
> +	}
> +
>   	rdev = kzalloc(sizeof(struct regulator_dev), GFP_KERNEL);
>   	if (rdev == NULL) {
>   		ret = -ENOMEM;
> 

-- 
Matti Vaittinen
Linux kernel developer at ROHM Semiconductors
Oulu Finland

~~ When things go utterly wrong vim users can always type :help! ~~